Open Access
E3S Web Conf.
Volume 290, 2021
2021 3rd International Conference on Geoscience and Environmental Chemistry (ICGEC 2021)
Article Number 03004
Number of page(s) 6
Section Environmental Energy Protection and Energy-Saving Sustainability
Published online 14 July 2021
  1. Guo, R. (2004) Supplement to determining method of cut-off value of net pay. Petroleum Exploration and Development, 31: 140-143. [Google Scholar]
  2. Liu, M.L., Feng, Z.P., Cai, Y.L., et al. (2014) Present situation and developmental trend of the research on methodology for determination of physical properties cut-off of an effective reservoir. Acta Geologica Sichuan, 34: 9-13. [Google Scholar]
  3. Lu, Z.Y., Han, X.H., Zhang, X., et al. (2016) Research status and outlook for methods of determining petrophysical property cutoffs. Journal of China University of Petroleum(Edition of Natural Science), 40: 32-40. [Google Scholar]
  4. Cong, L., Ma, S.Z., Li, W.L., et al. (2013) Study on physical property lower limit of effective reservoir of deep layer in Qingshui-Yuanyang Area. Advanced Materials Research, 2117: 104-108. [Google Scholar]
  5. Zhang, C., Jiang, Y.Q., Guo, H.G., et al. (2010) Methods to determine the matrix petrophysical property low limits of the effective reservoir. Petroleum Geophysics, 8: 11-16. [Google Scholar]
  6. Zhang, X.G. (2012) Application of empirical statistical method in the determination of lower limit of physical properties. World Well Logging Technology, 191: 17-18. [Google Scholar]
  7. Geng, L.X., Cao, Y.S., Yi, Z.W., et al. (1999) A study on petrophysical property cutoffs of sandstone reservoirs in Pucheng oil field. Petroleum Exploration and Development, 26: 81-83. [Google Scholar]
  8. Dong, L.Q. (2005) A research on reservoir physical texture lower-bound of the second zone of Xujiahe Formation of south area of west Sichuan, MS dissertation, Chengdu University of Technology, (April 2005). [Google Scholar]
  9. Wan, N.M., Cao, Y.C., Zheng, L.J., et al. (2012) Lower limit studies of the physical properties for the effective reservoirs in sha no.4 member of Binnanlijin area. Petroleum Geology & Oilfield Development in Daqing, 30: 50-56. [Google Scholar]
  10. Wang, Y.Z., Cao, Y.C. (2010) Lower property limit and controls on deep effective clastic reservoirs of paleogene in Chezhen depression. Acta Sedimentologica Sinica, 28: 752-761. [Google Scholar]
  11. Yu, W.Q., Ye, S.D., Lu, M.J. (2011) Study on lower limit of physical properties of E1f3 effective reservoir in Gaoyou Sag. Complex Hydrocarbon Reservoirs, 4: 5-9. [Google Scholar]
  12. Jiao, C.H., Xia, D.D., Wang, J., et al. (2009) Methods for determining the petrophysical property cutoffs of extra-low porosity and permeability sandstone reservoirs——an example from the Xishanyao Formation reservoirs in Yongjin oilfield. Oil & Gas Geology, 30: 379-383. [Google Scholar]
  13. Li, J., Yang, Y., Wang, S.F., et al. (2012) Determination of the lower limits of the physical properties of consolidated sandstone reservoirs in eastern Sulige gas field. Special Oil & Gas Reservoirs, 18: 52-56. [Google Scholar]
  14. Jin, Y.Q., Wang, G.C., Zhang, T. (2010) A new study on the lower limit standard of effective reservoir thickness in Maliangou area of Zhiluo oilfield. Science and technology of western China, 9: 11-13. [Google Scholar]
  15. Cui, Y.B. (2007) Method for determining the lower limit value of effective reservoir physical properties. World Well Logging Technology, 22: 32-35. [Google Scholar]
  16. Li, X.Y., Guo, J.X., Zhang, Q.X., et al. (2008) Determining method for the lower limit of physical-property parameters in gas reservoirs. Natural Gas Exploration and Development, 31: 33-38. [Google Scholar]
  17. Li, J., Zhao, F., Liu, P. (2012) Determination of lower limits of porosity and permeability of tight sand gas reservoirs in the eastern block of the Sulige Gas Field. Natural Gas Industry, 32: 31-35. [Google Scholar]
  18. Han, X.H., Cui, Y.F., Li, F.B., et al. (2012) Classification and conventional logging identification of inhomogeneous reservoir in DB gas field. Progress in Geophysics, 27: 186-192. [Google Scholar]
  19. Wang, Y.Z., Cao, Y.C., Song, G.Q., et al. (2008) Application of production test data to evaluation of the effective reservoir in deep clastic of Bonan Sag. Acta Petrolei Sinica, 29: 701-706, 710. [Google Scholar]
  20. Wu, X.H., He, L., Fang, H.C. (2007) Analysis and application of specific productivity index. Petroleum Exploration and Development, 34: 745749. [Google Scholar]
  21. Shao, C.X., Wang, Y.Z., Cao, Y.C. (2008) Two new methods used to determine the low limits of effective reservoir physical properties and their applications—a case study on deep clastic reservoir of Palaeogene in Dongying depression. Journal of Oil and Gas Technology, 30: 414-416. [Google Scholar]
  22. Wang, Y.Z., Cao, Y.C., Song, G.Q., et al. (2009) Determination of physical property lower limit of deep clastic effective reservoirs of Paleogene in Dongying depression. Journal of China University of Petroleum(Edition of Natural Science), 33: 16-21. [Google Scholar]
  23. Li, M., Liu, J.Z., Wang, X.L., et al. (2010) Study on the lower limit standard of physical properties of Chang 6 ultra-low permeability reservoir in W South area of S oil field. Liaoning Chemical Industry, 39: 1065-1068. [Google Scholar]
  24. Peng, B., Lv, G.X. (2008) Method for determining lower limit of physical properties of low porosity and low permeability sandstone reservoirs in Shan 23 member of Zizhou gas field. Petroleum Geophysics, 6: 11-13. [Google Scholar]
  25. Gao, Y., Jiang, Y.Q., Yang, C.C., et al. (2011) Minimum flow pore throat radius for determination of the lower limits of parameters in low permeability reservoir. Science & Technology Review, 29: 34-38. [Google Scholar]
  26. Wei, X.W., Xie, J.R., Tang, D.H., et al. (2008) Methods of determining the matrix petrophysical cutoffs of low porosity and low permeability sandstone reservoir—taking the J2s1 oil reservoir in LA field in central Sichuan as an example. Natural Gas Industry, s1: 28-31. [Google Scholar]
  27. Jiang, Y.Q., Gao, Y., Xu, H.W., et al. (2010) New method for determining cut-off parameter in hydrophilic and low permeable sandstone reservoir—case of gas reservoir. Petroleum Geology and Recovery Efficiency, 17: 58-60. [Google Scholar]
  28. Fu, J.H., Luo, A.X., Zhang, N.N., et al. (2014) Determine lower limits of physical properties of effective reservoirs in Chang 7 Oil Formation in Ordos Basin. China Petroleum Exploration, 19: 8287. [Google Scholar]
  29. Shi, Y., Yang, Z.M., Huang, Y.Z. (2009) The study of cut-off pore-throat in reservoir. Journal of Southwest Petroleum University(Science & Technology Edition), 31: 42-44. [Google Scholar]
  30. Duan, X.G., Wang, H.H., Hu, Y.Z., et al. (2003) Methods of determining the lower limits of different parameters of reservoir in Anpeng oilfield, Henan. Journal of Chengdu University of Technology(Science & Technology Edition), 30: 169-173. [Google Scholar]
  31. Wang, W.M., Lu, S.F., Tian, W.C., et al. (2016) A new method to determine porosity and permeability cutoffs of tight oil reservoirs by using thickness of adsorption water film:A case study from the Damintun Sag, Liaohe oifield. Oil & Gas Geology, 37: 135-140. [Google Scholar]
  32. Xiang, J.H., Yin, D.Y. (2018) The lower limit of the flowing pore throat radius in the extra-low permeability reservoir. IOP Conference Series: Earth and Environmental Science, 113. [Google Scholar]
  33. He, C.Z., Hua, M.Q. (1998) Thickness of water film in oil and gas reservoirs. Petroleum Exploration and Development, 25: 91-93. [Google Scholar]
  34. Liu, D.X., Yue, X.A., Hou, J.R., et al. (2005) Experimental study of adsorded water layer on solid particle surface. Acta Mineralogica Sinica, 25: 15-19. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.