EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 264 (2021) E3S Web Conf., 264 (2021) 05010 References
Open Access
Issue
E3S Web Conf.
Volume 264, 2021
International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2021)
Article Number 05010
Number of page(s) 13
Section Engineering Materials Science, Intelligent Transport Systems and Transport Logistics
DOI https://doi.org/10.1051/e3sconf/202126405010
Published online 02 June 2021
  1. Perevezentsev V.N. The theory of evolution of the microstructure of superplastic alloys and ceramics, superplasticity, London, pp. 51–59. (1995) [Google Scholar]
  2. Saydakhmedov R.Kh., Akhmedov A.B., Bakhadirov K.G., Ibodullaev Sh. R. Some aspects of the process of cold rolling of a metal strip using symmetric and asymmetric technology, Innovations in mechanical engineering, (InMash-2019) X International Scientific and Practical Conference. Collection of works. November 26-29. Kemerovo, Russia. 2019, pp. 545–549.(2019). [Google Scholar]
  3. Mavlonov T.M., Akhmedov A.B., Saidakhmedov R.Kh., Bakhadirov K.G. Simulation modeling of cold rolled metal strip by asymmetric technology, Construction Mechanics, Hydraulics and Water Resources Engineering (CONMECHYDRO-2020). IOP Conference Series: Materials Science and Engineering. International Scientific Conference held on April 23-25, 2020 in Tashkent, Uzbekistan. p. 7. (2019) [Google Scholar]
  4. Akhmedov A. B., Saydakhmedov R. Kh., Ibodulloev Sh. R., Kholmanov N. Y. Features Of Stress-Deformed State Of Rolled Sheet By Asymmetric Technology, The American Journal of Engineering And Technology. (02), 08, pp. 53–58.( 2020). [Google Scholar]
  5. Dieter G.E. Handbook of Workability and Process Design, IBSN 0-87170-778-0, ASM International. (2003). [Google Scholar]
  6. Avitzur, B. Handbook of Metal-Forming Processes, ISBN 0-471-03474-6, Wiley-Interscience Publication, New York. (1983). [Google Scholar]
  7. Dieter, G. E. Mechanical Metallurgy SI Metric Edition, McGraw-Hill Book Co. (1988). [Google Scholar]
  8. Traino A.I. Improving the efficiency of machining rolls sheet mills, Proceedings of the second congress of distributors, - M.: Chermetinformation AO. pp. 344–346. (1998). [Google Scholar]
  9. Lukash A.S. Improvement of the technological process and mathematical model of cold rolling of thin strips of copper and brass to improve their quality. Dissertation of the candidate of technical sciences. –Moscow, p. 132. (2016). [Google Scholar]
  10. Brovman M.Ya. Application of the theory of plasticity in rolling, M.: Metallurgy, p. 247, (1965). [Google Scholar]
  11. Cui, Q. and K. Ohori ; Mater. Sci. Tech., (16), p.1095. (2000), [Google Scholar]
  12. Inoue T., Torizuka S. and K. Nagai; Mater. Sci. Tech., (18). p.1007. (2002). [Google Scholar]
  13. Mazur V.L., Nogovitsyn A.V. The theory and technology of sheet rolling (numerical analysis and technical applications), - Dnepropetrovsk: PBA Dnipro -VAL, p. 500, (2010). [Google Scholar]
  14. Golubchenko A.K., Mazur V.L., Binkevich E.V. The influence of the angle of entry of the strip into rolls on the parameters of the rolling process, Metallurgical and mining industry, (3). p. 20–24.(1994). [Google Scholar]
  15. Kattakulov F., Muslimov T., Khusainov A., Vokhidov O., Sultanov S. Water resource saving in irrigation networks through improving the efficiency of reinforced concrete coatings, IOP Conference Series: Materials Science and Engineering, 883(1), 012053, (2020) [Google Scholar]
  16. Mazur V.L., Golubchenko A.K., Binkevich E.V. Calculation of parameters of the process of hot asymmetric rolling of thick strips, Steel (1). pp. 39–41. (1994). [Google Scholar]
  17. A.G. Svichinsky, E.V. Binkevich, V.L. Mazur, A.K. Holubchenko, Asymmetric hot rolling on a broadband mill,/ Steel. (11). pp. 41–44. (1994). [Google Scholar]
  18. А.G. Svichinsky, V.L. Mazur, E.V. Binkevich, A.K. Holubchenko, Calculation and control of the process of asymmetric hot rolling by the method of slip lines and nonlinear programming, News of the Russian Academy of Sciences. Metalspp. p 70–79. (1993). [Google Scholar]
  19. V.А. Nikolaev, V.L. Mazur, A.K. Holubchenko, E.V. Binkevich, Theory and technology of asymmetric rolling, M.: Agency “Informat”. p 262. (1996). [Google Scholar]
  20. Lebensohn, R.A. and C.N. Tomé (1993). A self-consistent anisotropic approach for the simulation of plastic degradation : for zirconium alloys. Acta Metallurgicaet Materialia 41 (9): pp 2611–2624. [Google Scholar]
  21. Lebensohn, R.A. and C.N. Tomé (1994). A self-consistent viscoplastic model: prediction of rolling textures of anisotropic polycrystals. Materials Science and Engineering: A 175 (1-2): pp 71–82. [Google Scholar]
  22. Lebensohn, R.A. and G.R. Canova, A self-consistent approach for modeling the two-phase polycrystals : Application to titanium alloys, Acta Materialia 45 (9): pp. 3687–3694, (1997) [Google Scholar]
  23. Rybakov V., Jos V., Raimova I., and Kudryavtsev K. Modal analysis of frameless arches made of thin-walled steel profiles. IOP Conf. Ser. Mater. Sci. Eng. 883, (2020). [Google Scholar]
  24. Kolbasnikov N.G., Theory metalworking d ION. Physical basis of strength and ductility of metals, Tutorial. St. Petersburg. Publisher SPbGPU, p 268. (2004). [Google Scholar]
  25. Amanov, A., Bahadirov, G., Amanov, T., Tsoy, G., & Nabiev, A. Determination of Strain Properties of the Leather Semi-Finished Product and Moisture-Removing Materials of Compression Rolls. Materials, 12 (21), pp 3620. doi:10.3390/ma12213620. (2019). [Google Scholar]
  26. Bahadirov, G., Sultanov, T., Umarov, B., & Bakhadirov, K. Advanced machine for sorting potatoes tubers. IOP Conference Series: Materials Science and Engineering, 883, 012132, (2020), doi:10.1088/1757-899x/883/1/012132, [Google Scholar]
  27. Bahadirov G.A., Sultanov T.Z., Abdukarimov A., Kinematic analysis of tooth-lever differential transmission mechanisms. IOP Conf. Ser.: Earth Environ. Sci. 614 012101. doi:10.1088/1755-1315/614/1/012101. (2020). [Google Scholar]
  28. Bahadirov G.A., Sultanov T.Z., Abdukarimov A., Comparative analysis of two gear-lever differential inter-roller transmission mechanisms. IOP Conf. Ser.: Earth Environ. Sci. 614 012102. doi:10.1088/1755-1315/614/1/012102. (2020). [Google Scholar]
  29. Adilkhodjaev A., Hasanov B., Shaumarov S., Kondrashchenko V. Aerated concrete with predetermined pore parameters for the exterior walls of energy efficient buildings, IOP Conference Series: Materials Science and Engineering, 1030(1), 012006, (2021) [Google Scholar]
  30. Khasanov B., Vatin N., Mirzaev T., Suyunov A., Radjabov M. Analysis of the mode of squeezing out excess water for mixing concrete mixture in the process of peristaltic compaction, IOP Conference Series: Materials Science and Engineering, 1030(1), 012021, (2021) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.