EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 352 (2022) E3S Web Conf., 352 (2022) 01076 References
Open Access
Issue
E3S Web Conf.
Volume 352, 2022
7th International Conference on Energy Science and Applied Technology (ESAT 2022)
Article Number 01076
Number of page(s) 7
Section Fossil Energy & Geological Engineering
DOI https://doi.org/10.1051/e3sconf/202235201076
Published online 27 June 2022
  1. Fu C., Yang H., Guo T.Y., et al. Study on sensitivity of injection parameters of polymer/surface binary flooding in type II B reservoir [J]. China Energy and Environmental Protection, 2021, 43(8): 81–86. [Google Scholar]
  2. Niu J.G. Practices and understanding of polymer flooding enhanced recovery technique In Daqing oilfield [J]. Petroleum Geology & Oilfield Development in Daqing, 2004, 23(5): 91–93. [Google Scholar]
  3. Cheng J.C., Liao G.Z., Yang Z.Y., et al. Pilot test of ASP flooding in Daqing oilfield [J]. Petroleum Geology & Oilfield Development in Daqing, 2001, 20(2): 46–49. [Google Scholar]
  4. Liu Q. Research on Key Chemical Control Technology of Binary Flooding System and Its Field Application in Jin 16 Block [J]. Advances in Fine Petrochemicals, 2017, 18(5): 18–20. [Google Scholar]
  5. Di S.J., Liu D., Cheng H.Y., et al. Analysis and evaluation of displacement efficiency of Hongbei 113 [J]. Reservoir Evaluation and Development, 2016, 6(1): 44–49. [Google Scholar]
  6. Wang L.L., Li W.H., Zhang Y.Q., et al. An Experiment Study on Polymer-surfactant Flooding for Bei3 Region Low Permeability Reservoir in Maling Oilfield [J]. Journal of Chongqing University of Science and Technology(Natural Sciences Edition), 2014, 16(2): 82–86. [Google Scholar]
  7. Xu H.W., Wang H.M., Liu R.J., et al. Fine Multiparameter Evaluation for Polymer Flooding in Conglomerate Reservoirs and Its Application: A Case Study from Lower Karamay Formation in District Qidong-1, Karamay Oilfield [J]. Xinjiang Petroleum Geology, 2018, 39(2): 169–175. [Google Scholar]
  8. Wang C.J., Hong L., Gao R.M., et al. Status-quo and Challenges of Enhanced Oil Recovery in Low Permeability Reservoirs [J]. Unconventional Oil & Gas, 2018, 5(3): 102–108. [Google Scholar]
  9. Luo L.T., Liao G.Z., Yan We H., et al. Study on Hydrodynamic Size and Optimal Matching Injection of Polymer in the Chemical Flooding [J]. Oilfield Chemistry, 2016, 33(1): 125–136. [Google Scholar]
  10. Wu S.H., Xiong Q.H. Geology of oil and gas reservoirs [M]. Beijing: Petroleum Industry Press, 1998: 113–122. [Google Scholar]
  11. Yang Z.M., Jiang H.Q., Li S.T., et al. Characteristic Parameters of Microscopic Pore Structures of Low Permeability Gas Reservoirs—By Using Sulige and Dina Low Permeability Gas Reservoirs for Example [J]. Journal of Oil and Gas Technology, 2007, 29(6): 108–110. [Google Scholar]
  12. Prodanovic M., Lindquist W.B., Seright R.S. Porous Sructure and FuidPrtitioning in Plyethylene Cores from 3D X-Ray Microtomographic Imaging[J]. Journal of Colloid and Interface Science, 2006, 298(1): 282–297. [CrossRef] [PubMed] [Google Scholar]
  13. Dewanckele J., De Kock T., Boone M.A., et al. 4D Imaging and Quantification of Pore Structure Modifications Inside Natural Building Stone by Means of High Resolution X-Ray CT [J]. Science of the Total Environment, 2012, 416: 436–448. [CrossRef] [Google Scholar]
  14. Bijeljic B., Muggeridge A.H., Blunt M.J. Pore-Scale Modeling of Longitinal Dispersion[J]. Water Resources Research, 2004, 40(11): 417–427. [CrossRef] [Google Scholar]
  15. Bai B., Zhu R.K., Wu S.T., et al. Multi-scale method of Nano(Micro)-CT study on microscopic pore structure of tight sandstone of Yanchang Formation, Ordos Basin [J]. Petroleum Exploration and Development, 2013(3):329–333. [Google Scholar]
  16. Sakdinawat A., Attwood, D. Nanoscale X-Ray Imaging [J]. Nature Photonics, 2010, 267(4): 840–848. [CrossRef] [Google Scholar]
  17. Attwood D. Microscopy: Nanotomography Comes of Age[J]. Nature, 2006, 442(10): 642–643. [CrossRef] [PubMed] [Google Scholar]
  18. Qu L., Shun W., She H.H., et al. Characterization Technique of Pore Structure by 3D Digital Core Based on CT Scanning and Its Application:An Example from Sangonghe Formation of 116 Well Field in Mobei Oilfield [J]. Geoscience, 2014(1):190–196. [Google Scholar]
  19. Liu X.J., Xiong J., Liang L.X., et al. Study on the characteristics of pore structure of tight sand based on micro-CT scanning and its influence on fluid flow [J]. Progress in Geophysics, 2017, 32(3): 1019–1028. [Google Scholar]
  20. Su N., Duan Y.G., Yu C.S. Reconstruction of microscopic pore structure in low permeability gas reservoirs by micro-CT scanning:an example from the Upper Shaximiao Formation in Xinchang gas field [J]. Oil & Gas Geology, 2011(05):792–796. [Google Scholar]
  21. Sun W., Shi C.G., Zhao J.Z., et al. Reconstruction of microscopic pore structure in low permeability gas reservoirs by micro-CT scanning:an example from the Upper Shaximiao Formation in Xinchang gas field [J]. Acta Geologica Sinica, 2006(5):775–779. [Google Scholar]
  22. Hao L.W., Wang Q., Tang J. Research progress of reservoir microscopic pore structure [J]. Lithologic Reservoirs, 2013(5):123–128. [Google Scholar]
  23. Sun L.D., Wu X.L., Zhou W.F. et al. Technologies of enhancing oil recovery by chemical flooding in Daqing Oilfield, NE China[J]. Petroleum Exploration and Development, 2018, 45(4): 636–645. [Google Scholar]
  24. Wang B., Wu T., Li Y., et al. The effects of oil displacement agents on the stability of production from ASP (alkaline/surfactant/polymer) flooding [J]. Colloids & Surfaces A Physicochemical & Engineering Aspects, 2011, 379(1-3):121–126. [CrossRef] [Google Scholar]
  25. Zhang X.S., Ding M.A. The Key Reservoir Technology Condition of Polymer Flooding in Continental Deposit Heavy Oil Reservoir [J]. Journal of oil and gas technology, 2009, 31(1): 127–129. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.