EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 391 (2023) E3S Web Conf., 391 (2023) 01010 References
Open Access
Issue
E3S Web Conf.
Volume 391, 2023
4th International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED-ICMPC 2023)
Article Number 01010
Number of page(s) 16
DOI https://doi.org/10.1051/e3sconf/202339101010
Published online 05 June 2023
  1. Jürgen Hirsch, Transactions of Nonferrous Metals Society of China, Volume 24, Issue 7, July 2014. [Google Scholar]
  2. Tolga Dursun, Costas Soutis, Materials & Design (1980-2015) Volume 56, April 2014. [Google Scholar]
  3. Rajiv S. Mishra, Harpreet Sidhar, Book-Physical Metallurgy of 2XXX Aluminium Alloys, Friction Stir Welding of 2XXX Aluminium Alloys Including Al-Li Alloys, 2017. [Google Scholar]
  4. B. J. Varghese and P. B. Bobba, “Design and analysis of a robust system for wirelessly powering implantable devices,” 2016 IEEE 1st International Conference on Power Electronics, Intelligent Control and Energy Systems (ICPEICES), Delhi, India, 2016, pp. 1–5, [Google Scholar]
  5. S. P. Ringer, T. Sakurap And I. J. Polmear, Acta Materialia, Volume 45, Issue 9, September 1997. [Google Scholar]
  6. M.A.M. Arif, M.Z. Omar Z. Sajuri, M.S. Salleh, Transactions of Nonferrous Metals Society of China, Volume 30, Issue 2, February 2020 [Google Scholar]
  7. Prasad, K.S., Gupta, A.K., Singh, Y., Singh, S.K., A Modified Mechanical Threshold Stress Constitutive Model for Austenitic Stainless Steels, Journal of Materials Engineering and Performance, 2016, 25(12), pp. 5411–5423 [CrossRef] [Google Scholar]
  8. Gang Chen, Tao Zhou Bo Wang, HoHong-WeiIU, Fei HAN Transactions of Nonferrous Metals Society of China, Volume 26, Issue 1, January 2016. [Google Scholar]
  9. Abass Ali Saleh, Contemporary Engineering Sciences, Vol. 11, 2018. [Google Scholar]
  10. Naik, R.B., Ratna, D., Singh, S.K., Synthesis and characterization of novel hyperbranched alkyd and isocyanate trimer based high solid polyurethane coatings, Progress in Organic Coatings, 2014, 77(2), pp. 369–379 [CrossRef] [Google Scholar]
  11. K. Ashok, K. Maruthupandian, K. Ganesh Kumar, C. Sundar Vishal, Transactions of the Indian Institute of Metals volume 68, pages19–24 (2015). [CrossRef] [Google Scholar]
  12. Anoop Kumar Pandouria, Kuldeep Yadav, Vikrant Tiwari, Structures, Volume 49, March 2023. [Google Scholar]
  13. Singh, S.K., Tambe, S.P., Raja, V.S., Kumar, D., Thermally sprayable polyethylene coatings for marine environment, Progress in Organic Coatings, 2007, 60(3), pp. 186–193. [CrossRef] [Google Scholar]
  14. Surajit Kumar Paul, The Journal Of Strain Analysis For Engineering Design, Volume 48 Issue 3, April 2013. [Google Scholar]
  15. Baloji Dharavath, Ayush Morchhale, Nitin Kotkunde, Swadesh Singh, Journal of Materials Engineering and Performance, Volume 29, July 2020. [Google Scholar]
  16. Sandeep Pandre, Ayush Morchhale, Nitin Kotkunde & Swadesh Kumar Singh (2020) Influence of processing temperature on formability of thin-rolled DP590 steel sheet, Materials and Manufacturing Processes, 35:8, 901–909 [CrossRef] [Google Scholar]
  17. Syed Mujahed Hussaini, Geetha Krishna, Amit Kumar Gupta, Swadesh Kumar Singh, Journal of Manufacturing Processes, Volume 18, April 2015. [Google Scholar]
  18. Xugang Wang, Xiaobo Fan, Xianshuo Chen, Shijian Yuan, Journal of Materials Processing Technology Volume 306, August 2022 [Google Scholar]
  19. Karthik Rao, R., Bobba, P.B., Suresh Kumar, T., Kosaraju, S., Feasibility analysis of different conducting and insulation materials used in laminated busbars, Materials Today: Proceedings, 2019, 26, pp. 3085–3089 [Google Scholar]
  20. Lade Jayahari, P.V. Sasidhar, P. Prudvi Reddy, B. BaluNaik, A.K. Gupta,Swadesh Kumar Singh, Formability studies of ASS 304 and evaluation of friction for Al in deep drawing setup at elevated temperatures using LS-DYNA, Journal of King Saud University - Engineering Sciences, Volume 26, Issue 1, 2014, Pages 21–31. [CrossRef] [Google Scholar]
  21. J. Pavan Kumar, R. Uday Kumar, B. Ramakrishna, B. Ramu and K. Baba Saheb 2nd International Conference on Advancements in Aeromechanical Materials for Manufacturing, volume 455, July 2018. [Google Scholar]
  22. Nejia Ayachi, Noamen Guermazi, Cong Hanh Pham. Metals 2020, 10(9), 116, August 2020. [Google Scholar]
  23. Tummala, S.K., Indira Priyadarshini, T., Morphological Operations and Histogram Analysis of SEM Images using Python, Indian Journal of Engineering and Materials Sciences, 2022, 29(6), pp. 794–798. [Google Scholar]
  24. L. Venugopal, M. J. Davidson & Material and manufacturing process, volume 28, issue 3, 2013. [Google Scholar]
  25. Suresh Kumar Tummala, Phaneendra Babu Bobba & Kosaraju Satyanarayana (2022) SEM & EDAX analysis of super capacitor, Advances in Materials and Processing Technologies, 8:sup4, 2398–2409 [CrossRef] [Google Scholar]
  26. Nitin Kotkunde, Amit Kumar Gupta, Prudvi Reddy Paresi, Swadesh Kumar Singh, Materials Today: Proceedings Volume 4, Issue 4, 2017. [Google Scholar]
  27. Lumelskyja, J. Rojeka, L. Lazarescub, D. Banabic, Procedia Manufacturing, Volume 27, 2019, [Google Scholar]
  28. B. J. Varghese, P. B. Bobba and M. Kavitha, “Effects of coil misalignment in a four coil implantable wireless power transfer system,” 2016 IEEE 7th Power India International Conference (PIICON), Bikaner, India, 2016, pp. 1–6 [Google Scholar]
  29. Sreenath D. Kumar, Amjith T.R., C. Anjaneyulu, Procedia Technology, Volume 24, 2016. [Google Scholar]
  30. J.J.S. Dilip, G.D. Janaki Ram, Materials Characterization, volume 86, December 2013 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.