EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 313 (2021) E3S Web Conf., 313 (2021) 08004 References
Open Access
Issue
E3S Web Conf.
Volume 313, 2021
19th International Stirling Engine Conference (ISEC 2021)
Article Number 08004
Number of page(s) 15
Section Stirling Engines Prototype Development and Testing
DOI https://doi.org/10.1051/e3sconf/202131308004
Published online 22 October 2021
  1. J. Banks, N. B. Harris, “Geothermal Potential of Foreland Basins: A Case Study from the Western Canadian Sedimentary Basin”, Geothermics 76, pp. 74–92 (2018) [Google Scholar]
  2. C. Speer, “A comparison between Stirling and organic Rankine cycle engines for waste heat recovery applications”, International Stirling Engine Conference (ISEC) (2021) [Google Scholar]
  3. C. P. Speer, “Modifications to Reduce the Minimum Thermal Source Temperature of the ST05G-CNC Stirling Engine”, Thesis, University of Alberta, 2018. [Google Scholar]
  4. D. A. Miller, “Experimental Investigation of Stirling Engine Modelling Techniques at Reduced Source Temperatures”, Thesis, University of Alberta, 2019. [Google Scholar]
  5. C. J. A. Stumpf, “Parameter Optimization of a Low Temperature Difference GammaType Stirling Engine to Maximize Shaft Power”, Thesis, University of Alberta, 2018. [Google Scholar]
  6. M. Nicol-Seto, “Investigation of Drive Mechanism Modification to Increase Thermodynamic Performance of a Low Temperature Difference Gamma Stirling Engine”, Thesis, University of Alberta, 2021. Unpublished. [Google Scholar]
  7. M. Nicol-Seto, “Experimental evaluation of piston motion modification to improve the thermodynamic power output of a low temperature gamma Stirling engine”, International Stirling Engine Conference (ISEC) (2021) [Google Scholar]
  8. J. P. Michaud, “Low Temperature Difference Alpha-Type Stirling Engine for the Experimental Determination of Optimal Parameters to Maximize Shaft Power”, Thesis, University of Alberta, 2020. [Google Scholar]
  9. S. M. W. Middleton, “A modular numerical model for Stirling engines and single-phase thermodynamic machines”, Thesis, University of Alberta, 2021. [Google Scholar]
  10. J. R. Senft, “Mechanical Efficiency of Heat Engines”, Cambridge University Press, 2007. [Google Scholar]
  11. J. R. Senft, V. J. Senft, “Bellcrank Mechanisms for Stirling Engines”, IECEC 96 Proceedings of the 31st Intersociety Energy Conversion Engineering Conference (1996) [Google Scholar]
  12. A. Ross, “Making Stirling Engines”, 3rd edition, Andy Ross (1997) [Google Scholar]
  13. S. P. Weaver, Cool Energy Inc., Personal conversation (2021) [Google Scholar]
  14. Bellofram Corp., “Bellofram Design Manual”, https://www.belloframdiaphragm.com/diaphragm-literature [Google Scholar]
  15. Bellofram Corp., Personal conversation (2021) [Google Scholar]
  16. G. Walker, “Stirling Engines”, pp. 300ff., Clarendon Press (1980) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.