EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 345 (2022) E3S Web Conf., 345 (2022) 01007 References
Open Access
Issue
E3S Web Conf.
Volume 345, 2022
XXV Biennial Symposium on Measuring Techniques in Turbomachinery (MTT 2020)
Article Number 01007
Number of page(s) 12
Section Instrumentation
DOI https://doi.org/10.1051/e3sconf/202234501007
Published online 29 March 2022
  1. A. Lienert, Automated Progressive Traversing of Fast Response Probes in Unsteady Turbomachinery Flow, Semester Thesis Turbomachinery Laboratory ETH Zurich (2003). [Google Scholar]
  2. M. Marti, Experimental Investigation of Unsteady Flow in an Axial Fan Using Fast Response Aerodynamic Probes, Semester Thesis Turbomachinery Laboratory ETH Zurich (2003) [Google Scholar]
  3. M. Oschwald, Experimental Investigation of Unsteady Flow Fields using a Progressive Traversing Algorithm, Semester Thesis Turbomachinery Laboratory ETH Zurich (2003) [Google Scholar]
  4. C. Lenherr, Experimental Investigation of Smart Probe Concept for Unsteady Flows in Axial Turbines (LISA), Diploma Thesis Turbomachinery Laboratory ETH Zurich (2004) [Google Scholar]
  5. T. Behr, L. Porreca, T. Mokulys, A. I. Kalfas, R. S. Abhari, Multistage Aspects and Unsteady Effects of Stator and Rotor Clocking in an Axial Turbine with Low Aspect Ratio Blading, ASME Paper No. GT 2004-53612 Vienna (2004) [Google Scholar]
  6. J. D. Denton, Loss Mechanisms in Turbomachines, J. Turbomach. Trans. ASME, 115, pp 621-656, October (1993) [CrossRef] [Google Scholar]
  7. O. P. Sharma, G. F. Picket, R. H. Ni, Assessment of Unsteady Flows in Turbines, J. Turbomach. Trans. ASME 114, pp 79-90 and ASME Paper No. 90-GT-150 (1992) [CrossRef] [Google Scholar]
  8. D. J. Doorly, Modeling the Unsteady Flow in a Turbine Passage, J. Turbomach. Trans. ASME 110, pp 27-37 and ASME Paper No. 87-GT-197 (1998) [Google Scholar]
  9. J. F. Thompson, B. K. Soni, N. P. Weatherill, Handbook of Grid Generation, ISBN 0849326877 CRC Press (1998) [CrossRef] [Google Scholar]
  10. A. I. Kalfas, R. L. Elder, Determination of the Intermittency Distribution in the Boundary Layer of a Flat Plate with C4 Leading Edge, ERCOFTAC Bulletin No 24 on Transition pp 65-67 (1995) [Google Scholar]
  11. A. Binder, R. Romey, Secondary Flow Effects and Mixing of the Wake behind a Turbine Stator ASME Journal of Turbomachinery 105, pp 40-46 (1983) [Google Scholar]
  12. M. Treiber, P. Kupferschmied, G. Gyarmathy, Analysis of error propagation arising from measurements with a miniature pneumatic 5-hole probe, Proc. 14th Symposium on Measuring Techniques for Transonic and Supersonic Flows in Cascades and Turbomachines, Limerick, Ireland (1998) [Google Scholar]
  13. J. Schlienger, A. Pfau, A. I. Kalfas, R. S. Abhari, Single Pressure Transducer Probe for 3D Flow Measurements, The 16th Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines, Cambridge, UK (2002) [Google Scholar]
  14. K. Tanaka, A. I. Kalfas, H. P. Hodson, Development of Single Sensor Fast Response Pressure Probes, XVth Symposium on Measuring Techniques in Transonic and Supersonic Flows in Cascades and Turbomachines Florence Italy (2000) [Google Scholar]
  15. C. R. Gossweiler, P. Kupferschmied, G. Gyarmathy, On Fast-Response Probes, Part 1: Technology, Calibration and Application to Turbomachinery, ASME Paper No. 94-GT-026 The Hague (1994) [Google Scholar]
  16. H. Humm, C. R. Gossweiler, G. Gyarmathy, On Fast-Response Probes, Part 2: Aerodynamic Probe Design Studies, ASME Paper No. 94-GT-027 The Hague (1994) [Google Scholar]
  17. P. Kupferschmied, P. Köppel, C. Roduner, G. Gyarmathy, On the Development and Application of the Fast-Response Aerodynamic Probe System in Turbomachines - Part 1: The Measurement System, J. Turbomach. Trans. ASME 122, issue 3, pp 505-516 (2000) [CrossRef] [Google Scholar]
  18. J. Schlienger, A. Pfau, A. I. Kalfas, R. S. Abhari, Measuring Unsteady 3D Flow with a single pressure transducer, Proceedings of the 5th European Turbomachinery Conference, Paper No TM02/63, pp.849-858 (2003) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.