EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 318 (2021) E3S Web Conf., 318 (2021) 03008 References
Open Access
Issue
E3S Web Conf.
Volume 318, 2021
Second International Conference on Geotechnical Engineering – Iraq (ICGE 2021)
Article Number 03008
Number of page(s) 12
Section Developments in Structural Engineering and Construction Materials
DOI https://doi.org/10.1051/e3sconf/202131803008
Published online 08 November 2021
  1. FEMA 313, 1998. NEHRP: Promoting the Adoption and Enforcement of Seismic Building Codes: A Guidebook for State Earthquake and Mitigation Managers. Washington, D.C., Federal Emergency Management Agency. [Google Scholar]
  2. Uniform Building Code (UBC), 1976. International Conference of Building Officials (ICBO), Whittier, California. [Google Scholar]
  3. Soyluk, A. and Harmankaya, Z.Y., 2012. The history of development in Turkish seismic design codes. International Journal of Civil & Environmental Engineering, 12(1), pp.25–29. [Google Scholar]
  4. Mosier, W. G., 2000. Seismic assessment of reinforced concrete beam-column joints. M.Sc. Thesis, University of Washington, Seattle. [Google Scholar]
  5. Mitra, N., 2007. An analytical study of reinforced concrete beam-column joint behavior under seismic loading. Ph.D Disertation, University of Washington, USA. [Google Scholar]
  6. Shiohara, H., 2001. New model for shear failure of RC interior beam-column connections. Journal of Structural Engineering, 127(2), pp.152–160. [CrossRef] [Google Scholar]
  7. ACI 352R-2, 2002. Recommendations for design of beam column connections in monolithic reinforced concrete structures. ACI code committee, USA. [Google Scholar]
  8. Lowes, L.N. and Altoontash, A., 2003. Modeling reinforced-concrete beam-column joints subjected to cyclic loading. Journal of Structural Engineering, 129(12), pp.1686–1697. [CrossRef] [Google Scholar]
  9. Kim, J. and LaFave, J.M., 2007. Key influence parameters for the joint shear behaviour of reinforced concrete (RC) beam-column connections. Engineering structures, 29(10), pp.2523–2539. [CrossRef] [Google Scholar]
  10. Hassan, W.M., 2011. Analytical and experimental assessment of seismic vulnerability of beam-column joints without transverse reinforcement in concrete buildings. PhD Thesis, University of California, Berkeley. [Google Scholar]
  11. Gombosuren, D. and Maki, T., 2020. Prediction of Joint Shear Deformation Index of RC Beam-Column Joints. Buildings, 10(10), p.176. [CrossRef] [Google Scholar]
  12. Pantelides, C.P., Clyde, C. and Reaveley, L.D., 2002. Performance-based evaluation of reinforced concrete building exterior joints for seismic excitation. Earthquake Spectra, 18(3), pp.449–480. [CrossRef] [Google Scholar]
  13. Karayannis, C.G., Chalioris, C.E. and Sirkelis, G.M., 2008. Local retrofit of exterior RC beam-column joints using thin RC jackets—An experimental study. Earthquake Engineering & Structural Dynamics, 37(5), pp.727–746. [CrossRef] [Google Scholar]
  14. Elshafiey, T.M., Atta, A.M., Afefy, H.M. and Ellithy, M.E., 2016. Structural performance of reinforced concrete exterior beam-column joint subjected to combined shear and torsion. Advances in Structural Engineering, 19(2), pp.327–340. [CrossRef] [Google Scholar]
  15. Ahmed, A., Saleem, M.M. and Siddiqui, Z.A., 2019. Effect of Varying Top Beam Reinforcement Anchorage Details on Ductility of HSC Beam-Column Joints. KSCE Journal of Civil Engineering, 23(5), pp.2272–2280. [CrossRef] [Google Scholar]
  16. Favvata, M.J., Izzuddin, B.A. and Karayannis, C.G., 2008. Modelling exterior beam-column joints for seismic analysis of RC frame structures. Earthquake engineering & structural dynamics, 37(13), pp.1527–1548. [CrossRef] [Google Scholar]
  17. Saito, T. and Kikuchi, M., 2012. A new analytical model for reinforced concrete beam-column joints subjected to cyclic loading. In Proceedings Of The Fifthteenth World Conference On Earthquake Engineering Lisbon, Portugal (Vol. 2012). [Google Scholar]
  18. Abbas, A.A., Mohsin, S.M.S. and Cotsovos, D.M., 2014. Seismic response of steel fibre reinforced concrete beam-column joints. Engineering Structures, 59, pp.261–283. [CrossRef] [Google Scholar]
  19. Kotsovou, G.M., Cotsovos, D.M. and Lagaros, N.D., 2017. Assessment of RC exterior beam-column Joints based on artificial neural networks and other methods. Engineering Structures, 144, pp.1–18. [CrossRef] [Google Scholar]
  20. Yagmur, E., 2020. Shear strength prediction for exterior beam-column joint. BEU Journal of Science, 9(2), pp.766–779. [Google Scholar]
  21. Tsonos, A.D.G., 2010. Performance enhancement of R/C building columns and beam-column joints through shotcrete jacketing. Engineering Structures, 32(3), pp.726–740. [CrossRef] [Google Scholar]
  22. Hassan, W.M. and Moehle, J.P., 2018. Shear Strength of Exterior and Corner Beam-Column Joints without Transverse Reinforcement. ACI Structural Journal, 115(6). [CrossRef] [Google Scholar]
  23. Vollum, R.L. and Newman, J.B., 1999. Strut and tie models for analysis/design of external beam—column joints. Magazine of concrete research, 51(6), pp.415–425. [CrossRef] [Google Scholar]
  24. Diro, G.A. and Kabeta, W.F., 2020. Finite Element Analysis of Key Influence Parameters in Reinforced Concrete Exterior Beam Column Connection Subjected to Lateral Loading. European Journal of Engineering and Technology Research, 5(6), pp.689–697. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.