Open Access
| Issue |
E3S Web Conf.
Volume 297, 2021
The 4th International Conference of Computer Science and Renewable Energies (ICCSRE'2021)
|
|
|---|---|---|
| Article Number | 01044 | |
| Number of page(s) | 5 | |
| DOI | https://doi.org/10.1051/e3sconf/202129701044 | |
| Published online | 22 September 2021 | |
- E. Curiel-Reyna, J. Contreras, T. Rangel-Ortis, A. Herrera, L. Banos, A. del Real, M.E. Rodriguez, Mater. Manuf. Process. 23, 1 (2008) [Google Scholar]
- J. R. Davis, Alloying: understanding the basics (ASM International, Materials Park Ohio, 2001) [Google Scholar]
- M. L. Bauccio, ASM Metals Reference Book, 3rd Edition (ASM International, Materials Park Ohio, 1993) [Google Scholar]
- H. E. Boyer, Selection of materials for service environments: Source Book (ASM International, Materials Park Ohio, 1987) [Google Scholar]
- ASM International, Handbook Committee, Properties and Selection--Irons, Steels, and Highperformance Alloys, Vol. 1 (ASM International, Materials Park Ohio, 1990) [Google Scholar]
- H.F. Xu, J. Zhao, W.Q. Cao, J. Shib, C.Y. Wang, C. Wang, J. Lia, H. Dong, Mater. Sci. Eng. A 532 (2012) [Google Scholar]
- T. Tsuchiyama, T. Inoue, J. Tobata, D. Akama, S. Takaki, Scr. Mater. 122 (2016) [Google Scholar]
- L. I. Parfenov, G. A. Sorokin, Met. Sci. Heat Treat. 13, 5 (1971) [Google Scholar]
- H. Huang, O. Matsumura, T. Furukawa, Retained austenite in low carbon, Mat. Sci. Technol. 10, 7 (1994) [Google Scholar]
- S. K. Putatunda, Mater.Des. 24, 6 (2003) [Google Scholar]
- B. K. Zuidema, D. K. Subramanyam, W.C. Leslie, Metall. Trans. A 18, 9 (1987) [Google Scholar]
- N. Ya. Samarin, R.Z. Kats, V.A. Startsev, I.A. Petrova, Met. Sci. Heat Treat. 23, 1 (1981) [Google Scholar]
- J. L. Cao, A. M. Zhao, J. X. Liu, J. G. He, R. Ding, J. Iron Steel Res. Int. 21 (2014) [Google Scholar]
- B. Steenken, J. L. L. Rezende, D. Senk, Mater. Sci. Technol. 33, 5 (2017) [Google Scholar]
- Z. M. Ding, S. J. Wang, F. Yang, Y. Yan, Trans. Mater. Heat Treat. 28 (2007) [Google Scholar]
- I.I. Kleshcheva, E.A. Shur, Metalloved. Term. Obrab. Met. 1 (1990) [Google Scholar]
- J. Y. Liu, Y. S. Wu, L. Wei, S. B. Wang, T. Yan, W. D. Liu, J. Mater. Eng. (Chinese) 3 (2003) [Google Scholar]
- L. Dong, Z. Ding, B. Liang, Z. Xu, Phase Transit. 88, 11 (2015) [Google Scholar]
- W. Cheng, Y. Li, Metall. Mater. Trans. A 43, 6 (2012) [Google Scholar]
- V. M. Dusevich, E. A. Shur, I. A. Semenov, Met. Sci. Heat Treat. 31, 9 (1989) [Google Scholar]
- P. L. Gruzin, V.I. Grigorkin, V. V. Mural, L.N. Moskaleva, Met. Sci. Heat Treat. 11, 1 (1969) [Google Scholar]
- E. R. MagdaluyoJr., Marthony, S. Ausa, R.I. Tinio, Transactions on engineering technologies (Springer, Singapore, 2016) [Google Scholar]
- W. D. Callister, D.G. Rethwisch, Fundamentals of Materials Science and Engineering : An Integrated Approach (Jhon Wily & Sons, Hoboken, 2011) [Google Scholar]
- G. F. Vander Voort, Metallography, Principles and Practice (ASM International, Materials Park Ohio, 1999) [Google Scholar]
- D. Andrews, G. Scholes, G. Wiederrecht, Comprehensive Nanoscience and Technology, 1st edition (Elsevier B.V., Amsterdam, 2010) [Google Scholar]
- J. Chapman, F. Regan, T. Sullivan, Nanoparticles in Anti-microbial Materials: Use and Characterisation (RSC publishing, Cambridge, 2012) [Google Scholar]
- O. Ben Lenda, A. Tara, F. Lazar, O. Jbara, A. Hadjadj, E. Saad, Strength Mater. 52 (2020) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.