Open Access
Issue
E3S Web Conf.
Volume 368, 2023
4th African Regional Conference on Geosynthetics (GeoAfrica 2023)
Article Number 02033
Number of page(s) 8
Section TECHNICAL PAPERS: Stabilization
DOI https://doi.org/10.1051/e3sconf/202336802033
Published online 17 February 2023
  1. B. Soni, U. Patel, G. Mishra, S. K. Karme, Continuous pyrolysis of sawdust in a vertical moving type continuous reactor, Conference: Advances in chemical engineering and science (ACES) At: Department of chemical engineering, Indian institute of science education and rese. Bhopal, Madhya Pradesh, India (2019). [Google Scholar]
  2. M. Mageswari, B. Vidivelli, the use of saw dust ash as fine aggregate replacement in concrete, J. Environ. Res. Devt., 3(3), 720–726(2009). [Google Scholar]
  3. E. Okobia, Evaluation of saw dust ash as mineral filler in asphalt mixture, Thesis of Master of Science Degree in Civil Engineering, Department of civil engineering, faculty of engineering, Ahmadu Bello University, Zaria Nigeria (2016). [Google Scholar]
  4. D.O. Osuya, H. Mohmmed, Evaluation of sawdust ash as a partial replacement for mineral filler in asphaltic concrete, Ife J. Sci., 19(2), 431–440(2017). [CrossRef] [Google Scholar]
  5. MoRTH (Ministry of Road Transport and Highways). 2013. Specifications or road and bridge works. New Delhi, India: Indian Roads Congress. [Google Scholar]
  6. ASTM. 2011. Standard test methods for quantitative extraction of bitumen from bituminous paving mixtures. ASTM D2172-11. West Conshohocken, PA: ASTM. [Google Scholar]
  7. ASTM. 2013.Standard guide for elemental analysis by wavelength dispersive X-ray fluorescence spectrometry. ASTM E1621-13. West Conshohocken, PA: ASTM. [Google Scholar]
  8. ASTM. 2017.Standard test method for percent air voids in, compacted asphalt mixtures. ASTM. D3203–17. West Conshohocken, PA: ASTM [Google Scholar]
  9. S.E. Zoorob, L.B. Suparma, Laboratory design and investigation of the properties of continuously graded asphaltic concrete containing recycled plastics aggregate replacement (Plastiphalt), J. Cement and Composites, 22(4), 233–242(2000). [CrossRef] [Google Scholar]
  10. ASTM. 2012. Indirect Tensile Strength for Bituminous Mixtures. ASTM D6931-12, 2012 West Conshohocken, PA: ASTM. [Google Scholar]
  11. ASTM. 2000. Standard test method for effects of water on compressive strength of compacted bituminous mixtures. ASTM D1075-11. West Conshohocken, PA: ASTM [Google Scholar]
  12. MS-2, 2014. Asphalt mix design methods, 7th edition. Asphalt Institute, USA. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.