Open Access
Issue
E3S Web of Conf.
Volume 396, 2023
The 11th International Conference on Indoor Air Quality, Ventilation & Energy Conservation in Buildings (IAQVEC2023)
Article Number 01012
Number of page(s) 4
Section Indoor Environmental Quality (IEQ), Human Health, Comfort and Productivity
DOI https://doi.org/10.1051/e3sconf/202339601012
Published online 16 June 2023
  1. United States Environmental Protection Agency (EPA), Introduction to Indoor Air Quality. https://www.epa.gov/indoor-air-quality-iaq/introduction-indoor-airquality. [Google Scholar]
  2. Tran, V.V., D. Park, and Y.-C. Lee, Indoor Air Pollution, Related Human Diseases, and Recent Trends in the Control and Improvement of Indoor Air Quality. International journal of environmental research and public health, 2020. 17(8): p. 2927. [CrossRef] [PubMed] [Google Scholar]
  3. Cakmak, S., R.E. Dales, L. Liu, L.M. Kauri, et al., Residential exposure to volatile organic compounds and lung function: Results from a population-based cross-sectional survey. Environmental Pollution, 2014. 194: p. 145-151. [CrossRef] [Google Scholar]
  4. Malayeri, M., M. Bahri, F. Haghighat, and A. Shah, Impact of air distribution on indoor formaldehyde abatement with/without passive removal material: A CFD modeling. Building and Environment, 2022. 212: p. 108792. [CrossRef] [Google Scholar]
  5. Malayeri, M., F. Haghighat, and C.-S. Lee, Modeling of volatile organic compounds degradation by photocatalytic oxidation reactor in indoor air: A review. Building and Environment, 2019. 154: p. 309-323. [CrossRef] [Google Scholar]
  6. Malayeri, M., F. Haghighat, and C.-S. Lee, Kinetic modeling of the photocatalytic degradation of methyl ethyl ketone in air for a continuous-flow reactor. Chemical Engineering Journal, 2021. 404: p. 126602. [CrossRef] [Google Scholar]
  7. Malayeri, M., C.-S. Lee, F. Haghighat, and L. Klimes, Modeling of gas-phase heterogeneous photocatalytic oxidation reactor in the presence of mass transfer limitation and axial dispersion. Chemical Engineering Journal, 2020. 386: p. 124013. [CrossRef] [Google Scholar]
  8. Whyte, H.E., A. Subrenat, C. Raillard, and V. Héquet, Understanding the influence of media geometry on the degradation of acrylonitrile: Experimental and CFD analysis. Chemical Engineering Science, 2019. 209: p. 115217. [CrossRef] [Google Scholar]
  9. Palau, J., A.A. Assadi, J.M. Penya-roja, A. Bouzaza, et al., Isovaleraldehyde degradation using UV photocatalytic and dielectric barrier discharge reactors, and their combinations. Journal of Photochemistry and Photobiology A: Chemistry, 2015. 299: p. 110-117. [CrossRef] [Google Scholar]
  10. Abidi, M., A. Hajjaji, A. Bouzaza, L. Lamaa, et al., Modeling of indoor air treatment using an innovative photocatalytic luminous textile: Reactor compactness and mass transfer enhancement. Chemical Engineering Journal, 2022. 430: p. 132636. [CrossRef] [Google Scholar]
  11. Lopes, F.V., R.A. Monteiro, A.M. Silva, G.V. Silva, et al., Insights into UV-TiO2 photocatalytic degradation of PCE for air decontamination systems. Chemical Engineering Journal, 2012. 204: p. 244-257. [CrossRef] [Google Scholar]
  12. Malayeri, M., C.-S. Lee, J. Niu, J. Zhu, et al., Kinetic and reaction mechanism of generated by-products in a photocatalytic oxidation reactor: Model development and validation. Journal of Hazardous Materials, 2021: p. 126411. [Google Scholar]
  13. Malayeri, M., C.-S. Lee, J. Niu, J. Zhu, et al., Kinetic modeling and reaction mechanism of toluene and by-products in photocatalytic oxidation reactor. Chemical Engineering Journal, 2022. 427: p. 131536. [CrossRef] [Google Scholar]
  14. Malayeri, M., J. Zhu, J. Niu, C.-S. Lee, et al., Kinetic modeling of binary mixture of butyraldehyde and acetone with generated byproducts in photocatalytic oxidation reactor. Chemical Engineering Journal, 2022. 443: p. 136457. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.