EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 391 (2023) E3S Web Conf., 391 (2023) 01011 References
Open Access
Issue
E3S Web Conf.
Volume 391, 2023
4th International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED-ICMPC 2023)
Article Number 01011
Number of page(s) 10
DOI https://doi.org/10.1051/e3sconf/202339101011
Published online 05 June 2023
  1. Nair, A. R., & Vaidya, D. G. Vaidya. Procedía CIRP, 26, 127–130 (2015). [CrossRef] [Google Scholar]
  2. A. V. Patil, & S. M. Nalawade. Procedia Manufacturing, 8, 451–458 (2017). [Google Scholar]
  3. A. R. Nair, & D. G. Vaidya. International Journal of Manufacturing Technology and Management, 31(3-4), 194–222 (2017). [Google Scholar]
  4. M. Kavitha, P. B. Bobba and D. Prasad, “Effect of coil geometry and shielding on wireless power transfer system,” 2016 IEEE 7th Power India International Conference (PIICON), Bikaner, India, 2016, pp. 1–6, [Google Scholar]
  5. S. Rajesh, & N. Murugan. Materials Today: Proceedings, 5(2), 7384–7391 (2018). [Google Scholar]
  6. Karunakaran, & K. Ravichandran. IOP Conference Series: Materials Science and Engineering, 567(1), 012042 (2019). [CrossRef] [Google Scholar]
  7. Prasad, K.S., Gupta, A.K., Singh, Y., Singh, S.K., A Modified Mechanical Threshold Stress Constitutive Model for Austenitic Stainless Steels, Journal of Materials Engineering and Performance, 2016, 25(12), pp. 5411–5423 [CrossRef] [Google Scholar]
  8. S. Singh, G. Singh, & H. Singh. Materials Today: Proceedings, 22, 123–128 (2020). [Google Scholar]
  9. A. R. Nair, & D. G. Vaidya. Procedia Materials Science, 6, 1683–1692, (2014). [CrossRef] [Google Scholar]
  10. N. R. Dhar, & S. K. Pal. International Journal of Research in Engineering and Technology, 4(6), 192–197, (2015). [Google Scholar]
  11. Naik, R.B., Ratna, D., Singh, S.K., Synthesis and characterization of novel hyperbranched alkyd and isocyanate trimer based high solid polyurethane coatings, Progress in Organic Coatings, 2014, 77(2), pp. 369–379 [CrossRef] [Google Scholar]
  12. S. Dutta, & A. K. Dey. International Journal of Science and Research, 5(12), 1915–1920. [Google Scholar]
  13. Singh, S.K., Tambe, S.P., Raja, V.S., Kumar, D., Thermally sprayable polyethylene coatings for marine environment, Progress in Organic Coatings, 2007, 60(3), pp. 186–193. [CrossRef] [Google Scholar]
  14. A. K. Ojha, & A. R. Dixit. Materials Today: Proceedings, 5(10), 20979–20985, (2020). [Google Scholar]
  15. N. Agarwal, & H. Singh. Materials Today: Proceedings, 18, 1591–1596, (2020). [Google Scholar]
  16. Mahalle, G., Kotkunde, N., Gupta, A.K. et al. Microstructure Characteristics and Comparative Analysis of Constitutive Models for Flow Stress Prediction of Inconel 718 Alloy. J. of Materi Eng and Perform 28, 3320–3331 (2019). [CrossRef] [Google Scholar]
  17. S. K. Jha, & S. Singh. Materials Today: Proceedings, 22, 2292–2297, (2020). [Google Scholar]
  18. P. Kumar, & S. K. Choudhary. Materials Today: Proceedings, 22, 2285–2291, (2020). [Google Scholar]
  19. Pandre, S., Kotkunde, N., Takalkar, P. et al. Flow Stress Behavior, Constitutive Modeling, and Microstructural Characteristics of DP 590 Steel at Elevated Temperatures. J. of Materi Eng and Perform 28, 7565–7581 (2019). [CrossRef] [Google Scholar]
  20. A. Chauhan, & P. Kumar. Materials Today: Proceedings (2020). [Google Scholar]
  21. Sandeep Pandre, Ayush Morchhale, Nitin Kotkunde & Swadesh Kumar Singh (2020) Influence of processing temperature on formability of thin-rolled DP590 steel sheet, Materials and Manufacturing Processes, 35:8, 901–909 [CrossRef] [Google Scholar]
  22. S. Prabhu, & S. Sankar. Journal of Mechanical Science and Technology, 31(4), 1839–1851, (2017). [Google Scholar]
  23. S. Mondal, & P. Sahoo. International Journal of Machining and Machinability of Materials, 20(4), 319–341, (2018). [Google Scholar]
  24. Lade Jayahari, P.V. Sasidhar, P. Prudvi Reddy, B. BaluNaik, A.K. Gupta, Swadesh Kumar Singh, Formability studies of ASS 304 and evaluation of friction for Al in deep drawing setup at elevated temperatures using LS-DYNA, Journal of King Saud University - Engineering Sciences, Volume 26, Issue 1, 2014, Pages 21–31. [CrossRef] [Google Scholar]
  25. A. V. Patil, & S. M. Nalawade. International Journal of Research in Engineering and Technology, 7(1), 123–130, (2018). [CrossRef] [Google Scholar]
  26. Tummala, S.K., Indira Priyadarshini, T., Morphological Operations and Histogram Analysis of SEM Images using Python, Indian Journal of Engineering and Materials Sciences, 2022, 29(6), pp. 794–798. [Google Scholar]
  27. N. R. Dhar, & S. K. Pal. Materials Today: Proceedings, 5(2), 4185–4191, (2018). [Google Scholar]
  28. Mahapatra, S. S., & Mohanty, L. N. Journal of Mechanical Science and Technology, 34(9), 3761–3772, (2020). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.