EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 391 (2023) E3S Web Conf., 391 (2023) 01022 References
Open Access
Issue
E3S Web Conf.
Volume 391, 2023
4th International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED-ICMPC 2023)
Article Number 01022
Number of page(s) 8
DOI https://doi.org/10.1051/e3sconf/202339101022
Published online 05 June 2023
  1. Taktak, W., Taktak, R., Haddar, N., & Elleuch, R. (2017). Study of the influence of cold working on mechanical behavior and ductile fracture of 5754 aluminum alloy: experimental and numerical simulations. Journal of Theoretical and Applied Mechanics, 55(3), 923–935. (2017). [Google Scholar]
  2. Donati, L., Reggiani, B., Pelaccia, R., Negozio, M., & Di Donato, S. (2022). Advancements in extrusion and drawing: a review of the contributes by the ESAFORM community. International Journal of Material Forming, 15(3), 41. Onuh, S. O., Ekoja, M., & Adeyemi, M. B. Effects of die geometry and extrusion speed on the cold extrusion of aluminium and lead alloys. Journal of Materials Processing Technology, 132(1-3), 274-285. (2022). [CrossRef] [Google Scholar]
  3. Ozturk, F., Toros, S., & Pekel, H. (2009). Evaluation of tensile behaviour of 5754 aluminium-magnesium alloy at cold and warm temperatures. Materials Science and Technology, 25(7), 919–924. (2009). [CrossRef] [Google Scholar]
  4. Tiernan, P., Hillery, M. T., Draganescu, B., & Gheorghe, M. (2005). Modelling of cold extrusion with experimental verification. Journal of Materials Processing Technology, 168(2), 360–366. (2005). [CrossRef] [Google Scholar]
  5. Bay, N. (2022). Cold forming of aluminium—state of the art. Journal of Materials Processing Technology, 71(1), 76–90. (2022) [Google Scholar]
  6. Chaudhari, G. A., Andhale, S. R., & Patil, N. G. (2012). Experimental evaluation of effect of die angle on hardness and surface finish of cold forward extrusion of aluminium. International Journal of Emerging Technology and Advanced Engineering, 2(7), 334–338. (2012). [Google Scholar]
  7. Caminaga, C., da Silva Issii, R. L., & Button, S. T. (2006). Alternative lubrication and lubricants for the cold extrusion of steel parts. Journal of materials processing technology, 179(1-3), 87–91. (2006). [CrossRef] [Google Scholar]
  8. Syahrullail, S., Kamitani, S., & Nakanishi, K. (2012). Experimental evaluation of refined, bleached, and deodorized palm olein and palm stearin in cold extrusion of aluminum A1050. Tribology Transactions, 55(2), 199–209. (2012). [CrossRef] [Google Scholar]
  9. Syahrullail, S., Zubil, B. M., Azwadi, C. S. N., & Ridzuan, M. J. M. (2011). Experimental evaluation of palm oil as lubricant in cold forward extrusion process. International journal of mechanical sciences, 53(7), 549–555. (2011). [CrossRef] [Google Scholar]
  10. Yahaya, A., Samion, S., Ahyan, N. A. M., & Hamid, M. K. A. (2021). Cold extrusion using biodegradable oil as lubricant: Experimental and simulation analysis. Jurnal Tribologi, 30, 116.(2021). [Google Scholar]
  11. Teicher, U., Schulze, R., Brosius, A., & Nestler, A. (2018). The influence of brushing on the surface quality of aluminium. In MATEC Web of Conferences (Vol. 178, p. 01015). EDP Sciences. (2018). [CrossRef] [EDP Sciences] [Google Scholar]
  12. Leo, P., D'ostuni, S., & Casalino, G. (2018). Low temperature heat treatments of AA5754-Ti6Al4V dissimilar laser welds: Microstructure evolution and mechanical properties. Optics & Laser Technology, 100, 109.(2018). [CrossRef] [Google Scholar]
  13. Fuertes, J. P., Murillo, O., León, J., Luis, C., Salcedo, D., Puertas, I., & Luri, R. (2015). Mechanical properties analysis of an Al-Mg alloy connecting rod with submicrometric structure. Procedia engineering, 132, 313.(2015). [CrossRef] [Google Scholar]
  14. Ikumapayi, O. M., Oyinbo, S. T., Bodunde, O. P., Afolalu, S. A., Okokpujie, I. P., & Akinlabi, E. T. (2019). The effects of lubricants on temperature distribution of 6063 aluminium alloy during backward cup extrusion process. Journal of Materials Research and Technology, 8(1), 1175–1187. (2019). [CrossRef] [Google Scholar]
  15. Caminaga, C., da Silva Issii, R. L., & Button, S. T. (2006). Alternative lubrication and lubricants for the cold extrusion of steel parts. Journal of materials processing technology, 179(1-3), 87–91. (2006). [CrossRef] [Google Scholar]
  16. Snopiński, P., Tański, T., Golombek, K., Rusz, S., Hilser, O., Donič, T., … & Benedyk, M. (2020). Strengthening of AA5754 Aluminum Alloy by DRECE Process Followed by Annealing Response Investigation. Materials, 13(2), 301. (2020). [CrossRef] [PubMed] [Google Scholar]
  17. Qamar, S. Z. (2010). Shape complexity, metal flow, and dead metal zone in cold extrusion. Materials and Manufacturing Processes, 25(12), 1454–1461. (2010). [CrossRef] [Google Scholar]
  18. Kumar, A. V., Ratnam, C. H., Rao, V. K., & Kumar, C. R. (2019). Study on influence of die angle in cold extrusion on properties of nano sic reinforced 6061 aluminum alloy. Materials Today: Proceedings, 18, 4366.(2019). [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.