EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 391 (2023) E3S Web Conf., 391 (2023) 01009 References
Open Access
Issue
E3S Web Conf.
Volume 391, 2023
4th International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED-ICMPC 2023)
Article Number 01009
Number of page(s) 13
DOI https://doi.org/10.1051/e3sconf/202339101009
Published online 05 June 2023
  1. Dursun, T. & Soutis, C. 56, 862–871 (2014). [Google Scholar]
  2. Burch, W., Dolega, E. & Kappelt, G. Bell laboratory report, Revision A (1962). [Google Scholar]
  3. Baleh, A. A. Contemp Eng Sci 11, 3409–3419 (2018). [CrossRef] [Google Scholar]
  4. Gavgali, M. & Aksakal, B. Materials Science and Engineering: A 254, 189–199 (1998). [CrossRef] [Google Scholar]
  5. Singh, S.K., Tambe, S.P., Raja, V.S., Kumar, D., Thermally sprayable polyethylene coatings for marine environment, Progress in Organic Coatings, 2007, 60(3), pp. 186–193. [CrossRef] [Google Scholar]
  6. Goel, M. D. et al. Materials & Design 42, 418–423 (2012). [CrossRef] [Google Scholar]
  7. Mahalle, G., Kotkunde, N., Gupta, A.K. et al. Microstructure Characteristics and Comparative Analysis of Constitutive Models for Flow Stress Prediction of Inconel 718 Alloy. J. of Materi Eng and Perform 28, 3320–3331 (2019). [CrossRef] [Google Scholar]
  8. Ashok, K., Maruthupandian, K., Ganesh Kumar, K. & Sundar Vishal, C. Transactions of the Indian Institute of Metals 68, 19–24 (2015). [CrossRef] [Google Scholar]
  9. Pandre, S., Kotkunde, N., Takalkar, P. et al. Flow Stress Behavior, Constitutive Modeling, and Microstructural Characteristics of DP 590 Steel at Elevated Temperatures. J. of Materi Eng and Perform 28, 7565–7581 (2019). [CrossRef] [Google Scholar]
  10. Li, P. Li, H., Huang, L., Liang, X. & Zhu, Z. Transactions of Nonferrous Metals Society of China 27, 1677–1688 (2017). [CrossRef] [Google Scholar]
  11. Sandeep Pandre, Ayush Morchhale, Nitin Kotkunde & Swadesh Kumar Singh (2020) Influence of processing temperature on formability of thin-rolled DP590 steel sheet, Materials and Manufacturing Processes, 35:8, 901–909 [CrossRef] [Google Scholar]
  12. Lade Jayahari, P.V. Sasidhar, P. Prudvi Reddy, B. BaluNaik, A.K. Gupta, Swadesh Kumar Singh, Formability studies of ASS 304 and evaluation of friction for Al in deep drawing setup at elevated temperatures using LS-DYNA, Journal of King Saud University - Engineering Sciences, Volume 26, Issue 1, 2014, Pages 21–31. [CrossRef] [Google Scholar]
  13. Shankar, M., Sokkalingam, R., Sivaprasad, K. & Muthupandi, V. in vol. 969 22–26 (Trans Tech Publ, 2019). [Google Scholar]
  14. Sundaram, J., Rajkumar, C., Prakash, J. U. & Salunke, vol. 2395 020007 (AIP Publishing LLC, 2021). [Google Scholar]
  15. Myhr, O., Grong, Ø., Fjær, H. & Marioara, C. Modelling of the micro structure and strength evolution in Al-Mg-Si alloys during multistage thermal processing. Acta Materialia 52, 4997–5008 (2004). [CrossRef] [Google Scholar]
  16. Yang, J., Sung, S., Chen, C. & Tan, A. Study of microstructural and mechanical properties of weld heat affected zones of 2024-T3 aluminium using Gleeble simulation. Materials Science and Technology 27, 357–365 (2011). [CrossRef] [Google Scholar]
  17. Pandouria, A. K. & Tiwari, V. I. Engineering Fracture Mechanics 109136 (2023). [CrossRef] [Google Scholar]
  18. Tummala, S.K., Indira Priyadarshini, T., Morphological Operations and Histogram Analysis of SEM Images using Python, Indian Journal of Engineering and Materials Sciences, 2022, 29(6), pp. 794–798. [Google Scholar]
  19. Narender, G., Shekar, K. C., Reddy, S. R., Ramjee, E. & Prasad, N. E. Transactions of the Indian National Academy of Engineering 6, 787–795 (2021). [CrossRef] [Google Scholar]
  20. Suresh Kumar Tummala, Phaneendra Babu Bobba & Kosaraju Satyanarayana (2022) SEM & EDAX analysis of super capacitor, Advances in Materials and Processing Technologies, 8:sup4, 2398–2409, [CrossRef] [Google Scholar]
  21. John, J., Shanmuganatan, S., Kiran, M., Senthil Kumar, V. & Krishnamurthy, R. Materials and Manufacturing Processes 34, 159–176 (2019). [CrossRef] [Google Scholar]
  22. Davu, S.R., Tejavathu, R. & Tummala, S.K. EDAX analysis of poly crystalline solar cell with silicon nitride coating. Int J Interact Des Manuf (2022). [Google Scholar]
  23. Sivaraman, P. Materials Today: Proceedings 37, 522–526 (2021). [CrossRef] [Google Scholar]
  24. Dwivedi, P., Siddiquee, A. N. & Maheshwari, S. Russian Journal of Non-Ferrous Metals 62, 212–225 (2021). [CrossRef] [Google Scholar]
  25. Pandouria, A. K., Yadav, K. & Tiwari, V. vol. 49 12–25 (Elsevier, 2023). [Google Scholar]
  26. Navya, G. et al. Mechanics of Solids 57, 590–596 (2022). [CrossRef] [Google Scholar]
  27. Ch, S., Madhusudhan, D. & Sravani, K. Int J Adv Mech Civil Eng 3, 79–83 (2016). [Google Scholar]
  28. Montgomery, D. C. Design and analysis of experiments. John Wiley & Sons. Inc., New York 1997, 200–201 (2001). [Google Scholar]
  29. Ross, P. J. Taguchi techniques for quality engineering: loss function, orthogonal experiments, parameter and tolerance design. (1988). [Google Scholar]
  30. B. J. Varghese and P. B. Bobba, “Design and analysis of a robust system for wirelessly powering implantable devices,” 2016 IEEE 1st International Conference on Power Electronics, Intelligent Control and Energy Systems (ICPEICES), Delhi, India, 2016, pp. 1–5, [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.