Open Access
Issue |
E3S Web of Conf.
Volume 465, 2023
8th International Conference on Industrial, Mechanical, Electrical and Chemical Engineering (ICIMECE 2023)
|
|
---|---|---|
Article Number | 02045 | |
Number of page(s) | 6 | |
Section | Symposium on Electrical, Information Technology, and Industrial Engineering | |
DOI | https://doi.org/10.1051/e3sconf/202346502045 | |
Published online | 18 December 2023 |
- Kementrian Perindustrian RI, “Siaran Pers: Tumbuh 4,83 Persen, Sektor Industri Paling Moncer di Triwulan III-(2022),” 8 November 2022. [Online]. Available: https://kemenperin.go.id/artikel/23683/Tumbuh-4,83-Persen,-SektorIndustri-Paling-Moncer-di-Triwulan-III-2022. [Accessed January 2023]. [Google Scholar]
- Trizudha, Rony, Sri Rahayuningsih, and Ana Komari, “Studi Kualitas Puding Melalui Pendekatan Six Sigma Studi Kasus di PT. Keong Nusantara Abadi,” JURMATIS (Jurnal Manajemen Teknologi dan Teknik Industri), vol. 1, no. 1, pp. 44-53, (2019). [Google Scholar]
- V. Gaspersz, Total Quality Management, 2 ed., Jakarta: PT Gramedia Pustaka Utama, (2002). [Google Scholar]
- Crosby, P.B. Quality is Free. New York: McGraw-Hill, (1979). [Google Scholar]
- Purnama, Jaka, Suparto Suparto, and Pramudia Christa Dinata, “Peningkatan Produktivitas dengan Implementasi Metode Six Sigma pada Produk Element Boiler,” Jurnal SimanteC, vol. 5, no. 3, (2016). [Google Scholar]
- Harahap, Bonar, Luthfi Parinduri, and An Ama Lailan Fitria, “Analisis Pengendalian Kualitas Dengan Menggunakan Metode Six Sigma (Studi Kasus: PT. Growth Sumatra Industry),” vol. 13, no. 3, pp. 211-218, (2018). [Google Scholar]
- George, M. L, Lean Six Sigma, Dallas: McGraw-Hill, (2002). [Google Scholar]
- Fithri, Prima, “Six Sigma sebagai Alat Pengendalian Mutu pada Hasil Produksi Kain Mentah PT Unitex, Tbk,” J@ ti Undip: Jurnal Teknik Industri, vol. 14, pp. 43-52, (2019). [CrossRef] [Google Scholar]
- Walujo, Djoko Adi, Titiek Koesdijati, and Yitno Utomo, Pengendalian Kualitas, Scopindo Media Pustaka, (2020). [Google Scholar]
- Rozak, Ahmad, Choesnul Jaqin, and Hasbullah Hasbullah,”Increasing Overall Equipment Effectiveness in Automotive Company Using DMAIC and FMEA Method,” Journal Européen des Systèmes Automatisés, vol. 53, no. 1, pp. 55-60, (2020). [Google Scholar]
- Prasetio, Eko, “Analisis Pengendalian Kualitas Proses Assembling Busi untuk Mencegah Terjadinya Defect Menggunakan DMAIC di PT. Busi Indonesia.” [Google Scholar]
- Ahmad, Fandi, “Six Sigma DMAIC sebagai Metode Pengendalian Kualitas Produk Kursi pada UKM,” JISI: Jurnal Integrasi Sistem Industri, vol. 6, no.1, pp. 11-17, (2019). [Google Scholar]
- Wibowo, Satria Kukuh, “Identifikasi Defect pada Hasil Cetakan Kartu Menggunakan Mesin Komori Lithrone L-420 di PT Multigrafika Global,” (2022). [Google Scholar]
- Soeganda, Richard Julianno, Reza Setiawan, and Ratna Dewi Anjani, “Perancangan Poros, Puli dan Sabuk-V pada Mesin Cuci Samsung Diamond Drum WA80V4,” Jurnal Ilmiah Wahana Pendidikan, vol. 8, no. 18, pp. 320-331, (2022). [CrossRef] [Google Scholar]
- Landi, Daniele, et al, “Environmental and Economic Evaluation of the Sheet Metal Stamping Process Using Alternative Lubricants,” International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. vol. 59223. American Society of Mechanical Engineers, (2019). [Google Scholar]
- Amin, Qoyinul, Dedi Dwilaksana, and Nasrul Ilminnafik, “Analisis Pengendalian Kualitas Cacat Produk Kaleng 307 di PT. X Menggunakan Metode Six Sigma,” Jurnal Energi Dan Manufaktur, vol. 12, no. 2, pp. 52, (2019). [CrossRef] [Google Scholar]
- Riadi, Natazsa Putri, “Studi Kualitas Pelapisan Permukaan SS 304 menggunakan Material Komposit.” [Google Scholar]
- Haghighat, Fariborz, and Lisa De Bellis, “Material Emission Rates: Literature Review, and The Impact Of Indoor Air Temperature and Relative Humidity,” Building and Environment, vol. 33, no. 5, pp. 261-277, (1998). [CrossRef] [Google Scholar]
- Albireo, Ari. “Optimalisasi Pengamanan Muatan Semen dengan menggunakan Palet di Kapal Ro-Ro Di MV Largo,” (2019). [Google Scholar]
- MK, Satria Nova, and Mohammad Nurul Misbah, “Analisis Pengaruh Salinitas dan Suhu Air Laut terhadap Laju Korosi Baja A36 pada Pengelasan SMAW,” Jurnal teknik ITS, vol 1, no. 1, pp. G57-G77, (2012). [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.