Open Access
| Issue |
E3S Web of Conf.
Volume 390, 2023
VIII International Conference on Advanced Agritechnologies, Environmental Engineering and Sustainable Development (AGRITECH-VIII 2023)
|
|
|---|---|---|
| Article Number | 06011 | |
| Number of page(s) | 6 | |
| Section | Agricultural Mechanization, Civil Engineering and Energetics | |
| DOI | https://doi.org/10.1051/e3sconf/202339006011 | |
| Published online | 01 June 2023 | |
- G. D. Dzhabarov, S. D. Baltabaev, D. A. Kotov, N. D. Soloviev, Primary processing of cotton (Light Industry, Moscow, 1978) [Google Scholar]
- M. Agzamov, M. Rakhmatov, M. Agzamov, O. Olimov, K. Nosirov, Search for ways to increase yield and improve product quality in the process of saw ginning, IOP Conf. Ser.: Earth Environ. Sci. 939(1), 012073 (2021) [CrossRef] [Google Scholar]
- A. Maksudov, Influence of the optimal ratio between the speeds of the saw cylinder and the raw cotton roller on the quality indices of ginning (Tashkent, 1976) [Google Scholar]
- A. Khamidov, P. N. Tyutin, Sh. U. Rakhmatkariev, D. M. Mukhammadiev, On the movement of cotton and seeds inside the working chamber of a fiber separator with an additional seed-removing device, Int. Conf. on Actual problems of flax processing in modern conditions (Kostroma, 2002) [Google Scholar]
- M. T. Tillayev, Technology of primary processing of cotton (Tashkent, 2015) [Google Scholar]
- N. K. Safarov, Influence of raw cotton roller density on technological parameters of saw ginning (Tashkent, 1998) [Google Scholar]
- D. M. Mukhammadiev, Dynamics of machine units of saw gin with seed retractor device and condenser with pulse air stream (Tashkent, 2014) [Google Scholar]
- Kh. A. Akhmedov, Development resourcesaving parts of saw gin with throwing drum (Tashkent, 2018) [Google Scholar]
- B. Kh. Primov, Substantiation of the parametres of the working chamber and transmission system of the saw gin with a peeling chamber (Tashkent, 2021) [Google Scholar]
- T. Saidkhodzhaev, Research on the influence of saw spacing on the ginning process (Tashkent, 1966) [Google Scholar]
- O. S. Mallaev, Substantiation of the design of a seed removal device for a saw gin with a peeling chamber (Tashkent, 2022) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.