EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 274 (2021) E3S Web Conf., 274 (2021) 03013 References
Open Access
Issue
E3S Web Conf.
Volume 274, 2021
2nd International Scientific Conference on Socio-Technical Construction and Civil Engineering (STCCE – 2021)
Article Number 03013
Number of page(s) 6
Section Building Constructions, Buildings and Structures
DOI https://doi.org/10.1051/e3sconf/202127403013
Published online 18 June 2021
  1. A. G. Makukhin, G. V. Sirovoy, A. U. Ratushnyak, Pultrusion as a technological processfor manufacturing products from composite materials, Advanced engineering technologies and systems, 1, 99–106 (2016) [Google Scholar]
  2. V. A. Utkin, O. V. Solovey, Modern problems and directions of development of construction of bridges made of fiberglass materials, in Collection of scientific papers of the II International scientific and practical conference of students, postgraduates and young scientists, 397–403, Omsk, Russia (2018) [Google Scholar]
  3. S. B. Singh, Chawla Himanshu, An investigation of material characterization ofpultruded FRP H and I-beams, Mechanics of Advanced Materials and Structures, 25, 2, 124–142 (2018) DOI: 10.1080/15376494.2016.1250021 [CrossRef] [Google Scholar]
  4. F. Minghini, N. Tullini, F. Laudiero, Identification of the short-termfull-section moduli of pultruded FRP profiles using bending tests, Journal of Composites for Construction, 18, 1, 1–9 (2014) DOI: 10.1061/(ASCE)CC.1943-5614.0000391 [CrossRef] [Google Scholar]
  5. I. L. Kuznetsov, A. E. Fakhrutdinov, D. N. Aripov, Bolted joint in pultruded glass-reinforced plastic (GRP) profile framings, Izvestija KGASU, 4(46), 200–207 (2018) [Google Scholar]
  6. I. L. Kuznetsov, M. A. Salakhutdinov, A. E. Fakhrutdinov, D. N. Aripov, Development and experimental studies structures of the canopy over the stands from pultruded glass fiber reinforced profiles. News of higher educational institutions. Construction, 9, 96–108 (2019) DOI: 10.32683/0536-1052-2019-729-9-96-108 [Google Scholar]
  7. R. A. Kayumov, A. A. Sharafutdinov, On the assessment of durability of building structures made of fiberglass, Izvestija KGASU, 2(40), 114–123 (2017) [Google Scholar]
  8. A. E. Fakhrutdinov, D. N. Aripov, Framing structures from pultruded GRP profiles, in Dig. of articles of II All Russian scientific and technical conference «Polymer composite materials and new generation production technologies», Moscow, Russia, 281–294 (2017) [Google Scholar]
  9. I. L. Kuznetsov, A. E. Fakhrutdinov, D. N. Aripov, A study of bolted joints pultruded GRP profiles elements, in Dig. of art. of All Russian scientific and technical conference «Polymer composite materials of new generation. Transfer of innovations from aviation to priority sectors of the Russian economy», Ul’yanovsk, Russia, 6–15 (2018) [Google Scholar]
  10. Guidelines: Design and calculation of building structures made of pultruded FRP manufacturing LLC «Tatneft-Presscomposite». Central research Institute of building structures named after V. A. Kucherenko, 49, Moscow, Russia (2016) [Google Scholar]
  11. L. C. Bank. Flexural and shear moduli of full-section fiber reinforced plastic (FRP) pultruded beams. J. Test. Eval, 17, 1, 40–45 (1989) DOI: 10.1520/JTE11531J [CrossRef] [Google Scholar]
  12. A. S. Neto, H. L. Rovere, Flexural stiffness characterization of fiber reinforced plastic (FRP) pultruded beams, Compos. Struct., 81, 2, 274–282 (2007) DOI: 10.1016/j.compstruct.2006.08.016 [CrossRef] [Google Scholar]
  13. R. J. Brooks, G. J. Turvey, Lateral buckling of pultruded GRP I-section cantilevers, Compos. Struct., 32, 1-4, 203–215 (1995) [CrossRef] [Google Scholar]
  14. T. M. Roberts, H. Al-Ubaidi, Flexural and torsional properties of pultruded fiber reinforced plastic I-Profiles, J.Compos. Constr., 6, 1, 28–34 (2002) DOI: 10.1061/(ASCE)1090-0268(2002)6:1(28) [CrossRef] [Google Scholar]
  15. I. L. Howard, Practical approaches for evaluating bending and torsion of fiber-reinforced polymer components using instrumented testing, J. Appl. Sci. Eng. Tech., 2, 1, 24–30 (2008) [Google Scholar]
  16. F. Minghini, N. Tullini and F. Lauderio, Full section properties of pultruded FRP profiles using bending tests, in Proceedings of the 6th Int. Conference on FRP Composites in Civil Engineering, 1–8, Rome (2012) [Google Scholar]
  17. M. M. Correia, Structural behavior of pultruded GFRP profiles experimental study and numerical modeling, Inst. Superior Tech, 1, 1–14 (2012) DOI: 10.1016/j.tws.2016.05.004 [Google Scholar]
  18. J. R. Correia, F. A. Branco, N. M. F. Silva, D. Camotim, N. Silvestre, First-order, buckling and post-buckling behavior of GFRP pultruded beams. Part 1: Experimental study, Comput. Struct., 89, 21–22, 2052–2064 (2011) [CrossRef] [Google Scholar]
  19. B. A. K. Maji, R. Acree, D. Satpathi, K. Donelly, Evaluation of pultruded FRP composites for structural applications, J. Mat. Civil. Eng, 9, 3, 154–158 (1997) DOI: 10.1061/(asce)0899-1561(1997)9:3(154) [CrossRef] [Google Scholar]
  20. P. Feraboli, K. T. Kedward, Four-point bend interlaminar shear testing of uni- and multidirectional carbon/epoxy composite systems, Compos. A, 34, 12, 1265–1271 (2003) DOI: 10.1016/S1359-835X(03)00204-5 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.