Open Access
Issue |
E3S Web Conf.
Volume 280, 2021
Second International Conference on Sustainable Futures: Environmental, Technological, Social and Economic Matters (ICSF 2021)
|
|
---|---|---|
Article Number | 07018 | |
Number of page(s) | 6 | |
Section | Sustainable Materials and Technologies | |
DOI | https://doi.org/10.1051/e3sconf/202128007018 | |
Published online | 30 June 2021 |
- T. Haikova, R. Puzyr, D. Savelov, V. Dragobetsky, R. Argat, R. Sivak, The Research of the Morphology and Mechanical Characteristics of Electric Bimetallic Contacts. In: Chenchevoy, V. et al. (eds.) CONFERENCE 2020, PAEP, IEEE, Kremenchuk, Ukraine, 579 (2020). doi:10.1109/PAEP49887.2020.9240847 [Google Scholar]
- T.V. Haikova, R.H. Puzyr, R.V. Levchenko, Experimental Studies on the Stress-Strain State under Drawing Aluminum–Copper Bimetal Parts Rectangular in Plan. Russian Journal of Non-Ferrous Metals, 61(4), 404 (2020). doi:10.3103/S1067821220040033 [Google Scholar]
- V.V. Drahobetskyi, N.N. Moroz, O.V. Trotsko, Optimization of geometric and technological parameters of the process of forming sheet parts with a rational choice of intensifying factors. Bulletin of Nat. Tech. Univ. KhPI, Ukraine, 32, 38 (2009) [Google Scholar]
- M.M. Moroz, The general approach to optimization of technology of forming of metal sheet building materials. Municipal utilities. Scientific and technical collection. Series: technical sciences, Ukraine, 88, 59 (2009) [Google Scholar]
- M.M. Moroz, V.V. Drahobetskyi, Logistic approach to the optimization of explosive stamping processes. Resource-saving technologies of production and pressure treatment of materials in mechanical engineering, Ukraine, 346 (2009) [Google Scholar]
- M.M. Moroz, V.V. Drahobetskyi, Determination of the optimal difference in the lengths of the steps of multistage punches. Forging and stamping production. Metal processing by pressure, Ukraine, 5, 31 (2010) [Google Scholar]
- M.M. Moroz, Optimization of deformation of sheet parts of a cabin of the KrAZ truck. Nauka i inowacja – 2011. Materialy VII Miedzynarodowej naukowipraktycznej konferencji, Przemysl, Poland, 16, 75 (2011) [Google Scholar]
- M.M. Moroz, Optimization of the process of deformation of layered workpieces during blasting stamping. Actual problems of society. All-Ukrainian scientific and technical conference of young scientists and specialists, Kremenchuk, Ukraine, 115 (2010) [Google Scholar]
- M.V. Zagirnyak, A.A. Shapoval, E.A. Naumova, A.V. Lytvynenko, V.V. Drahobetskyi, V.M. Buhaichuk, A.I. Kulyk, N.V. Vysokolian, H.I. Lehotkin, Application of morphological analysis in the development of optimal technology for obtaining tapes from refractory materials. Bulletin of Mykhailo Ostrohradskyi KrNU, Ukraine, 6/2013(83), 64 (2013) [Google Scholar]
- I.A. Miklashevich Micromechanics of destruction in generalized spaces (Minsk, Logvinov, 2003) [Google Scholar]
- M.M. Moroz, B.P. Sereda, T.A. Vasylchenko, A.V. Hlebenko, V.A. Vydmych, Optimization of the load of the motor of the planetary drive of press-forging machines. Bulletin of Mykhailo Ostrohradskyi KrNU, Ukraine, 2/2011(67), 73 (2011) [Google Scholar]
- M.M. Moroz, Optimization of the process of forming of body sheet metal parts of the cab of modifications of KrAZ vehicles. Bulletin of Mykhailo Ostrohradskyi KrNU, Ukraine, 4/2011(69), 97 (2011) [Google Scholar]
- M.M. Moroz, V.V. Drahobetskyi, A.H. Markevych, General approaches to optimizing the technology of production of sheet blanks. Bulletin of Dnipropetrovsk Academician V. Lazar National Railway Transport University, Ukraine, 28, 186, (2009) [Google Scholar]
- Y. Salenko, R. Puzyr, O. Shevchenko, V. Kulynych, O. Pedun, Numerical Simulation of Local Plastic Deformations of a Cylindrical Workpiece of a Steel Wheel Rim. In: Ivanov V. et al. (eds) Advances in Design, Simulation and Manufacturing III. DSMIE 2020. Lecture Notes in Mechanical Engineering. Springer, Cham, 1, 442 (2020). doi:10.1007/978-3-030-50794-7_43 [Google Scholar]
- I.K. Savchenko, O.P. Chervinko, Ye. Turyk, I.A. Ryabtsev, Investigation of the thermomechanical state of cylindrical parts deposited with layers of austenitic and martensitic steels. Welding production, 8, 6 (2007) [Google Scholar]
- D. Moloshtan, E. Naumova, I. Kuzev, V. Dragobetskii, S. Bogdanov, A life cycle of vehicle facing parts during production and operation. All-Ukrainian scientific and technical conference «Modern trends in the development of mechanical engineering and transport», Ukraine, 19 (2020) [Google Scholar]
- V.V. Lotous, Assessment of the effectiveness of combined explosive hardening technologies. Bulletin of Mykhailo Ostrohradskyi KrNU, Ukraine, 4/2013(81), 144 (2013) [Google Scholar]
- O. Kurpe, V. Kukhar, R. Puzyr, V. Burko, E. Balalayeva, E. Klimov, Electric Motors Power Modes at Synchronization of Roughing Rolling Stands of Hot Strip Mill. In: Chenchevoy, V. et al. (eds.) CONFERENCE 2020, PAEP, IEEE, Kremenchuk, Ukraine, 510 (2020). doi:10.1109/PAEP49887.2020.9240818 [Google Scholar]
- V.V. Lotous, M.V. Zagirnyak, V.V. Drahobetskyi, Optimization of the parameters of plastic deformation during the hardening of mining equipment parts. Modern resource-and-energysaving technologies of mining production: science and research journal, KrNU, Ukraine, 2/2013(12), 97 (2013) [Google Scholar]
- V.I. Makhnenko Safety resource for the operation of welded joints and assemblies of modern structures (Kyiv, Scientific opinion, 2006) [Google Scholar]
- I. K. Senchekov, I. A. Ryabtsev, Ye. Turyk, Block diagram of the procedure for calculating the stress-strain state of parts in the process of surfacing and subsequent operation. Automatic welding, Ukraine, 5-6, 138 (2015) [Google Scholar]
- V.V. Dragobetsky, A.A. Shapoval, D.V. Mospan, V.V. Lotous, Hardening of excavator bucket teeth using explosion plastic deformation. Metallurgical and mining industry, Ukraine, 2, 38 (2015) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.