Open Access
Issue
E3S Web Conf.
Volume 399, 2023
International Conference on Newer Engineering Concepts and Technology (ICONNECT-2023)
Article Number 03018
Number of page(s) 12
Section Material Science
DOI https://doi.org/10.1051/e3sconf/202339903018
Published online 12 July 2023
  1. Madera Sierra I.E., Losanno D., Strano S., Marulanda J., Thomson P., Development and experimental behavior of HDR seismic isolators for low-rise residential buildings, Eng Struct, 183, pp. 894–906 (2019) [CrossRef] [Google Scholar]
  2. Dhanya J.S., Boominathan A., Banerjee S., Response of low-rise building with geotechnical seismic isolation system, Soil Dynamics and Earthquake Engineering, 136, pp. 106187 (2020) [CrossRef] [Google Scholar]
  3. Calabrese A., Losanno D., Spizzuoco M., Strano S., Terzo M., Recycled Rubber Fiber Reinforced Bearings (RR-FRBs) as base isolators for residential buildings in developing countries: The demonstration building of Pasir Badak, Indonesia, Eng Struct, 192, pp. 126–144 (2019) [CrossRef] [Google Scholar]
  4. Markou A.A., Stefanou G., Manolis G.D., Stochastic response of structures with hybrid base isolation systems, Eng Struct, 172, pp. 629–643 (2018) [CrossRef] [Google Scholar]
  5. Casagrande L., Villa E., Nespoli A., Occhiuzzi A., Bonati A., Auricchio F., Innovative dampers as floor isolation systems for seismically-retrofit multi-storey critical facilities, Eng Struct, 201, pp. 109772 (2019) [CrossRef] [Google Scholar]
  6. Clemente P., Bongiovanni G., Buffarini G., Saitta F., Castellano M.G., Scafati F., Effectiveness of HDRB isolation systems under low energy earthquakes Soil Dynamics and Earthquake Engineering, 118, pp. 207–220 (2019) [Google Scholar]
  7. De Domenico D., Gandelli E., Quaglini V., Effective base isolation combining low-friction curved surface sliders and hysteretic gap dampers, Soil Dynamics and Earthquake Engineering, 130, pp. 105989 (2020) [CrossRef] [Google Scholar]
  8. Cancellara D., De Angelis F., A base isolation system for structures subject to extreme seismic events characterized by anomalous values of intensity and frequency content, Compos Struct, 157, pp. 285–302 (2016) [CrossRef] [Google Scholar]
  9. Mazza F., Mazza M., Vulcano A., Base-isolation systems for the seismic retrofitting of r.c. framed buildings with soft-storey subjected to near-fault earthquakes, Soil Dynamics and Earthquake Engineering, 109, pp. 209–221 (2018) [CrossRef] [Google Scholar]
  10. Ostrovskaya N., Rutman Y., Optimum control of energy dissipation in supportpendulum seismic isolation system for large NPP equipment, Procedia Structural Integrity, 6, pp. 19–26 (2017) [CrossRef] [Google Scholar]
  11. Calabrese A., Spizzuoco M., Galano S., Tran N., Strano S., Terzo M., A parametric study on the stability of fiber reinforced rubber bearings under combined axial and shear loads, Eng Struct, 227, pp. 111441 (2021) [CrossRef] [Google Scholar]
  12. Tran C., Calabrese A., Vassiliou M.F., Galano S., A simple strategy to tune the lateral response of unbonded Fiber Reinforced Elastomeric Isolators (FREIs), Eng Struct, 222, pp. 111128 (2020) [CrossRef] [Google Scholar]
  13. Castillo Ruano P., Strauss A., An experimental study on unbonded circular fiber reinforced elastomeric bearings, Eng Struct, 177, pp. 72–84 (2018) [CrossRef] [Google Scholar]
  14. Khaloo A., Maghsoudi-Barmi A., Ehteshami Moeini M., Numerical parametric investigation of hysteretic behavior of steel-reinforced elastomeric bearings under large shear deformation, Structures, 26, pp. 456–470 (2020) [Google Scholar]
  15. Kalfas K.N., Mitoulis S.A., Performance of steel-laminated rubber bearings subjected to combinations of axial loads and shear strains, Procedia Eng, 199, pp. 2979–2984 (2017) [CrossRef] [Google Scholar]
  16. Rahnavard R., Craveiro H.D., Napolitano R., Static and dynamic stability analysis of a steel-rubber isolator with rubber cores, Structures, 26, pp. 441–455 (2020) [Google Scholar]
  17. Morelli F., Piscini A., Salvatore W., Seismic behavior of an industrial steel structure retrofitted with self-centering hysteretic dampers, J Constr Steel Res, 139, pp. 157–175 (2017) [CrossRef] [Google Scholar]
  18. Losanno D., Madera Sierra I.E., Spizzuoco M., Marulanda J., Thomson P., Experimental assessment and analytical modeling of novel fiber-reinforced isolators in unbounded configuration, Compos Struct, 212, pp. 66–82 (2019) [CrossRef] [Google Scholar]
  19. AlMusbahi S., Güngör A., A composite building isolation system for earthquake protection, Engineering Science and Technology, an International Journal, 22, pp. 399–404 (2019) [CrossRef] [Google Scholar]
  20. Maureira-Carsalade N., Pardo E., Oyarzo-Vera C., Roco A., A roller type base isolation device with tensile strength, Eng Struct, 221, pp. 111003 (2020) [CrossRef] [Google Scholar]
  21. Milanchian R., Hosseini M., Study of vertical seismic isolation technique with nonlinear viscous dampers for lateral response reduction Journal of Building Engineering, 23, pp. 144–154 (2019) [CrossRef] [Google Scholar]
  22. Cancellata Ds, De Angelis, F., Dynamic assessment of base isolation systems for irregular in plan structures: Response spectrum analysis vs nonlinear analysis, Compos Struct, 215, pp. 98–115 (2019) [CrossRef] [Google Scholar]
  23. Shoaei P., Tahmasebi Orimi H., Zahrai S.M., Seismic reliability-based design of inelastic base-isolated structures with lead-rubber bearing systems, Soil Dynamics and Earthquake Engineering, 115, pp. 589–605 (2018) [CrossRef] [Google Scholar]
  24. Shinozuka M., Chaudhuri S.R., Mishra S.K. Shape-Memory-Alloy supplemented Lead Rubber Bearing (SMA-LRB) for seismic isolation, Probabilistic Engineering Mechanics, 41, pp. 34–45 (2015) [CrossRef] [Google Scholar]
  25. De Domenico D., Ricciardi G., Earthquake-resilient design of base isolated buildings with TMD at basement: Application to a case study, Soil Dynamics and Earthquake Engineering, 113, pp. 503–521 (2018) [CrossRef] [Google Scholar]
  26. Yang Y., Pan G., Yin S., Yuan Y., Experiment Investigate on the Effectiveness of Flexible Pipes to Isolate Sea-Water Pump Generated, Vibration Coatings, 10, pp. 43 (2020) [CrossRef] [Google Scholar]
  27. Deringöl A.H., Güneyisi E.M. Single and combined use of friction-damped and base-isolated systems in ordinary buildings, J Constr Steel Res, 174, pp. 106308 (2020) [CrossRef] [Google Scholar]
  28. Gur S., Mishra S.K., Multi-objective stochastic-structural-optimization of shapememory-alloy assisted pure-friction bearing for isolating building against random earthquakes, Soil Dynamics and Earthquake Engineering, 54, pp. 1–16 (2013) [CrossRef] [Google Scholar]
  29. Bhowmick S., Mishra S.K., Ferrous SMA (FNCATB) based Superelastic Friction Bearing Isolator (S-FBI) subjected to pulse type ground motions, Soil Dynamics and Earthquake Engineering, 100, pp. 34–48 (2017) [CrossRef] [Google Scholar]
  30. Ahmadipour M., Alam M.S., Sensitivity analysis on mechanical characteristics of lead-core steel-reinforced elastomeric bearings under cyclic loading, Eng Struct, 140, pp. 39–50 (2017) [CrossRef] [Google Scholar]
  31. Govardhan, Paul D.K. Effect of Lead in Elastomeric Bearings for Structures Located in Seismic Region, Procedia Technology, 25, pp. 146–153 (2016) [CrossRef] [Google Scholar]
  32. Turer A., Özden B., Seismic base isolation using low-cost Scrap Tire Pads (STP), Mater Struct, 41, pp. 891–908 (2008) [CrossRef] [Google Scholar]
  33. Calabrese A., Losanno D., Barjani A., Spizzuoco M., Strano S., Effects of the longterm aging of glass-fiber reinforced bearings (FRBs) on the seismic response of a base-isolated residential building, Eng Struct, 221, pp. 110735 (2020) [CrossRef] [Google Scholar]
  34. Mordini A., Strauss A., An innovative earthquake isolation system using fibre reinforced rubber bearings, Eng Struct, 30, pp. 2739–2751 (2008) [CrossRef] [Google Scholar]
  35. Cancellara D., De Angelis F., Assessment and dynamic nonlinear analysis of different base isolation systems for a multi-storey RC building irregular in plan, Comput Struct, 180, pp. 74–88 (2017) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.