Open Access
E3S Web Conf.
Volume 362, 2022
BuildSim Nordic 2022
Article Number 09004
Number of page(s) 8
Section Design and Performance
Published online 01 December 2022
  1. Abadie, M. Wargocki, P. Rode, C. Rojas, G. Kolarik, J. Laverge, J. Cony, L. Qin, M. et Blondeau, P. (2017). Indoor Air Quality Design and Control in Low-energy Residential Building Subtask 1: Defining the metrics. IEA Annex 68 [Google Scholar]
  2. Aldes. (2018). « Avis Technique 14.5/17-2266_V2 », 55. « Annual AQ statistics ». s. d. European Environment Agency. accessed on 23 March 2022. [Google Scholar]
  3. ANSI/ASHRAE/IES (2019). ASHRAE Standard 90.1-2019 : Energy Standard for Buildings Except Low-Rise Residential Buildings. [Google Scholar]
  4. Bruinen de Bruin, Y. Koistinen, K. Kephalopoulos, S. Geiss, O. Tirendi, S. et Kotzias, D. (2008). Characterisation of Urban Inhalation Exposures to Benzene, Formaldehyde and Acetaldehyde in the European Union. Environmental Science and Pollution Research 15 (5). 417–430. [CrossRef] [PubMed] [Google Scholar]
  5. Cony Renaud Salis, L. Abadie, M. Wargocki, P. and Rode, C. (2017). Towards the definition of indicators for assessment of indoor air quality and energy performance in low-energy residential buildings. Energy and Buildings 152 492–502. [CrossRef] [Google Scholar]
  6. Danish Buidling Practice. s. d. accessed on 3 april 2022. [Google Scholar]
  7. Dols, W.S. and Polidoro, B.J. (2015). CONTAM User Guide and Program Documentation Version 3.2. NIST TN 1887. National Institute of Standards and Technology. [Google Scholar]
  8. Durier, F., Carrié, F. R. and Sherman, Max. (2018). VIP 38: What is smart ventilation? AIVC. [Google Scholar]
  9. Vasileios, F. Kolarik, J. and Smith K. M. (2021). The Impact of Wind Pressure and Stack Effect on the Performance of Room Ventilation Units with Heat Recovery. Energy and Buildings 234 110689. [CrossRef] [Google Scholar]
  10. Guyot, G., Sherman, M. H. and Walker, I. S. (2018). Smart ventilation energy and indoor air quality performance in residential buildings: A review. Energy and Buildings 165 416–430. [CrossRef] [Google Scholar]
  11. Guyot, G. Walker, I. S. Sherman, M., Linares, P., Garcia Ortega, S. and Caillou, S. (2019). VIP 39: A review of performance-based approaches to residential smart ventilation. AIVC. [Google Scholar]
  12. Guyot, G., Walker, I.S. and Sherman, M.H. (2018). Performance based approaches in standards and regulations for smart ventilation in residential buildings: a summary review. International Journal of Ventilation 1–17. [Google Scholar]
  13. Guyot, G. Melois, A. Bernard, A.M. Coeudevez, C.S. Déoux, S. Berlin, S. Parent, E. et al. (2017). Ventilation Performance and Indoor Air Pollutants Diagnosis in 21 French Low Energy Homes. International Journal of Ventilation, Septembre, 1-9. [Google Scholar]
  14. HCSP. (2013). Valeurs repères d’aide à la gestion pour les particules dans l’air intérieur ». Rapport de l’HCSP. Paris : Haut Conseil de la Santé Publique. [Google Scholar]
  15. HCSP. (2019). Benchmarks for managing indoor air quality for formaldehyde. Rapport de l’HCSP. Paris : Haut Conseil de la Santé Publique. [Google Scholar]
  16. Jardinier, E. Parsy, F. Guyot, G. Berthin, S. and Berthin, S. (2018). Durability of humidity-based demand-controlled ventilation performance: results of a 10 years monitoring in residential buildings. In Proceedings of the 39th AIVC conference « Smart ventilation for buildings ». Antibes Juan-Les-Pins, (France). [Google Scholar]
  17. Nilan. s. d. Comfort 300LR By Nilan fiche produit. [Google Scholar]
  18. Odgaard, T.R. (2019). Challenges when retrofitting multi-storey buildings with interior thermal insulation. B Y G D T U. Rapport. Technical University of Denmark, Department of Civil Engineering. [Google Scholar]
  19. Poirier, B. Guyot, G. Geoffroy, H. Woloszyn, M. Ondarts, M. and Gonze, E. (2021). Pollutants Emission Scenarios for Residential Ventilation Performance Assessment. A Review. Journal of Building Engineering 42: 102488. [CrossRef] [Google Scholar]
  20. Poirier, B. Guyot, G. and Monika Woloszyn. (2020). Development of Performance-Based Assessment Methods for Conventional and Smart Ventilation in Residential Buildings, AIVC 2020 conference Athens (Greece) [Google Scholar]
  21. Poirier, B. Guyot, G. Woloszyn, M. Geoffroy, H. Ondarts, M. and Gonze, E. (2021). Development of an Assessment Methodology for IAQ Ventilation Performance in Residential Buildings: An Investigation of Relevant Performance Indicators. Journal of Building Engineering 43 : 103140. [CrossRef] [Google Scholar]
  22. Toke Rammer, N. Drivsholm, C. (2010). Energy Efficient Demand Controlled Ventilation in Single Family Houses. Energy and Buildings 42, no 11 [Google Scholar]
  23. Smith, K. M. and Kolarik, J. (2019). Simulations of a Novel Demand-Controlled Room-Based Ventilation System for Renovated Apartments. IOP Conference Series: Materials Science and Engineering 609: 032041. [CrossRef] [Google Scholar]
  24. Smith, K. M. and Svendsen, S. (2016). The Effect of a Rotary Heat Exchanger in Room-Based Ventilation on Indoor Humidity in Existing Apartments in Temperate Climates. Energy and Buildings 116: 349–361. [CrossRef] [Google Scholar]
  25. Walton, G.N. and Emmerich, S.J. (1994). CONTAM93: a multizone airflow and contaminant dispersal model with a graphic user interface. Air Infiltration Review 16 (1): 6–8. [Google Scholar]
  26. WHO. (2010). WHO Guidelines for indoor air quality: selected pollutants. [Google Scholar]
  27. Zukowska, D. Rojas, G. Burman, E. Guyot, G. Bocanegra-Yanez, M. D. C. Laverge, J. Cao, Guangyu. Kolarik, J. (2020). Ventilation in Low Energy Residences - a Survey on Code Requirements, Implementation Barriers and Operational Challenges from Seven European Countries. International Journal of Ventilation. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.