EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 391 (2023) E3S Web Conf., 391 (2023) 01050 References
Open Access
Issue
E3S Web Conf.
Volume 391, 2023
4th International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED-ICMPC 2023)
Article Number 01050
Number of page(s) 11
DOI https://doi.org/10.1051/e3sconf/202339101050
Published online 05 June 2023
  1. N. Baltzer & T. Copponnex. Precious metals for biomedical applications. Elsevier.12:222–333 (2014). [Google Scholar]
  2. B. L. Karihaloo, W.G. Knauss. (2003). Fundamental theories and mechanisms of failure. [Google Scholar]
  3. M. A. Bodude & I. Momohjimoh. Journal of Minerals and Materials Characterization and Engineering, 3 (03) 142.(2022) [Google Scholar]
  4. I. A. Syarul, I. Amira, and A. Ghaliba. Procedia Engineering 41–1497. (2012) [Google Scholar]
  5. Chen, L., Liu, H., Qi, H., & J. Chen, J. High-electromechanical performance for high-power piezoelectric applications: fundamental, progress, and perspective. Progress in Materials Science, 100944. (2022) [CrossRef] [Google Scholar]
  6. D. H. Kim, M. Moallemi, K. S. Kim, H. J. Cho, & S.J. Kim (2023). Correlation between grain size variation and hydrogen embrittlement in a costeffective Fe40Mn40Ni10Cr10 austenitic medium entropy alloy. International Journal of Hydrogen Energy, 48(14), 5708–5717 (2023). [CrossRef] [Google Scholar]
  7. S. G. Shiri, M. Nazarzadeh, M. Sharifitabar & M.S. Afarani. Transactions of Nonferrous Metals Society of China, 22; 2937. (2012) [CrossRef] [Google Scholar]
  8. M. Erinosho, E. Akinlabi & Ogundimu, Emmanuel. Surface Review and Letters. 25 (2017). [Google Scholar]
  9. I. A. Zhenzhurist. Sintering in a microwave field is a promising ecological technology for producing nanostructured ceramic composites from natural raw materials. In IOP Conference Series: Materials Science and Engineering (Vol. 976, No. 1, p. 012008). IOP Publishing.(2020) [Google Scholar]
  10. I.G. Crouch, S. J. Cimpoeru, H. Li, & D. Shanmugam. Armour steels. In The science of armour materials (pp. 55–115). Woodhead Publishing. (2017) [CrossRef] [Google Scholar]
  11. K. Moiduddin, A.N. Siddiquee, M.H. Abidi, S.H. Mian. & M.K. Mohammed, M.K. (2022). A study on grain size variation across thick section friction stir weldments. Materials Today: Proceedings, 62, 1–4. [CrossRef] [Google Scholar]
  12. A. Nnnnn L. Akbari-Mousavi, T.S. Barrett, TIG And MIG Analysis And Its Application. Al-HASSANI. Journal of Materials Processing Technology, 202 (2008) 224. [CrossRef] [Google Scholar]
  13. S. A. Mohamata, I. A. Ibrahima, A. Amira, A. Ghaliba. Procedia Engineering 41: 1497 (2012) [CrossRef] [Google Scholar]
  14. K. Mariappan, A. Nagesha, M. Vasudevan, & A.K. Bhaduri. Characterization of the cyclic deformation behavior of simulated HAZs and other constituent microstructural regions of P91 steel weldment. International Journal of Fatigue, 164, 107118.(2022) [CrossRef] [Google Scholar]
  15. L. Zhong, J. Tang, R. Yang, H. Yan, Q. Cai, & T. Zhou. Changing the grain size of FeSiAl powders to improve corrosion resistance and wave absorbing property. Journal of Magnetism and Magnetic Materials, 558, 169524.(2022) [CrossRef] [Google Scholar]
  16. M. Gsellmann, D. Scheiber, T. Klünsner, J. Zálesák, Z. Zhang, H. Leitner & L. Romaner. Bond strength between TiN coating and microstructural constituents of a high speed steel determined by first principle calculations. Acta Materialia, 222, 117439.(2022) [CrossRef] [Google Scholar]
  17. A. Altarazi, L. Hijazi, & E. Kaiser. IEEE International Conference on industrial engineering and engineering management (IEEM) 1041 (2022) [Google Scholar]
  18. M. Gsellmann, T. Klünsner, C. Mitterer, M. Krobath, M. Wurmshuber, H. Leitner, & G. Ressel. Strength ranking for interfaces between a TiN hard coating and microstructural constituents of high speed steel determined by micromechanical testing. Materials & Design, 204, 109690.(2021) [CrossRef] [Google Scholar]
  19. A. N. Karpagaraj, N. Rajesh-Kumar, N. Thiyaneshwaran, S. Shanmugam, M. Cheepu, and R. Sarala. Journal of the Brazilian Society of Mechanical Sciences and Engineering 42–100 (2020). [Google Scholar]
  20. X. Dong, X.Y. Shen, Improving mechanical properties and corrosion resistance of 0.5 wt.% C TRIP steel by adjusting retained austenite stability and microstructural constituents. Materials Science and Engineering: A, 852, 143737 (2022). [CrossRef] [Google Scholar]
  21. X. Tan, L. Fan, Y. Huang, & Y. Bao. Detection, visualization, quantification, and warning of pipe corrosion using distributed fiber optic sensors. Automation in Construction, 132 (2021), 103953. [CrossRef] [Google Scholar]
  22. M. Sezhian, R. Vetrivel, K. Ramadoss, G. Giridharan, G. Chakravarthi, and B. Stalin. Materials Today: Proceedings 33 (2020) 4842 [CrossRef] [Google Scholar]
  23. L. Babu, K.A. Mozumder, Y.H. Athreya, C.N. Sarma, V.S. Mandal, Implication of initial grain size on DRX mechanism and grain refinement in super- 304H SS in a wide range of strain rates during large-strain hot deformation. Materials Science and Engineering: A, 832, 142269. (2020) [Google Scholar]
  24. A. K. Biradar, M. M. Akarate and S. Ram Reddy. International J. of Math. Sci. & Engg. Appls. (IJMSEA). 3–33.(2009) [Google Scholar]
  25. S. Quan, R. Song, S. Su, Y. Huang, C. Cai, Y. Wang, & K. Wang. Grain boundary engineering prepared by iterative thermomechanical processing of nickel-saving austenitic stainless steel: Excellent corrosion resistance and mechanical properties. Materials Characterization, 196 (2023), 112601. [CrossRef] [Google Scholar]
  26. Z. Hu, L. Hua, X. Qin, M. Ni, F. Ji & M. Wu. Journal of Manufacturing Processes 64 1359. (2001) [Google Scholar]
  27. J. D. Majumdar. Journal of Naval Architecture and Marine Engineering, 3: 38. (2008) [Google Scholar]
  28. H. Ding, G. Zhu, Q. Chen, Y. Wang, & X. Wang. Mechanism of boundary induced transformation and its application in the grain refinement of large-size structural steels. Materials Science and Engineering: A, 818, 141342.(2021) [CrossRef] [Google Scholar]
  29. F. O. Obi, B. O. Ugwuishiwu and J. N. Nwakaire. Nigerian Journal of Technology (NIJOTECH). 35 (16) 957.(2022) [Google Scholar]
  30. Y. Wang, T. Yang, Q. Lu, K. Li, Z. Wang, Z.Y. Du. Grain size refinement and enhanced precipitation strengthening in a hot extruded 6xxx Al alloy without homogenization. Materials Characterization, 198, 112718.(2023) [CrossRef] [Google Scholar]
  31. M. M. H. Mmmm, H. Abadi and M. Pouranvari. Mediterranean Journal of Materials. 16: 16.(2010) [Google Scholar]
  32. P. Podrzaj, S. Simončič. Int J Adv Manuf Technol 52, 959. 00170-010-2794 (2011) [CrossRef] [Google Scholar]
  33. R. Thulasiram, S. Mani, N. Ramaswamy & M. Murugesan (2021). Grain size refinement, texture analysis and effect on the tensile properties of a novel Inconel 718. Materials Letters, 292, 129633.(2012) [CrossRef] [Google Scholar]
  34. S. Karna, M. Cheepu, D. Venkateswarulu, & V. Srikanth. IOP Conference Series: Materials Science and Engineering. 330-012068.(2018) [Google Scholar]
  35. L. Peral, P. Ebrahimzadeh, A. Gutiérrez, & I. Fernández-Pariente. (20. Effect of tempering temperature and grain refinement induced by severe shot peening on the corrosion behavior of a low alloy steel. Journal of Electroanalytical Chemistry, 932, 117207.(2023) [CrossRef] [Google Scholar]
  36. S. A. Afolalu, O. D. Samuel and O. M. Ikumapayi. Journal of Materials Research and Technology. 9 (2020) 9232. [CrossRef] [Google Scholar]
  37. N. S. Prakash S. Mandal, S. Mandal, D. Chakrabarti & M. Roy. Implication of Nano-Scale Grain Refinement on the Passive Film Formation and Corrosion Response of AISI 301L Steel with and without Pre-Existing Martensite. Materials Letters, 133836.(2023). [Google Scholar]
  38. Q. I. Jin, L.I. Zhi, D.Q. Yi, & W.A.N.G. Bin. Diversity of intergranular corrosion and stress corrosion 22-10 (2019) [Google Scholar]
  39. G. Y. Yang, Y. Du, S. Chen & Y. Ren. Effect of grain size on corrosion behavior of 304 stainless steel in coal chemical high salty wastewater. Materials Today Communications, 105407.(2023) [CrossRef] [Google Scholar]
  40. S. A. Afolalu, O. M. Ikumapayi, T. S. Ogedengbe, M. E. Emetere. Revue des Composites et des Matériaux Avancés-Journal of Composite and Advanced Materials. 31:153.(2021). [Google Scholar]
  41. W. Zhang, F. Liu, L. Liu, Q. Li, L. Liu, F. Liu, & C. Huang. Effect of grain size and distribution on the corrosion behavior of Y2O3 dispersion-strengthened 304 stainless steel. Materials Today Communications, 31, 103723. (2023) [Google Scholar]
  42. X. Luo, Y. Wei, J. Shen, N. Ma, & C.J. Li. Breaking the tradeoff between corrosion resistance and fatigue lifetime of the coated Mg alloy through cold spraying submicron-grain Al alloy coatings. Journal of Magnesium and Alloys. 30-100-68 (2023) [Google Scholar]
  43. M. Soleimani, H. Mirzadeh, C. Dehghanian. (2020). Effect of grain size on the corrosion resistance of low carbon steel. Materials Research Express, 7(1), 016522. [CrossRef] [Google Scholar]
  44. L. Sharma, R. Chhibber. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 233–739. 9 (2019) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.