Open Access
Issue
E3S Web Conf.
Volume 274, 2021
2nd International Scientific Conference on Socio-Technical Construction and Civil Engineering (STCCE – 2021)
Article Number 03012
Number of page(s) 14
Section Building Constructions, Buildings and Structures
DOI https://doi.org/10.1051/e3sconf/202127403012
Published online 18 June 2021
  1. R.M. Lawson et al. Developments in pre-fabricated systems in light steel and modular construction, Structural Engineer 83 6, 28–35 (2005). [Google Scholar]
  2. L. Jaillon, C.S. Poon The evolution of prefabricated residential building systems in Hong Kong: A review of the public and the private sector, Automation in Construction 18 3, 239–248 (2009). [CrossRef] [Google Scholar]
  3. R.K. Mukhametrakhimov, L.V. Lukmanova. Structure and properties of mortar printed on a 3D-printer, Mag. Civ. Eng. 102 2, 10206 (2021). [Google Scholar]
  4. R. Mukhametrakhimov, L. Lukmanova. Influence of the technological properties of cement-sand mortar on the quality of 3D-printed products, IOP Conference Series: Materials Science and Engineering 890 1, (2020). [CrossRef] [Google Scholar]
  5. R.K. Mukhametrakhimov. V.I.M. Additive technology of erection of buildings and structures using building 3D-printer, Izv. KGASU 4 42, 350–359 (2017). [Google Scholar]
  6. W. Ferdous et al. New advancements, challenges and opportunities of multi-storey modular buildings - A state-of-the-art review, Engineering Structures 183, 883–893 (2019). [CrossRef] [Google Scholar]
  7. J.P. Hao et al. Research and applications of prefabricated steel structure building systems, Gongcheng Lixue/Engineering Mechanics. Tsinghua University 34 1, 1–13 (2017). [Google Scholar]
  8. I.P. Kozhushkov, A.P. Smirnov, K.V. Kolonskikh. Perspective Block-Modular Methods for the Construction of Oil and Gas Facilities Using Superblocks, PROneft’. Proffessional’no o Nefti 2, 71–75 (2019). DOI: 10.24887/2587-7399-2019-2-71-75. [CrossRef] [Google Scholar]
  9. A.G. Ogydov, L.I. Andrianova, A.P. Pneva. Implementation of an industrial construction method using units of maximum factory readiness, Materials of the International Scientific and Technical Conference dedicated to the 50th anniversary of the Tyumen Industrial Institute, 121–123 (2013). [Google Scholar]
  10. M. Zakharova, A. Ponomarev. Experience in Constructing Buildings and Structures Using Modular Technology, PNRPU Construction and Architecture Bulletin 8 (1), 148–155 (2017). DOI: 10.15593/2224-9826/2017.1.13. [CrossRef] [Google Scholar]
  11. V.L. Sel'chenkov. Typical technical solutions for ventilation and climate control systems for GIS block-boxes, Industrial automation 10, 48–50 (2009). [Google Scholar]
  12. M.J. Jakovlev. Analysis of the impact of explosive loads on the elements of an industrial building, Topical issues of modern science: Collection of articles based on the materials of the VIII international scientific and practical conference, 33–37 (2017). [Google Scholar]
  13. B.S. Rastorguev, A.I. Plotnikov, D.Z. Husnutdinov. Design of buildings and structures under emergency explosive effects: a tutorial 152, (2007). [Google Scholar]
  14. L. Figuli, D. Cekerevac, C. Bedon, B. Leitner. Numerical analysis of the blast wave propagation due to various explosive charges, Advances in Civil Engineering 2020(i), (2020). DOI: 10.1155/2020/8871412. [CrossRef] [Google Scholar]
  15. K. Singh, P. Gardoni, F. Stochino. Probabilistic models for blast parameters andfragility estimates of steel columns subject to blast loads, Engineering Structures 222 (April), 110944 (2020). DOI: 10.1016/j.engstruct.2020.110944. A. Ju. Sorokin. Universal approach to simulation of explosive loads on infrastructure objects of any type, Safety and labor protection, youth program within the framework of the International Exhibition, 170-173 (2019). [CrossRef] [Google Scholar]
  16. M.N. Kochepanova, V.D. Bosov. Experience in determining the explosive load using modern software systems and calculation methods, Modern technologies in construction. Theory and practice 1, 134–140 (2017). [Google Scholar]
  17. V.P. Avdot'in, A.V. Akin'shin, J.B. Andreev. Natural hazards of Russia: monograph in 6 volumes 248, (2002). [Google Scholar]
  18. A. Flora, D. Cardone, M. Vona, G. Perrone. A Simplified Approach for the Seismic Loss Assessment of RCBuildings at Urban Scale: The Case Study of Potenza (Italy), Buildings 11(4), 142 (2021). DOI: 10.3390/buildings1104014. [CrossRef] [Google Scholar]
  19. M.V. Ashirova, G.N. Ajdarova. Rapid response architecture: the concept of temporary mobile shelter in emergencies, Izvestia of Kazan State University of Architecture and Civil Engineering 2 (36), 17–22 (2016). [Google Scholar]
  20. D.V. Malysheva, A.O. Malyshev. Arrangement of well pad for oil field, Matrix of scientific knowledge 12-2, 349–353 (2020). [Google Scholar]
  21. T.G. Korotkova, K.S. Bozhenova. Statistics and causes of accidents at facilities oil and gas production, Scientific works of KubGTU 1, 115–127 (2019). [Google Scholar]
  22. OST 26.260.18-2004. Technological units for gas and oil industry. General specifications. [Google Scholar]
  23. V.S. Shirokov, I.S. Holopov, A.V. Solov'ev. Calculation of a modular building, assembled from block boxes, Tradition and innovation in construction and architecture. Construction: a collection of articles, 84–89 (2015). [Google Scholar]
  24. I.S. Holopov, V.S. Shirokov, A.V. Solov'ev, J.D. Makarov. Analysis of the stress-strain state of a pre-fabricated modular building, Industrial and civil construction 6, 15–19 (2015). [Google Scholar]
  25. V.S. Shirokov, A.V. Solov'ev, I.S. Holopov. Taking into account the pulsating wind load when calculating a production modular building, Tradition and innovation in construction and architecture, 18–21 (2016). [Google Scholar]
  26. V.V. Korolev, N.A. Klekovkina. Calculation of buildings and structures on the progressive collapse due to an emergency, Implementation of modern designs and advanced technologies in the track facilities 12 (12), 155–157 (2018). [Google Scholar]
  27. Manual for the survey and design of buildings and structures exposed to explosive loads, JSC «TsNIIPromzdaniy», (2020). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.