EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 465 (2023) E3S Web of Conf., 465 (2023) 02026 References
Open Access
Issue
E3S Web of Conf.
Volume 465, 2023
8th International Conference on Industrial, Mechanical, Electrical and Chemical Engineering (ICIMECE 2023)
Article Number 02026
Number of page(s) 7
Section Symposium on Electrical, Information Technology, and Industrial Engineering
DOI https://doi.org/10.1051/e3sconf/202346502026
Published online 18 December 2023
  1. Team Kurikulum PSTI 2019, “Program Studi Sarjana Teknik Industri: Buku Pedoman Akademik Kurikulum Pendidikan Tinggi di Era Industri 4.0,” Kurikulum PSTI 2019 edisi Revisi 2 Februari 2021, 2021. [Google Scholar]
  2. L. D. Sulistya, L. Herdiman, & S. Susmartini, “Perancangan Stasiun Kerja Student di Lintasan Perakitan Manual pada Praktikum Perancangan Teknik Industri 3 dengan Pendekatan Learning Factory,” Jurnal Sistem Teknik Industri, vol. 21, no. 2, 2019, pp. 52-62. doi:10.32734/jsti.v21i2.1228. [Google Scholar]
  3. A. S. Y. Najmudin, L. Herdiman, & W. A. Jauhari, “Props Design on Manual Assembly Lines in Industrial Engineering Design Practicum 3 With Learning Factory Approach,” Journal of Engineering Design and Technology, vol. 19, no. 2, 2019, pp. 103-106. doi:10.31940/logic.v1912.1369. [Google Scholar]
  4. L. Aft, B. Amaba, D. Berry, et al., “Industrial and Systems Engineering Body of Knowledge,” Institute of Industrial & Systems Engineers, Institute of Industrial & Systems Engineers, 2021, pp. 2. [Google Scholar]
  5. D. Gordič, M. Babič, D. Jelič, D. KonTalovič, & V. Vukašinovič, “Integrating Energy and Environmental Management in Wood Furniture Industry,” Scientific World Journal, vol. 12, 2014, pp. 1-18. doi:10.1155/2014/596958. [CrossRef] [Google Scholar]
  6. Menteri Riset, Teknologi, dan Pendidikan Tinggi Republik Indonesia, “Standar Nasional Pendidikan Tinggi,” Peraturan Menteri Riset, Teknologi, Dan Pendidikan Tinggi Republik Indonesia Nomor 44 Tahun 2015. [Google Scholar]
  7. D. T. H. Silaen, L. Herdiman, & S. Susmartini, “Design of assembly tools at woodworking and upholstery workstations with PUGH's Method to improve productivity,” Journal of Physics: Conference Series, vol. 1450, 2020, pp. 1-8 doi:10.1088/1742-6596/1450/1/ 0121151. [Google Scholar]
  8. A. S. Putri, & D. Amalia, “Analysis of Work Posture and WorkRelated Musculoskeletal Disorders with ROSA Method at Batam Environmental Service,” Procedia of Engineering and Life Science, vol. 2, no. 1, 2021, pp. 1-8. doi:10.21070/pels.v2i0.1174. [Google Scholar]
  9. P. A. Siregar, M. Rizwany, & Nurhayatic, “Work Posture and Musculoskeletal Disorders of Coconut Peeler Workers in Sei Apung Village Asahan Regency,” Jurnal Riset Kesehatan, vol. 9, no. 2, 2020, pp. 154-158. doi: 10.31983/jrk.v9i2.6435. [CrossRef] [Google Scholar]
  10. N. H. Nejad, A. Choobineh, H. Rahimifard, H. R. Haidari, & S. H. R. Tabatabaei, “Musculoskeletal Risk Assessment in Small Furniture Manufacturing Workshops,” International Journal of Occupational Safety and Ergonomics, vol. 19, no. 2, 2013, pp. 275-284. doi:10.1080/10803548.2013.110. [CrossRef] [PubMed] [Google Scholar]
  11. A. Thetkathuek, & P. Meepradit, “Work-related musculoskeletal disorders among workers in an MDF furniture factory in eastern Thailand,” International Journal of Occupational Safety and Ergonomics, vol. 24, no. 2, 2016, pp. 207-217. doi:10.1080/ 10803548.2016.125. [Google Scholar]
  12. A. Naddeo, N. Cappetti, & M. Vallone, “Range of Rest Posture of Human Lower Limbs,” Proceedings of the 20th Congress of the International Ergonomics Association (IEA) 2018, pp. 33-46. 2018. doi:10.1007/978-3-319-96071-5_4. [Google Scholar]
  13. E. N. Corlett, “Static muscle loading and the evaluation of posture,” Evaluation of Human Work, 3rd edition, pp. 453-496, 2005. doi:10.1201/9781420055948.ch16. [Google Scholar]
  14. G. Di Leone, M. Carino, S. Nicoletti, G. Trani, & L. Ambrosi, “Manufacture of upholstered furniture and work-related upper limb musculoskeletal disorders: an industrial sector prevention project,” Med Lav., vol. 99, no. 4, 2008, pp. 250-261. [Google Scholar]
  15. G. Marchesi, G. Ballardini, L. Barone, P. Giannoni, C. Lentino, A. De Luca, & M. Casadio, “Modified Functional Reach Test: Upper-Body Kinematics and Muscular Activity in Chronic Stroke Survivors,” Sensors, vol. 22, 230, 2022, pp. 1-15. doi:10.3390/s22010230. [PubMed] [Google Scholar]
  16. R. Krishnan, N. Björsell, E. M. Gutierrez-Farewik, & C. Smith, “A survey of human shoulder functional kinematic representations,” Medical & Biological Engineering & Computing. vol. 57, 585, 2018, pp. 1-29. doi:10.1007/s11517-018-1903-3. [Google Scholar]
  17. N. J. Jarque-Bou, M. Vergara, J. L. Sancho-Bru, V. Gracia-Ibanez, & A. Roda-Sales, “Hand Kinematics Characterization While Performing Activities of Daily Living Through Kinematics Reduction,” IEEE Transactions on Neural Systems and Rehabilitation Engineering, vol. 28, no. 7, 2020, pp. 1556-1565. doi:10.1109/tnsre.2020.299864. [CrossRef] [PubMed] [Google Scholar]
  18. D. Avers, & M. Brown, “Daniels and Worthingham’s Muscle Testing: Techniques of Manual Examination and Performance Testing,” Saunders Publisher. 2018, pp. 203-205. [Google Scholar]
  19. H. J. Hislop, D. Avers, & M. Brown, “Principles of manual muscle testing, in Daniels and Worthingham’s Muscle Testing: Techniques of Manual Examination,” Elsevier, St. Louis, Mo, USA, 9th edition, 2014, pp. 1-9. [Google Scholar]
  20. H. Usa, M. Matsumura, K. Ichikawa, & H. Takei, “A Maximum Muscle Strength Prediction Formula Using Theoretical Grade 3 Muscle Strength Value in Daniels et al.’s Manual Muscle Test, in Consideration of Age: An Investigation of Hip and Knee Joint Flexion and Extension,” Rehabilitation Research and Practice, 2017, vol. 6, pp. 1-9. doi:10.1155/2017/3985283. [CrossRef] [Google Scholar]
  21. B. F. Mentiplay, L. G. Perraton, K. J. Bower, B. Adair, Y. H. Pua, G. P. Williams, & R. A. Clark, “Assessment of Lower Limb Muscle Strength and Power Using Hand-Held and Fixed Dynamometry: A Reliability and Validity Study,” PLOS ONE, vol. 10, no. 10, 2015, pp. 1-18. doi:10.1371/journal.pone.0140 [Google Scholar]
  22. C. C. Norkin, & D. J. White, “Measurement of joint motion: a guide to goniometry,” F. A. Davis Company, 2016, pp. 8-9. Musculoskeletal Key (15 July 2022), “The Orthopaedic Examination: A Comprehensive Overview,” Retrieved Juni 30, 2023, from https://musculoskeletalkey.com/the-orthopaedic-examination-acomprehensive-overview/ [Google Scholar]
  23. Biology Stack Exchange (15 July 2022), “Confusion regarding degrees of flexion and a goniometer,” Retrieved Juni 30, 2023, from https://biology.stackexchange.com/questions/52346/confusionregarding-degrees-of-flexion-and-a-goniometer [Google Scholar]
  24. Y. Skaik, “The bread and butter of statistical analysis “t-test” Uses and misuses,” Pak J. Med. Sci., vol. 31, no. 6, 2015, pp. 1-2. [CrossRef] [Google Scholar]
  25. A. Naddeo, N. Cappetti, R. Califano, & M. Vallone. “Manual Assembly Workstation Redesign Based on A New Quantitative Method for Postural Comfort Evaluation,” Applied Mechanics and Materials, vol. 459, 2014, pp. 368-379. doi:10.4028/www.scientific.net/AMM.459.368. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.