Open Access
Issue |
E3S Web Conf.
Volume 274, 2021
2nd International Scientific Conference on Socio-Technical Construction and Civil Engineering (STCCE – 2021)
|
|
---|---|---|
Article Number | 03014 | |
Number of page(s) | 8 | |
Section | Building Constructions, Buildings and Structures | |
DOI | https://doi.org/10.1051/e3sconf/202127403014 | |
Published online | 18 June 2021 |
- L. Luttrell, J. Mattingly, W. Schultz. Sputo Diaphragm Design Manual, Steel Deck Institute 4th Ed. T., 405 (2015). [Google Scholar]
- Reda Farag. Reliability assessment of wall-frame structures, Ain Shams Engineering Journal 6 Iss. 3, 725–733 (2015). DOI: 10.1016/j.asej.2015.01.001. [CrossRef] [Google Scholar]
- S. Pala, G. Özmen. Lateral load analysis of multi-storey structures considering axial deformations, Computers & Structures 34 Iss. 4, 577–583 (1990). DOI: 10.1016/0045-7949(90)90235-T. [CrossRef] [Google Scholar]
- F.S. Zamaliev. To the calculation of steelreinforced concrete floors with profiled steel flooring, Izvestiya KGASU 3 (37), 129–134 (2016). [Google Scholar]
- E.L. Ayrumyan, N.I. Kamenshchikov, I.A. Rumyantseva. Osobennosti rascheta monolitnykh plit stalezhelezobetonnykh pokrytiy po profilirovannomu stal'nomu nastilu. Promyshlennoye i grazhdanskoye stroitel'stvo 9, 21–26 (2015). [Google Scholar]
- F.S. Zamaliev. K raschetu ankernykh svyazey stalezhelezobetonnykh konstruktsiy Izvestiya KGASU 3 (49), 87–94 (2019). [Google Scholar]
- R.P. Jonson. Designer’s guide to Eurocode 4: Design of composite steel and concrete structures EN 1994-1-1 (transl. from engl.). Moscow, MGSU, 412 (2013). [Google Scholar]
- V.O. Almazov, S.N. Harutyunyan. Design of Composite Reinforced Concrete Slabs according to Eurocode 4 and Russian Recommendations, Vestnik MGSU 8, 51–65 (2015). DOI: 10.22227/1997-0935.2015.8.51-65. [CrossRef] [Google Scholar]
- Linur Gimranov, Alsou Fattakhova. Shear stops forces distribution analysis in combined floors of multi-storey buildings, IOP Conf. Ser.: Mater. Sci. Eng. 890, 012080 (2020). DOI: 10.1088/1757-899X/890/1/012080. [CrossRef] [Google Scholar]
- A.I. Fattakhova. Impact of horizontal loads on the work of stud bolts in combined floor slabs, Vestnik MGSU 15 (1), 31–42 (2020). DOI: 10.22227/1997-0935.2020.1.31-42. [CrossRef] [Google Scholar]
- A.I. Fattakhova. Multi-storey buildings combinedfloors with different aspect ratios shear stops forces distribution analysis, Izvestiya vuzov. Stroitel'stvo 1, (2020). DOI: 10.32683/0536-1052-2020-733-1-46-56. [Google Scholar]
- T. Bart Quimby, P.E., Ph.D., F. Asce. A Beginner’s Guide to the Steel Construction Manual An introduction to designing steel structures using the AISC Steel Construction Manual, 15th edition. Alaska, 53 (2017). [Google Scholar]
- Dung-Myau Lue, Cheng-Yen Liao, Chien-Chien Chang, Wei-Ting Hsu. Improved analysis of bolted shear connection under eccentric loads, Journal of Marine Science and Technology 25 4, 373–382 (2017). DOI: 10.6119/JMST-017-0223-1. [Google Scholar]
- Tom Molkens, Jelena Dobric, Barbara Rossi. Shear resistance of headed shear studs welded on welded plates in composite floors. DOI: 10.1016/j.engstruct.2019.109412. [Google Scholar]
- Y. Ling, Z. Zheng, T.Y. Yang, H. Ma. Behaviour and modeling of the bearing capacity of shear stud connectors, International Journal of Steel Structures 19 2, 650–659 (2019). DOI: 10.1007/s13296-018-0154-3. [CrossRef] [Google Scholar]
- H.B. Shim, J.H. Lee. Shear force of headed shear studs, high-strength shear studs and steel plate embedded in concrete: an experimental study, Material Research Innovations 19 (S8), S8-145–S8-148. DOI: 10.1179/1432891715Z.0000000001645. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.