EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 280 (2021) E3S Web Conf., 280 (2021) 05010 References
Open Access
Issue
E3S Web Conf.
Volume 280, 2021
Second International Conference on Sustainable Futures: Environmental, Technological, Social and Economic Matters (ICSF 2021)
Article Number 05010
Number of page(s) 6
Section Sustainable Energy
DOI https://doi.org/10.1051/e3sconf/202128005010
Published online 30 June 2021
  1. P.M. Tikhodeev, Light measurements in lighting engineering (ONTI, Moscow, 1936) [Google Scholar]
  2. J. Bast, S.M. Gorbatyuk, I.Yu. Kryukov, Horizontal hcc-12000 unit for the continuous casting of semifinished products. Metallurgist 55(1-2), 116–118 (2011). doi:10.1007/s11015-011-9399-1 [CrossRef] [Google Scholar]
  3. M.G. Naumova, I.G. Morozova, P.V. Borisov, Study of metal surface with color image obtained with laser marking. Solid State Phenomena 299 SSP, 943–948 (2020). doi:10.4028/www.scientific.net/SSP.299.943 [CrossRef] [Google Scholar]
  4. A. Danilov, D. Borzov, Energy Performance Analysis of LEDs for Fiber Optic Converters. Actual problems of radio electronics 9, 40–44 (2004) [Google Scholar]
  5. A. Shapoval et al Profitability of production of stainless steel + zirconium metals combination adapters. Key Engineering Materials 864, 285–291 (2020). doi:10.4028/www.scientific.net/KEM.864.285 [CrossRef] [Google Scholar]
  6. O.A. Kobelev, S.V. Albul, N.L. Kirillova, Research and development of broaching methods on mandrel of large-sized pipe forgings. IOP Conference Series: Materials Science and Engineering 709(4), 044104 (2020). doi:10.1088/1757-899X/709/4/044104 [CrossRef] [Google Scholar]
  7. I.V. Khovrak, M.V. Petchenko, Estimating the level of financial safety in banking institutions. Actual Problems of Economics 164 (2), 347–354 (2015) [Google Scholar]
  8. O.E. Markov et al, Improvement of Upsetting Process of Four-Beam Workpieces Based on Computerized and Physical Modeling. FME Transactions 48(4), 946–953 (2020). doi:10.5937/fme2004946M [Google Scholar]
  9. N. Hrudkina et al, Predicting the shape formation of hollow parts with a flange in the process of combined radial-reverse extrusion. Eastern-European Journal of Enterprise Technologies 4 (1-106), 55–62 (2020). doi:10.15587/1729-4061.2020.203988 [Google Scholar]
  10. T. Antonova, E. Gutzait, L. Kochan, A. Krasnopolskii, D. Miliutin, Calculations of illumination of workplaces by LEDs, in Reports of the 60th scientific session dedicated to Radio Day. Optoelectronics and fiber optic devices, pp. 39–41 (2005) [Google Scholar]
  11. A.Yu. Zarapin, A.I. Shur, N.A. Chichenev, Improvement of the unit for rolling aluminum strip clad with corrosion-resistant steel. Steel in Translation 29(10), 69–71 (1999) [Google Scholar]
  12. A. Keropyan, S. Albul, A. Zarapin, Problem of Increasing Tractive Effort of Railway Locomotives in Conditions of Arctic and Continental Shelf Regions. Lecture Notes in Mechanical Engineering, pp. 651–658 (2020). doi:10.1007/978-3-030-22063-1_69 [Google Scholar]
  13. E.M. Gutzait, Investigation of normal and anomalous characteristics of the coefficients of deviation from the law of the inverse square of the distance when using LED modules. Radio Engineering and Electronics 54(12), 1495–1512 (2009) [Google Scholar]
  14. E.M. Gutzait, Investigation of illumination by LED modules located at big distances from the lighted objects. Radio Engineering and Electronics 1, 113–124 (2009) [Google Scholar]
  15. V. Artiukh, V. Mazur, A. Adamtsevich, Priority influence of horizontal forces at rolling on operation of main sheet rolling equipment. MATEC Web of Conferences 106, 04001 (2017). doi:10.1051/matecconf/201710604001 [CrossRef] [EDP Sciences] [Google Scholar]
  16. Y. Shmelov, S. Vladov, Y. Klimova, M. Kirukhina, Expert system for identification of the technical state of the aircraft engine TV3-117 in flight modes, in 1st IEEE International Conference on System Analysis and Intelligent Computing, SAIC 2018, 8516864. doi:10.1109/SAIC.2018.8516864 [Google Scholar]
  17. A. Shapoval et al, Technology of Production of Refractory Composites for Plasma Technologies, in Proceedings of the 25th IEEE International Conference on Problems of Automated Electric Drive. Theory and Practice PAEP 2020, 9240830. doi:10.1109/PAEP49887.2020.9240830 [Google Scholar]
  18. E.M. Gutzait, W.E. Maslov, T.A. Agafonova, Results of calculations of illuminances from LED modules and research of anomalous characteristics of coefficients of deviation from the law of a square of distance, in 7th Belarusian-Russian seminar Semiconductor lasers and systems based on them, pp. 137–140 (2009) [Google Scholar]
  19. E.M. Gutzait, V.E. Maslov, Analysis of the distribution of illumination in the near area from two-dimensional models with rotated LEDs. Semiconductor lighting 3 (2012) [Google Scholar]
  20. T. Shmelova, Y. Shmelov, S. Vladov, Concept of Building Intelligent Control Systems for Aircraft, Unmanned Aerial Vehicles and Aircraft Engines, in 6th International Conference on Methods and Systems of Navigation and Motion Control, MSNMC 2020, 9255509 (2020). doi:10.1109/MSNMC50359.2020.9255509 [Google Scholar]
  21. I. Savchenko, A. Shapoval, A. Gurenko, Modeling Dynamic Parameters of Hard Alloys during Shock Wave Regeneration. IOP Conference Series: Materials Science and Engineering 969(1), 012079 (2020). doi:10.1088/1757-899X/969/1/012079 [Google Scholar]
  22. V.V. Kondratenko et al, Static analysis and strength calculation of drive shaft of large-scale cone crusher. E3S Web of Conferences 193, 01038 (2020). doi:10.1051/e3sconf/202019301038 [EDP Sciences] [Google Scholar]
  23. O. E. Markov et al, Computerized simulation of shortened ingots with a controlled crystallization for manufacturing of high-quality forgings. International Journal of Advanced Manufacturing Technology 103(5-8), 3057–3065 (2019). doi:10.1007/s00170-019-03749-4 [Google Scholar]
  24. S.N. Larin, V.I. Platonov, K.N. Solomonov, Approach to assessment of microdamages accumulated during the constrained molding of shells made of the material subject to energy theory of creep and damage. Journal of Chemical Technology and Metallurgy 52 (4), 679–684 (2017) [Google Scholar]
  25. I.V. Petrunenko, S.I. Belei, M.V. Petchenko, N.V. Kovalenko, O.A. Bodnar, N.G. Maslak, Organizational and financial principles for the development of euroregions. International Journal of Economics and Business Administration 8(3), 150–160 (2020). doi:10.35808/ijeba/493 [Google Scholar]
  26. O. Markov et al, Development of the metal rheology model of high-temperature deformation for modeling by finite element method. EUREKA, Physics and Engineering 2019 (2), 52–60 (2019) [Google Scholar]
  27. E.V. Sobolev, E.N. Poddenezhnykh, Modeling of lighting characteristics of LED modules (2011) [Google Scholar]
  28. M. Zagirnyak, V. Zagirnyak, D. Moloshtan, A search for technologies implementing a high fighting efficiency of the multilayered elements of military equipment. Eastern-European Journal of Enterprise Technologies 6 (1-102), 33–40 (2019) [Google Scholar]
  29. A.A. Titova, Experimental and numerical calculation of LED patterns. SWORLD 7(4), 10–16 (2012) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.