Open Access
Issue |
E3S Web Conf.
Volume 280, 2021
Second International Conference on Sustainable Futures: Environmental, Technological, Social and Economic Matters (ICSF 2021)
|
|
---|---|---|
Article Number | 07019 | |
Number of page(s) | 6 | |
Section | Sustainable Materials and Technologies | |
DOI | https://doi.org/10.1051/e3sconf/202128007019 | |
Published online | 30 June 2021 |
- L.M. Gurevich, V.M. Volchkov, Yu.P. Trykov, O.S. Kiselev, Modeling the process of deep drawing of tubular adapters made of titanium-aluminum laminated plates. Transactions of universities. Nonferrous metallurgy, 4, 30 (2014) [Google Scholar]
- T. Haikova, R. Puzyr, V. Dragobetsky, A. Symonova, R. Vakylenko, Finite-Element Model of Bimetal Billet Strain Obtaining Box-Shaped Parts by Means of Drawing. In: Ivanov V. et al. (eds) Advances in Design, Simulation and Manufacturing II, Proceedings of the 2nd International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2019, 85 (2019). doi:10.1007/978-3-030-22365-6_9 [Google Scholar]
- J.C. Luo, Study on Stamping-Forging Process and Experiment of Sheet Metal Parts with Non-uniform Thickness. Wuhan: Huazhong University of Science & Technology, 51, 49 (2011) [Google Scholar]
- M.A. Hassan, K.I.E. Ahmed, N. Takakura, A developed process for deep drawing of metal foil square cups. Journal of Materials Processing Technology, 212(1), 295 (2012). doi:10.1016/j.jmatprotec.2011.09.015 [Google Scholar]
- X.Y. Wang, K. Ouyang, J.C. Xia, FEM analysis of drawing-thickening technology in stamping-forging hybrid process. Forging & Stamping Technology, 34(4), 73 (2009) [Google Scholar]
- M. Gavas, M. Izciler, Effect of blank holder gap on deep drawing of square cups. Materials and Design, 28, 1641 (2007). doi:10.1016/j.matdes.2006.03.024 [Google Scholar]
- O.V. Kalyuzhnyi, V.L. Kalyuzhnyi, Intensification of forming processes of cold sheet stamping (Kyiv, Sik Group Ukraine LLC, Ukraine, 2015) [Google Scholar]
- G.X. Yan, X.Y. Wang, L. Deng, A study of hole flanging-upsetting process. Advanced Materials Research, 939, 291 (2014). doi:10.4028/www.scientific.net/AMR.939.291 [Google Scholar]
- J.C. Luo, Study on Stamping-Forging Process and Experiment of Sheet Metal Parts with Non-uniform Thickness. Wuhan: Huazhong University of Science & Technology, 51, 49 (2011) [Google Scholar]
- R. Puzyr, D. Savelov, R. Argat, A. Chernish, Distribution analysis of stresses across the stretching edge of die body and bending radius of deforming roll during profiling and drawing of cylindrical workpiece. Metallurgical and Mining Industry, Ukraine, 1, 27 (2015) [Google Scholar]
- E.A. Popov, Fundamentals of the theory of sheet punching (Moscow, engineering, 1977) [Google Scholar]
- A. Maslov, J. Batsaikhan, R. Puzyr, Y. Salenko, The determination of the parameters of a vibration machine the internal compaction of concrete mixtures. International Journal of Engineering & Technology, 7(4), 12 (2018). doi:10.14419/ijet.v7i4.3.19545 [Google Scholar]
- Y. Salenko, R. Puzyr, O. Shevchenko, V. Kulynych, O. Pedun, Numerical Simulation of Local Plastic Deformations of a Cylindrical Workpiece of a Steel Wheel Rim. In: Ivanov V. et al. (eds) Advances in Design, Simulation and Manufacturing III, Lecture Notes in Mechanical Engineering, DSMIE 2020, 442 (2020). doi:10.1007/978-3-030-50794-7_43 [Google Scholar]
- A. Khosravifard, R. Ebrahimi, Investigation of parameters affecting interface strength in Al/Cu clad bimetal rod extrusion process. Materials and Design, 31, 493 (2010) [Google Scholar]
- S. Kapifiski, Analytical and experimental analysis of deep drawing process for bimetal elements. Journal of Materials Processing Technology, 60, 197 (1996) [Google Scholar]
- V.P. Romanovskii, Reference book on cold forging (Leningrad, engineering, 1976) [Google Scholar]
- S.A.A. Akbari-Mousavi, L.M. Barrett, S.T.S. Al-Hassani, Explosive welding of metal plates. Journal of Materials Processing Technology, 202(1-3), 224 (2008) [Google Scholar]
- M.V. Zagirnyak, V.V. Drahobetskyi, New methods of obtaining materials and structures for light armor protection. Military Technologies (ICMT), International Conference, Brno, Czech Republic, 1, 705 (2015) [Google Scholar]
- V. Dragobetsky, V. Zagoryansky, A. Voronin, Process modeling of elastic-plastic deformation of steel-aluminum compositions produced by impact bonding. Metallurgical & Mining Industry, 7(9), 1186 (2015) [Google Scholar]
- D.I. Adeyemi, A. Bolaji, O.A. Mosobalaje, J.O. Oluyemi, D.S. Moshood, Effect of Heat Treatment on Some Mechanical Properties of 7075 Aluminium Alloy. Materials Research, 16(1), 190 (2013). doi:10.1590/S1516-14392012005000167 [Google Scholar]
- W.H.A. Shwe, T.L. Kay, K.K.O. Waing Waing, The effect of ageing treatment of aluminum alloys for fuselage structure-light aircraft. World Academy of Science, Engineering and Technology, 46, 696 (2008) [Google Scholar]
- T. Mohammad, E. Esmaeil, Mechanical and anisotropic behaviors of 7075 aluminum alloy sheets. Materials and Design, 32(2), 1594 (2010). doi:10.1016/j.matdes.2010.09.001 [Google Scholar]
- J.F. Li, Z.W. Peng, C.X. Li, Z.Q. Jia, W.J. Chen, Z.Q. Zheng, Mechanical properties, corrosion behaviors and microstructures of 7075 aluminium alloy with various aging treatments. Transactions of Nonferrous Metal Society of China, 18(4), 755 (2008). doi:10.1016/S1003-6326(08)60130-2 [Google Scholar]
- B.F. Roberto, G.L. Terence, Using severe plastic deformation for the processing of advanced engineering materials. Materials Transactions, 50(7), 1613 (2009). doi:10.2320/matertrans.MF200913 [Google Scholar]
- S. Miyazaki, S. Kumai, A. Sato, Plastic deformation of Al–Cu–Fe quasicrystals embedded in Al2Cu at low temperatures. Mater Sci Eng A, 300-5, 400 (2005). doi:10.1016/j.msea.2005.03.063 [Google Scholar]
- C.-Y. Chen, W.-S. Hwang, Effect of Annealing on the Interfacial Structure of Aluminum-Copper Joints. Materials Transactions, 48(7), 1938 (2007). doi:10.2320/matertrans.MER2006371 [Google Scholar]
- H. Mirzakouchakshirazi, A.R. Eivani, Sh. Kheirandish, Effect of Post-Deformation Annealing Treatment on Interface Properties and Shear Bond Strength of Al-Cu Bimetallic Rods Produced by Equal Channel Angular Pressing. Iranian Journal of Materials Science & Engineering, 14(4), 25 (2017). doi:10.22068/ijmse.14.4.25 [Google Scholar]
- R. Puzyr, D. Savelov, V. Shchetynin, R. Levchenko, T. Haikova, S. Kravchenko, S. Yasko, R. Argat, Y. Sira, Y. Shchipkovakyi, Development of a method to determine deformations in the manufacture of a vehicle wheel rim. Eastern-European Journal of Enterprise Technologies, 4,1(94), 55 (2018). doi:10.15587/1729-4061.2018.139534 [Google Scholar]
- R. Puzyr, T. Haikova, O. Trotsko, R. Argat, Determining experimentally the stress-strained state in the radial rotary method of obtaining wheels rims. Eastern-European Journal of Enterprise Technologies, 4, 1(82), 52 (2016). doi:10.15587/1729-4061.2016.76225 [Google Scholar]
- A.V. Grushko, V.V. Kukhar, Y.O. Slobodyanyuk, Phenomenological Model of Low-Carbon Steels Hardening during Multistage Drawing. Solid State Phenomena, 265, 114 (2017). doi:10.4028/www.scientific.net/SSP.265.114 [Google Scholar]
- I. Hugo, P.J. Medellín-Castillo, D.F. García-Zugasti, F.J. de Lange, A. Colorado, Analysis of the allowable deep drawing height of rectangular steel parts. The International Journal of Advanced Manufacturing Technology, 66(1-4), 371 (2013). doi:10.1007/s00170-012-4331-9 [Google Scholar]
- W. Leyu, E. Daxin, Numerical simulation analysis of variable BHF drawing of rectangular cup on curve blank-holder. Mod Manuf Eng, 2, 73 (2006) [Google Scholar]
- V.A. Ogorodnikov, I.A. Derevenko, R.I. Sivak, On the Influence of Curvature of the Trajectories of Deformation of a Volume of the Material by Pressing on Its Plasticity Under the Conditions of Complex Loading. Materials Science, 54(3), 326 (2018). doi:10.1007/s11003-018-0188-x [Google Scholar]
- I. Aliev, Y. Zhbankov, S. Martynov, Forging of shafts, discs and rings from blanks with inhomogeneous temperature field. Journal of Chemical Technology & Metallurgy, 51(4), 393 (2016) [Google Scholar]
- Y. Chen, L. Peng, F. Lixia, Blank shape design for sheet metal forming based on geometrical resemblance. Procedia Engineering, 81, 1487 (2014). doi:10.1016/j.proeng.2014.10.178 [Google Scholar]
- T. Haikova, R. Puzyr, D. Savelov, V. Dragobetsky, R. Argat, R. Sivak, The Research of the Morphology and Mechanical Characteristics of Electric Bimetallic Contacts. In: Chenchevoy, V. et al. (eds.) Proceedings of the 25th IEEE International Conference on Problems of Automated Electric Drive. Theory and Practice, PAEP 2020, Ukraine, 579 (2020). doi:10.1109/PAEP49887.2020.9240847 [Google Scholar]
- G. R. Semyon, Statistical Methods for Experimental Data Processing. Evaluating Measurement Accuracy (Springer, New York, NY, 2013) [Google Scholar]
- R.H. Puzyr, V.T. Shchetynin, R.H. Arhat, Yu.B. Sira, V.V. Muravlov and S.I. Kravchenko, Numerical modeling of pipe parts of agricultural machinery expansion by stepped punches. IOP Conference Series: Materials Science and Engineering, 1018(1), 012013 (2021). doi:10.1088/1757-899X/1018/1/012013 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.