Open Access
E3S Web of Conf.
Volume 382, 2023
8th International Conference on Unsaturated Soils (UNSAT 2023)
Article Number 09007
Number of page(s) 6
Section Water Retention Curves
Published online 24 April 2023
  1. A. Klute. Tillage effects on the hydraulic properties of soils: A review. In: D.M. Krai and S. Hawkins (Editors), Predicting Tillage Effects on Soil Physical Properties and Processes. Am. Soc. Agron., Madison, WI, U.S.A., Spec. Publ. 44, 29–41 (1982) [Google Scholar]
  2. S. Ahmed, C.W. Lovell, S. Diamond. J Geot Eng Div 100, 07-425 (1974) [Google Scholar]
  3. F. Vinale, A. d’Onofrio, C. Mancuso, F. Santucci De Magistris, F. Tatsuoka. Opening Lecture at The Int. Conf. on Pre-Failure Deformation Characteristics of Geomaterials. Torino, Italy, 2, 955–1007 (2001) [Google Scholar]
  4. J.K. Mitchell, D.R. Hooper, J.K. Campanella. J Soil Mec Found Div 4, 41-65 (1965) [Google Scholar]
  5. S.K. Vanapalli, D.G. Fredlund, D.E. Pufahl. Géotechnique 49, 143-159 (1999) [Google Scholar]
  6. E. Romero, A. Gens, A. Lloret. Eng Geol 54, 117–127 (1999) [CrossRef] [Google Scholar]
  7. R. Ventini, E. Dodaro, C.G. Gragnano, D. Giretti, M. Pirone. Geosciences 11, 192 (2021) [CrossRef] [Google Scholar]
  8. R. Ventini, E. Dodaro, D. Giretti, M. Pirone, F. Zarattini, C.G. Gragnano, V. Fioravante, F. Gabrieli, G. Gottardi, C. Mancuso, Analysis of transient seepage through a river embankment by means of centrifuge modelling, in Proceedings of the 8th International Conference on Unsaturated Soils “Towards Unsaturated Soils Engineering”, UNSAT, 2–5 May 2023, Milos, Greece (2023) [Google Scholar]
  9. V. Girardi, E. Dodaro, R. Ventini, M. Pirone,G. C. Gragnano, D. Giretti, F. Zarattini, F. Gabrieli, Numerical study of uplift induced levee failure for the design of a centrifuge test, in Proceedings of Fifth International Conference on New Developments in Soil Mechanics and Geotechnical Engineering, Near East University, Nicosia, TRNC (2022) [Google Scholar]
  10. V. Fioravante, D. Giretti. Acta Geotech 11, 953–968 (2016) [CrossRef] [Google Scholar]
  11. ASTM D698-12(2021), Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft3 (600 kN- m/m3)), ASTM International, West Conshohocken, PA, 2021, [Google Scholar]
  12. O. Wendroth, W. Ehlers, J. Hopmans, H. Kage, J. Halbertsma, J. Wosten. Soil Science Soc of America J 57, 1436-1443 (1993) [CrossRef] [Google Scholar]
  13. M. Nicotera, R. Papa, G. Urciuoli. Geot Test J 33, 263–285 (2010) [Google Scholar]
  14. M.R. Taha, M.H. Kabir. Env Geology 47, 375–381 (2005) [CrossRef] [Google Scholar]
  15. E. Birle, D. Heyer, N. Vogt. Acta Geo 3, 191–200 (2008) [CrossRef] [Google Scholar]
  16. T.W. Lambe. Spec Tech Publ No. 163, Am Soc Test Mater (ASTM), Philadelphia, 56–67 (1954) [Google Scholar]
  17. E.C. Lawton, R.J. Fragaszy, M.D. Hetherington. J Geotech Eng 118, 1376–1394 (1992) [CrossRef] [Google Scholar]
  18. V. Ferber, J.C. Auriol, Y.J. Cui, J.P. Magnan. Can Geotech J 45, 252-265 (2008) [CrossRef] [Google Scholar]
  19. S.M. Rao, K. Revanasiddappa. J Geotech Geoenviron Eng 126, No. 1, 85–90 (2000) [CrossRef] [Google Scholar]
  20. A.S. Dias, A. Kamath, M. Pirone, G. Urciuoli. E3S Web of Conferences 195, 03003 (2020) [CrossRef] [EDP Sciences] [Google Scholar]
  21. A.S. Dias, M. Pirone, M.V. Nicotera, G. Urciuoli. Geomech Energy Environ 30, 100235 (2022a) [Google Scholar]
  22. A.S. Dias, M. Pirone, M.V. Nicotera, G. Urciuoli. Acta Geotech 17, 837–855 (2022b) [CrossRef] [Google Scholar]
  23. M.T. Van Genuchten. Soil Science Soc of America J 44, 892-898 (1980) [CrossRef] [Google Scholar]
  24. X. Hou, S. Qi, T. Li, S. Guo, Y. Wang, Y. Li, L. Zhang. Eng Geology 277, (2020) [Google Scholar]
  25. P. Delage, M. Audiguier, Y.J. Cui, M. Howat. Can Geot J 33, 150-158 (1996) [CrossRef] [Google Scholar]
  26. D.G. Fredlund, A. Xing, S. Huang. Can Geot J 31, 533-546 (1994) [CrossRef] [Google Scholar]
  27. C.W.W. Ng, Y.W. Pang. J Geot Geoenviron Eng 126, 167-188 (2000) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.