EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 465 (2023) E3S Web of Conf., 465 (2023) 01028 References
Open Access
Issue
E3S Web of Conf.
Volume 465, 2023
8th International Conference on Industrial, Mechanical, Electrical and Chemical Engineering (ICIMECE 2023)
Article Number 01028
Number of page(s) 4
Section Symposium on Mechanical, Chemical, and Advanced Materials Engineering
DOI https://doi.org/10.1051/e3sconf/202346501028
Published online 18 December 2023
  1. D. Ratna, Handbook of Thermoset Resins. (2009). [Google Scholar]
  2. S. L. Case, T. C. Ward, S. L. Case, and T. C. Ward, “Physical properties of a bisphenol-F epoxy containing a silica filler treated with silane coupling agents,” vol. 8464, no. May, (2016), doi: 10.1080/00218460309574. [Google Scholar]
  3. J. Sepulcre-guilabert, T. P. Ferrándiz-gómez, and J. M. Martín-, “Properties of polyurethane adhesives containing natural calcium carbonate + fumed silica mixtures calcium carbonate + fumed silica mixtures,” vol. 4243, no. May, (2016), doi: 10.1163/156856101743409. [Google Scholar]
  4. P. D. Setyawan, W. Martadinata, S. Sugiman, S. Salman, A. D. Catur, and A. Zainuri, “Water absorption and tensile properties of the hybrid of fly ash-CaCO3/epoxy composites,” in IOP Conference Series: Materials Science and Engineering, Institute of Physics Publishing, (Nov. 2019). doi: 10.1088/1757-899X/694/1/012037. [Google Scholar]
  5. C. Srivabut, T. Ratanawilai, and S. Hiziroglu, “Effect of nanoclay, talcum, and calcium carbonate as filler on properties of composites manufactured from recycled polypropylene and rubberwood fiber,” Constr Build Mater, vol. 162, pp. 450–458, (2018), doi: 10.1016/j.conbuildmat.2017.12.048. [CrossRef] [Google Scholar]
  6. L. Valentini et al., “Synergistic effect of graphene nanoplatelets and carbon black in multifunctional EPDM nanocomposites,” Compos Sci Technol, vol. 128, pp. 123–130, (2016), doi: 10.1016/j.compscitech.2016.03.024. [CrossRef] [Google Scholar]
  7. H. Khoramishad, O. Alizadeh, and L. F. M. da Silva, “Effect of multi-walled carbon nanotubes and silicon carbide nanoparticles on the deleterious influence of water absorption in adhesively bonded joints,” J Adhes Sci Technol, vol. 32, no. 16, pp. 1795–1808, (2018), doi: 10.1080/01694243.2018.1447295. [CrossRef] [Google Scholar]
  8. Y. Ou, C. González, and J. J. Vilatela, “Interlaminar toughening in structural carbon fiber/epoxy composites interleaved with carbon nanotube veils,” Compos Part A Appl Sci Manuf, vol. 124, no. May, p. 105477, (2019), doi: 10.1016/j.compositesa.2019.105477. [CrossRef] [Google Scholar]
  9. S. Sugiman, S. Salman, and M. Maryudi, “Effects of volume fraction on water uptake and tensile properties of epoxy filled with inorganic fillers having different reactivity to water,” Mater Today Commun, vol. 24, (Sep. 2020), doi: 10.1016/j.mtcomm.2020.101360. [PubMed] [Google Scholar]
  10. ASTM, “D790-03-Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulation Materials,” ASTM Standards, pp. 1–11, (2015), [Online]. Available: http://scholar.google.com/scholar?hl=en&btnG=Search&q=intitle:Standard+Test+Methods+for+Flexural+Properties+of+Unreinforced+and+Reinforced+Plastics+and+Electrical+Insulating+Materials#0 [Google Scholar]
  11. S. Y. Fu, X. Q. Feng, B. Lauke, and Y. W. Mai, “Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate-polymer composites,” Compos B Eng, vol. 39, no. 6, pp. 933–961, (2008), doi: 10.1016/j.compositesb.2008.01.002. [CrossRef] [Google Scholar]
  12. E. Foo, M. Jaafar, A. Aziz, and L. C. Sim, “Properties of spin coated epoxy/silica thin film composites: Effect of nano- and micron-size fillers,” Compos Part A Appl Sci Manuf, vol. 42, no. 10, pp. 1432–1437, (2011), doi: 10.1016/j.compositesa.2011.06.007. [CrossRef] [Google Scholar]
  13. T. H. Hsieh, A. J. Kinloch, A. C. Taylor, and S. Sprenger, “The effect of silica nanoparticles and carbon nanotubes on the toughness of a thermosetting epoxy polymer,” J Appl Polym Sci, vol. 119, no. 4, pp. 2135–2142, (2011), doi: 10.1002/app.32937. [CrossRef] [Google Scholar]
  14. D. Carolan, A. J. Kinloch, A. Ivankovic, S. Sprenger, and A. C. Taylor, “Mechanical and fracture performance of carbon fibre reinforced composites with nanoparticle modified matrices,” Procedia Structural Integrity, vol. 2, pp. 96–103, (2016), doi: 10.1016/j.prostr.2016.06.013. [CrossRef] [Google Scholar]
  15. B. Pukánszky, “Influence of interface interaction on the ultimate tensile properties of polymer composites,” Composites, vol. 21, no. 3, pp. 255– 262, (1990), doi: 10.1016/0010-4361(90)90240-W. [CrossRef] [Google Scholar]
  16. B. Pukanszky and G. Vörös, “Mechanism of interfacial interactions in particulate filled composites,” vol. 5543, no. (May, 2016), doi: 10.1163/156855493X00266. [Google Scholar]
  17. L. Stefan, F. Benboudjema, J. M. Torrenti, and B. Bissonnette, “Prediction of elastic properties of cement pastes at early ages,” Comput Mater Sci, vol. 47, no. 3, pp. 775–784, (2010), doi: 10.1016/j.commatsci.2009.11.003. [CrossRef] [Google Scholar]
  18. T. Matsunaga, J. K. Kim, S. Hardcastle, and P. K. Rohatgi, “Crystallinity and selected properties of fly ash particles,” vol. 325, pp. 333–343, (2002). [Google Scholar]
  19. G. Wypych, Handbook of Fillers, vol. 28, no. 2. (1999). doi: 10.1108/prt.1999.12928bae.002. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.