EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 280 (2021) E3S Web Conf., 280 (2021) 05003 References
Open Access
Issue
E3S Web Conf.
Volume 280, 2021
Second International Conference on Sustainable Futures: Environmental, Technological, Social and Economic Matters (ICSF 2021)
Article Number 05003
Number of page(s) 6
Section Sustainable Energy
DOI https://doi.org/10.1051/e3sconf/202128005003
Published online 30 June 2021
  1. A. Boglietti, A. Cavagnino, M. Lazzari and A. Pastorelli, A simplified thermal model for variable speed self cooled industrial induction motor, in 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting, Pittsburgh, PA, USA, 2002, vol. 2, pp. 723–730. doi:10.1109/IAS.2002.1042640. [CrossRef] [Google Scholar]
  2. O.I. Okoro, B. Weidemann, O. Ojo, An efficient thermal model for induction machines, in Industry Applications Conference 2004. 39th IAS Annual Meeting, 2004, vol. 4, pp. 2477–2484. [Google Scholar]
  3. Kuznetsov, V., Nikolenko, A. Models of operating asynchronous engines at poor-quality electricity. Eastern-European Journal of Enterprise Technologies 1(8), 37–42 (2015) [CrossRef] [Google Scholar]
  4. V. Kuznetsov, M. Tryputen, Y. Kuznetsova, M. Babyak, V. Artemchuk, M. Kovzel, Ways to Improve Power Quality under the Conditions of Industrial Enterprises, in 2020 IEEE Problems of Automated Electrodrive. Theory and Practice (PAEP), Kremenchuk, Ukraine, 2020, pp. 1–6, doi:10.1109/PAEP49887.2020.9240801. [Google Scholar]
  5. I. Lutsenko et al., Development of a method for structural optimization of a neural network based on the criterion of resource utilization efficiency. Eastern-European Journal of Enterprise Technologies 2(4(98)) (2019). doi:10.15587/1729-4061.2019.164591 [Google Scholar]
  6. O. Mykhailenko, Ore crushing process dynamics modeling using the Laguerre model. Eastern-European Journal of Enterprise Technologies 4(4(76)) (2015). doi:10.15587/1729-4061.2015.47318 [Google Scholar]
  7. M. Tryputen, V. Kuznetsov, A. Kuznetsova, M. Tryputen, Y. Kuznetsova, T. Serdiuk, “Improving the Reliability of Simulating the Operation of an Induction Motor in Solving the Technical and Economic Problem”, in: Hu Z., Petoukhov S., Dychka I., He M. (eds) Advances in Computer Science for Engineering and Education III. ICCSEEA 2020. Advances in Intelligent Systems and Computing, vol 1247. (Springer, Cham, 2021). doi:10.1007/978-3-030-55506-1_13 [Google Scholar]
  8. O. Mykhailenko, Research of adaptive algorithms of Laguerre model parametrical identification at approximation of ore breaking process dynamics. Metallurgical and Mining Industry 6, 109–117 (2015) [Google Scholar]
  9. A. Uskov, V. Shchokin, O. Mykhailenko, O. Kryvenko, The fuzzy logic controllers synthesis method in the vector control system of the wind turbine doubly-fed induction generator. E3S Web of Conferences 166, 04006 (2020). doi:10.1051/e3sconf/202016604006. [CrossRef] [EDP Sciences] [PubMed] [Google Scholar]
  10. DSTU EN 50160:2014. Characteristics of electric energy supply voltage in general-purpose electric networks (2014) [Google Scholar]
  11. GOST 13109-97. Normy kachestva jelektricheskoj jenergii v sistemah jelektrosnabzhenija obshhego naznachenija. IPK (Izdatel’stvo standartov, Moscow, 1998) [Google Scholar]
  12. O.V. Kyrylenko, Modeling of energy processes in energy supply systems in solving energy saving problems. Pratsi Instytutu elektrodynamiky NAN Ukrainy, Elektrodynamika, 87–91 (2001) [Google Scholar]
  13. Y.V. Zhezhelenko, Electricity quality indicators and their control at industrial enterprises (Energoatomizdat, Moskva, 2000) [Google Scholar]
  14. C. Mastorocostas, I. Kioskeridis, N. Margaris, Thermal and slip effects on rotor time constant in vector controlled induction motor drives. IEEE Transactions on Power Electronics 21(2), 495–504 (2006). doi:10.1109/TPEL.2005.869765 [CrossRef] [Google Scholar]
  15. J. P. Bastos, M. F. R. R. Cabreira, N. Sadowski, S. R. Arruda, S. L. Nau, A thermal analysis of induction motors using a weak coupled modeling. IEEE Transactions on Magnetics 33(2), 1714–1717 (1997). doi:10.1109/20.582603 [CrossRef] [Google Scholar]
  16. D. G. Nair, T. Jokinen, A. Arkkio, Coupled analytical and 3D numerical thermal analysis of a TEFC induction motor, in 2015 18th International Conference on Electrical Machines and Systems (ICEMS), Pattaya, 2015, pp. 103–108. doi:10.1109/ICEMS.2015.7385008. [CrossRef] [Google Scholar]
  17. P. Chystiakov, O. Chornyi, B. Zhautikov, G. Sivyakova, Remote control of electromechanical systems based on computer simulators, in 2017 International Conference on Modern Electrical and Energy Systems (MEES), Kremenchuk, 2017, pp. 364–367. doi:10.1109/MEES.2017.8248934 [CrossRef] [Google Scholar]
  18. A. Tuys, F. Meyer, M. Steichen, C. Zwyssig, J.W. Kolar, Advanced Cooling Methods for High-Speed Electrical Machines. IEEE Transactions on Industry Applications 53(3), 2077–2087 (2017) [CrossRef] [Google Scholar]
  19. M. Schrittwieser, A. Marn, E. Farnleitner, G. Kastner, Numerical analysis of heat transfer and flow of stator duct models. IEEE Trans. Ind. Appl. 50(1), 226–233 (2014) [CrossRef] [Google Scholar]
  20. S. E. Zocholl, E. O. Schweitzer, A. Aliaga-Zegarra, Thermal Protection of Induction Motors Enhanced by Interactive Electrical and Thermal Models. IEEE Transactions on Power Apparatus and Systems PAS- 103(7), 1749–1755 (1984). doi:10.1109/TPAS.1984.318678. [CrossRef] [Google Scholar]
  21. M. Kotsur, I. Kotsur, Y. Bezverkhnia, D. Andrienko, Increasing of thermal reliability of a regulated induction motor in non-standard cycle time conditions, in 2017 International Conference on Modern Electrical and Energy Systems (MEES), Kremenchuk, 2017, pp. 88–91, doi:10.1109/MEES.2017.8248960. [CrossRef] [Google Scholar]
  22. A. Boglietti, A. Cavagnino, D. Staton, Determination of critical parameters in electrical machine thermal models. IEEE Trans. Ind. Appl. 44(4), 1150–1159 (2008) [CrossRef] [Google Scholar]
  23. A.N. Eliasen, The Protection of High-Inertia Drive Motors During Abnormal Starting Conditions. IEEE Transactions PAS-99 (4) (1980) [Google Scholar]
  24. A. Boglietti, A. Cavagnino, D. Staton, M. Shanel, M. Mueller, C. Mejuto, Evolution and modern approaches for thermal analysis of electrical machines. IEEE Trans. Ind. Electron. 56(3), 871–882 (2009) [CrossRef] [Google Scholar]
  25. M. Zagirnyak, D. Mamchur, A. Kalinov, An algorithm for induction motor monitoring system based on electrical signals analysis. Przeglad Elektrotechniczny 94(6), 15–18 (2018) [Google Scholar]
  26. A. Kluczek, P. Olszewski, Energy audits in industrial processes. Journal of Cleaner Production 142(4), 3437–3453 (2017) [CrossRef] [Google Scholar]
  27. Y. Adler, Planning an experiment in finding optimal conditions (Nauka, Moscow, 1976) [Google Scholar]
  28. B. Ivobotenko, I. Iliinskyi, I. Kopylov, Experiment planning in electromechanics (Energiya, Moscow, 1975) [Google Scholar]
  29. G. Korn, Mathematics Handbook for Scientists and Engineers: Definitions, Theorems, Formulas (Book on Demand, Moscow, 2014) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.