Open Access
Issue |
E3S Web Conf.
Volume 297, 2021
The 4th International Conference of Computer Science and Renewable Energies (ICCSRE'2021)
|
|
---|---|---|
Article Number | 01050 | |
Number of page(s) | 5 | |
DOI | https://doi.org/10.1051/e3sconf/202129701050 | |
Published online | 22 September 2021 |
- Yann Rouchausse, Patrice Peyre, Denis Defauchy, Gilles Regnier - Experimental and numerical analysis of the selective laser sintering (SLS) of PA12 and PEKK semicrystalline polymers - Journal Of Materials Processing Technology - Vol. 225, p.326–336 - 2015 [Google Scholar]
- Roberts, I. A., Wang, C. J., Esterlein, R., Stanford, M., and Mynors, D. J., 2009, “A Three-Dimensional Finite Element Analysis of the Temperature Field during Laser Melting of Metal Powders in Additive Layer Manufacturing,” Int. J. Mach. Tools Manuf., 49(12-13), pp. 916–923. [Google Scholar]
- R. Nicole, “Title of paper with only first word capitalized,” J. Name Stand. Abbrev., in press. [Google Scholar]
- Dong, L., Makradi, A., Ahzi, S., and Remond, Y., 2009, “Three Dimensional Transient Finite Element Analysis of the Selective Laser Sintering Process,” J. Mater. Process. Technol., 209(2), pp. 700–706. [Google Scholar]
- Hussein, A., Hao, L., Yan, C., and Everson, R., 2013, “Finite Element Simulation of the Temperature and Stress Fields in Single Layers Built Without-Support in Selective Laser Melting,” Mater. Des., 52(0), pp. 638–647. [Google Scholar]
- Patil, R. B., and Yadava, V., 2007, “Finite Element Analysis of Temperature Distribution in Single Metallic Powder Layer During Metal Laser Sintering,” Int. J. Mach. Tools Manuf., 47(78), pp. 1069–1080. M. Young, The Technical Writer’s Handbook. Mill Valley, CA: University Science, 1989. [CrossRef] [Google Scholar]
- Tobias Laumera, C., Katrin Wudyb, E., Maximilian Drexlerb, C.E., Philipp Amenda, B. Stephan Rotha, B., Dietmar Drummerb, E., Michael Schmidta, D., 2014. Fundamental investigation of selective laser sintering of polymers for additive manufacture, blz Bayerisches Laserzentrum GmbH, Erlangen, Germany. [Google Scholar]
- Kai Zeng, Deepankar Pal, Brent Stucker, A review of thermal analysis methods in Laser Sintering and Selective Laser Melting, January 2012, Department of Industrial Engineering, University of Louisville, Louisville, KY 40292. [Google Scholar]
- David C. Deisenroth, Ramin Moradi, Amir H. Shooshtari, Farah Singer, Avram Bar-Cohen & Michael Ohadi 2017, Review of heat exchangers enabled by polymer and polymer composite additive manufacturing, [Google Scholar]
- G. N. Levy, 2010, “The role and future of the laser technology in the additive manufacturing environment,” Physics Procedia, 5, 65–80. [CrossRef] [Google Scholar]
- N. Guo, M. C. Leu, 2013 “Additive manufacturing: technology, applications and research needs,” Front. Mech. Eng., 8(3), 215–243. [Google Scholar]
- Manfred Schmid, Antonio Amado, and Konrad Wegener 2015; Polymer powders for selective laser sintering (SLS) Manfred Schmid, Antonio Amado, and Konrad Wegener, Citation: 1664, 160009; doi: 10.1063/1.4918516 [Google Scholar]
- Manfred Schmida and Antonio Amado 2014, Materials perspective of polymers for additive manufacturing with selective laser sintering, irpd Institute for Rapid Product Development, CH-9014 St. Gallen, Switzerland Konrad Wegener Department of Mechanical and Process Engineering, Swiss Institute of Technology, CH-8093 Zürich, Switzerland. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.