Open Access
| Issue |
E3S Web of Conf.
Volume 465, 2023
8th International Conference on Industrial, Mechanical, Electrical and Chemical Engineering (ICIMECE 2023)
|
|
|---|---|---|
| Article Number | 01016 | |
| Number of page(s) | 7 | |
| Section | Symposium on Mechanical, Chemical, and Advanced Materials Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202346501016 | |
| Published online | 18 December 2023 | |
- V. C. Montufar and E. L. Rojas, “Relationship Between Environmental Management and Social Responsibility in the Tile and Brick Sector,” Prod. y Limpia, vol. 17, no. 1, pp. 20–34, (2022), doi: 10.22507/PML.V17N1A2. [CrossRef] [Google Scholar]
- Y. Huachaca, “Determinación de la conductividad térmica de ladrillos utilizando vidrio reciclado para zonas alto andinas,” Dir. Gen. Investig. - Univ. Peru. Unión, pp. 1–93, 2020, [Online]. Available: https://tesis.pucp.edu.pe/repositorio/bitstream/handle/20.500.12404/14615/Moran_Paucar_Estrés_académico_apoyosocial1.pdf?sequence=1&isAllowed=y [Google Scholar]
- Z. Zhang, S. Lin, Q. Lian, and C. Jin, “RepStore : A Self-Managing and Self-Tuning Storage Backend with Smart Bricks 2. Background : P2P DHT The common terminology referring to a peer in,” Management, (2003) [Google Scholar]
- J. Jänsch and H. Birkhofer, “The development of the guideline VDI 2221 - The change of direction,” 9th Int. Des. Conf. Des. 2006, pp. 45– 52, (2006) [Google Scholar]
- K. N. Santoso et al., “Modification design of Melanger machine with reverse engineering method and VDI 2221,” Proc. Int. Conf. Ind. Eng. Oper. Manag., pp. 2711–2721, (2021) [Google Scholar]
- W. Zeiler, “Morphology in conceptual building design,” Technol. Forecast. Soc. Change, vol. 126, no. xxxx, pp. 102–115, 2018, doi: 10.1016/j.techfore.2017.06.012. [CrossRef] [Google Scholar]
- T. D. L. Gontarski and R. K. Scalice, “Educational tool based on a morphological matrix for design alternative generation for use in railway wagon design,” Procedia CIRP, vol. 100, pp. 822–827, 2021, doi: 10.1016/j.procir.2021.05.037. [CrossRef] [Google Scholar]
- J. Ölvander, B. Lundén, and H. Gavel, “A computerized optimization framework for the morphological matrix applied to aircraft conceptual design,” CAD Comput. Aided Des., vol. 41, no. 3, pp. 187–196, 2009, doi: 10.1016/j.cad.2008.06.005. [CrossRef] [Google Scholar]
- S. Nidhra, “Black Box and White Box Testing Techniques - A Literature Review,” Int. J. Embed. Syst. Appl., vol. 2, no. 2, pp. 29–50, 2012, doi: 10.5121/ijesa.2012.2204. [CrossRef] [Google Scholar]
- X. Zhang, L. Wu, Y. Fang, and H. Jiang, “A Study of FR Video Quality Assessment of Real Time Video Stream,” Int. J. Adv. Comput. Sci. Appl., vol. 3, no. 6, pp. 1–7, 2012, doi: 10.14569/ijacsa.2012.030601. [Google Scholar]
- O. G. Woge, C. O. G. Morán, and A. L. Chau, “Introducción al método del elemento finito: Solidworks y Matlab,” Ideas en Ciencias la Ing., vol. 1, no. 1, pp. 27–47, 2020, [Online]. Available: https://ideasencienciasingenieria.uaemex.mx/article/view/1458 9 [Google Scholar]
- O. Rojas and L. Rojas, “Diseño de productos asistidos,” 2006, [Online]. Available: https://www.redalyc.org/articulo.oa?id=76820304 [Google Scholar]
- M. Orošnjak, M. Jocanović, and V. Karanović, “Simulation and Modeling of A Hydraulic System in FluidSim,” XVII Int. Sci. Conf. Ind. Syst., no. November, pp. 50–53, (2017) [Google Scholar]
- G. Silva, “Open FluidSim: uma ferramenta multiplataforma para sistemas hidráulicos e pneumáticos,” p. 65, (2018) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.