EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 396 (2023) E3S Web of Conf., 396 (2023) 03032 References
Open Access
Issue
E3S Web of Conf.
Volume 396, 2023
The 11th International Conference on Indoor Air Quality, Ventilation & Energy Conservation in Buildings (IAQVEC2023)
Article Number 03032
Number of page(s) 6
Section Energy Efficient and Healthy HVAC systems
DOI https://doi.org/10.1051/e3sconf/202339603032
Published online 16 June 2023
  1. L. Pérez-Lombard, J. Ortiz, and C. Pout, “A review on buildings energy consumption information,” Energy Build., vol. 40, no. 3, pp. 394–398, 2008. [Google Scholar]
  2. I. Ait Laasri, A. Outzourhit, and M. O. Mghazli, “Multi-parameter analysis of different building forms in a semi-arid climate: Effect of building construction and phase change materials,” Sol. Energy, vol. 250, pp. 220–240, 2023. [CrossRef] [Google Scholar]
  3. H. Lidoh, B. Ikken, and S. I. Kaitouni, “Thermal Performance of a Hemp Concrete Residential Building Envelope in Tangier-Morocco,” in 2018 6th International Renewable and Sustainable Energy Conference (IRSEC), 2018, pp. 1–8. [Google Scholar]
  4. I. Ait Laasri, N. Es-sakali, A. Outzourhit, and M. O. Mghazli, “Numerical building energy simulation with phase change materials including hysteresis effect for different square building cases in a semi-arid climate,” in 2022 13th International Renewable Energy Congress (IREC), 2022, pp. 1–4. doi: 10.1109/IREC56325.2022.10002008. [Google Scholar]
  5. S. El Kadiri, S. I. Kaitouni, B. Ikken, and R. El Otmani, “Thermal performance of a residential building in Ben Guerir City: A comparative evaluation for an optimized thermal load needs,” in 2018 6th international renewable and sustainable energy conference (IRSEC), 2018, pp. 1–8. [Google Scholar]
  6. N. A. Kurekci, “Determination of optimum insulation thickness for building walls by using heating and cooling degree-day values of all Turkey’s provincial centers,” Energy Build., vol. 118, pp. 197–213, 2016. [CrossRef] [Google Scholar]
  7. M. Gustafsson et al., “Energy performance comparison of three innovative HVAC systems for renovation through dynamic simulation,” Energy Build., vol. 82, pp. 512–519, 2014. [CrossRef] [Google Scholar]
  8. N. Es-sakali, M. Cherkaoui, M. O. Mghazli, and Z. Naimi, “Review of predictive maintenance algorithms applied to HVAC systems,” Energy Reports, vol. 8, pp. 1003–1012, 2022. [CrossRef] [Google Scholar]
  9. F. Jazizadeh, A. Ghahramani, B. Becerik-Gerber, T. Kichkaylo, and M. Orosz, “User-led decentralized thermal comfort driven HVAC operations for improved efficiency in office buildings,” Energy Build., vol. 70, pp. 398–410, 2014. [CrossRef] [Google Scholar]
  10. W. W. Che et al., “Energy consumption, indoor thermal comfort and air quality in a commercial office with retrofitted heat, ventilation and air conditioning (HVAC) system,” Energy Build., vol. 201, pp. 202–215, 2019. [CrossRef] [Google Scholar]
  11. N. Es-sakali, S. I. Kaitouni, I. Ait Laasri, M. O. Mghazli, M. Cherkaoui, and J. Pfafferott, “Assessment of the energy efficiency for a building energy model using different glazing windows in a semi-arid climate,” in 2022 13th International Renewable Energy Congress (IREC), 2022, pp. 1–5. doi: 10.1109/IREC56325.2022.10001934. [Google Scholar]
  12. Y. Wang, J. Kuckelkorn, F.-Y. Zhao, D. Liu, A. Kirschbaum, and J.-L. Zhang, “Evaluation on classroom thermal comfort and energy performance of passive school building by optimizing HVAC control systems,” Build. Environ., vol. 89, pp. 86–106, 2015. [CrossRef] [Google Scholar]
  13. H. A. Gilani, S. Hoseinzadeh, H. Karimi, A. Karimi, A. Hassanzadeh, and D. A. Garcia, “Performance analysis of integrated solar heat pump VRF system for the low energy building in Mediterranean island,” Renew. Energy, vol. 174, pp. 1006–1019, 2021. [CrossRef] [Google Scholar]
  14. W. Liang, R. Quinte, X. Jia, and J.-Q. Sun, “MPC control for improving energy efficiency of a building air handler for multi-zone VAVs,” Build. Environ., vol. 92, pp. 256–268, 2015. [CrossRef] [Google Scholar]
  15. C. Jiang et al., “Experimental investigation on an energy-efficient floor heating system with intelligent control: A case study in Chengdu, China,” Case Stud. Therm. Eng., vol. 26, p. 101094, 2021. [CrossRef] [Google Scholar]
  16. Q. Chen, N. Li, and W. Feng, “Model predictive control optimization for rapid response and energy efficiency based on the state-space model of a radiant floor heating system,” Energy Build., vol. 238, p. 110832, 2021. [CrossRef] [Google Scholar]
  17. J. Zhou, X. Ma, X. Zhao, Y. Yuan, M. Yu, and J. Li, “Numerical simulation and experimental validation of a micro-channel PV/T modules based direct-expansion solar heat pump system,” Renew. Energy, vol. 145, pp. 1992–2004, 2020. [CrossRef] [Google Scholar]
  18. V. Vakiloroaya, J. G. Zhu, and Q. P. Ha, “Modelling and optimization of direct expansion air conditioning system for commercial building energy saving,” 2011. [Google Scholar]
  19. X. Chen, H. Yang, and K. Sun, “A holistic passive design approach to optimize indoor environmental quality of a typical residential building in Hong Kong,” Energy, vol. 113, pp. 267–281, 2016. [CrossRef] [Google Scholar]
  20. W. Yu, B. Li, H. Jia, M. Zhang, and D. Wang, “Application of multi-objective genetic algorithm to optimize energy efficiency and thermal comfort in building design,” Energy Build., vol. 88, pp. 135–143, 2015. [CrossRef] [Google Scholar]
  21. B. Chegari, M. Tabaa, E. Simeu, F. Moutaouakkil, and H. Medromi, “Multi-objective optimization of building energy performance and indoor thermal comfort by combining artificial neural networks and metaheuristic algorithms,” Energy Build., vol. 239, p. 110839, 2021. [CrossRef] [Google Scholar]
  22. S. Gou, V. M. Nik, J.-L. Scartezzini, Q. Zhao, and Z. Li, “Passive design optimization of newly-built residential buildings in Shanghai for improving indoor thermal comfort while reducing building energy demand,” Energy Build., vol. 169, pp. 484–506, 2018. [CrossRef] [Google Scholar]
  23. E. Naderi, B. Sajadi, M. A. Behabadi, and E. Naderi, “Multi-objective simulation-based optimization of controlled blind specifications to reduce energy consumption, and thermal and visual discomfort: Case studies in Iran,” Build. Environ., vol. 169, p. 106570, 2020. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.