Open Access
Issue |
E3S Web of Conf.
Volume 401, 2023
V International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2023)
|
|
---|---|---|
Article Number | 01060 | |
Number of page(s) | 9 | |
Section | Hydraulics of Structures, Hydraulic Engineering and Land Reclamation Construction | |
DOI | https://doi.org/10.1051/e3sconf/202340101060 | |
Published online | 11 July 2023 |
- Babilius V. V., Motskaitis I. I., Zhelnis M. V. / Carburizing and desulfurization of SCI smelted in industrial frequency furnaces. / / Foundry Production, 1968. [Google Scholar]
- Shumikhin V. S., Luzan P. P., Zhelnis M. S. / “Melting of SCI in induction furnaces and its technology at the Kaunas foundry” Centrolit”, / / Vilnius, Mintis, 1974, 297 p. [Google Scholar]
- Turakulov M. R., Tursunov N. K.,Alimukhamedov Sh. P., Toirov O. T., Razrabotka effektivnoi tekhnologii polucheniya sinteticheskogo chuguna v inductsionnoi tigel'noi pechi [Development of an effective technology for producing SCI in an induction crucible furnace]Universum. scientific. Zhurnal. 2022. 6 (99). [Google Scholar]
- Kukartsev V. A. et al. Increasing the Efficiency of Production of SCI Castings //Key Engineering Materials. – Trans Tech Publications Ltd, 2021. –Т. 904. –C. 3-8. [Google Scholar]
- Futas P. et al. The study of SCI quality made from steel scrap //International multidisciplinary Scientific Geo Conference surveying geology and mining ecology management. – 2018. –Т. 18. –C. 321-329. [Google Scholar]
- Medyński D., Janus A. EffectofCr,Mo andAl on Structure andSelected Mechanical Properties of Austenitic Cast Iron //Archives of Foundry Engineering. – 2019. [Google Scholar]
- Futáš P. et al. The GIST of thermal stresses of cast iron castings //Manufacturing technology. 2013, vol.13, no. 2, pp.173-178. [Google Scholar]
- Riposan I., Chisamera M., Stan S. / Enhanced quality in electric melt grey cast irons // ISIJ international. – 2013. –T. 53. –№.10. –C. 1683-1695. [CrossRef] [Google Scholar]
- Akhat T Djanikulov, Sherali I Mamayev, and Obidjon T Kasimov, “Modeling of rotational oscillations in a diesel locomotive wheel-motorblock”,JournalofPhysics: Conference Series 1889 (2021) 022017. [CrossRef] [Google Scholar]
- Obidjon T. Kasimova, Akhat T. Djanikulovb, and Sherali I. Mamayev,”Modelingthe bending of the tire surface bypadsduringbraking”, AIPConference Proceedings 2402, 070030 (2021). [Google Scholar]
- Salokhiddin Yunusov, Azamat Sultonov, Mashkhur Rakhmatov, Tojiddin Bobomurotov and Mirkhosil Agzamov, “Results of studies on extending the time operation ofgin andlinter grates”, E3SWebofConferences, 2021, 304, 03028. [Google Scholar]
- Djurayev, A., Yunusov, S., Mirzaumidov, A. (2020)/«Development of an effective design and calculation for the bending of a gin saw cylinder» // International Journal of Advanced Science and Technology, vol.29.№4,pp. 1371-1390. [Google Scholar]
- Agzamov, M.,Yunusov, S., Gafurov, J. (2017). / On the technological development of cotton primary processing, using a new drying-purifying unit // IOP Conference Series: Materials Science and Engineering, Volume 254, Issue 8. IOP Conf. Ser.: Mater. Sci. Eng. 254 082017. [CrossRef] [Google Scholar]
- Otabek Toirov and Nodirjon Tursunov, “Development of production technology of rolling stock cast parts”, E3SWebofConferences 264,05013 (2021). [Google Scholar]
- Otabek Toirov, Nodirjon Tursunov, Shavkat Alimukhamedov, and Lochinbek Kuchkorov, “Improvement of the out-of-furnace steel treatment technology for improvingitsmechanicalproperties”, E3SWeb ofConferences 365,05002(2023). [Google Scholar]
- 16.Lochinbek Kuchkorov, Shavkat Alimukhamedov, Nodirjon Tursunov, and Otabek Toirov, “Effect of different additives on the physical and mechanical properties of liquid-glass coremixtures”,E3SWebofConferences 365,05009 (2023). [Google Scholar]
- Murot Turakulov, Nodirjon Tursunov, andShavkat Alimukhamedov, “Development of technology for manufacturing molding and core mixtures for obtaining SCI”. [Google Scholar]
- Tursunov, N.K., Semin, A.E., Sanokulov, E.A. Study of desulfurization process of structural steel using solid slag mixtures and rare earth metals, (2016) Chernye Metally, (4), pp. 32-37. [Google Scholar]
- Tursunov N. K., Semin A. E., Kotelnikov G. I. Kinetic features of desulphurization process during steel melting in induction crucible furnace. Chernye Metally. 2017. No. 5. pp. 23–29. [Google Scholar]
- Tursunov N. K., Semin A. E., Sanokulov E. A. Study of dephosphoration and desulphurization processes in the smelting of 20GL steel in the induction crucible furnace with consequent ladle treatment using rare earth metals. Chernye Metally. 2017. No. 1. pp. 33–40. [Google Scholar]
- Ablyalimov, O., Petrochenko, S., Kodirov, N. (2023). Analyzing the Movement of a Freight Train at Stops on Flat Sections of the Railway. In: Guda, A. (eds) Networked Control Systems for Connected and Automated Vehicles. NN 2022. Lecture Notes in Networks and Systems, Vol. 510. Springer, Cham. pp. 165-171. [CrossRef] [Google Scholar]
- Ablyalimov, O., Khamidov, O., Domanov, K. (2023). Determination of Locomotive Traction Efficiency on the Section of Marokand-Kattakurgan of Uzbek Railway. In: Guda, A. (eds) Networked Control Systems for Connected and Automated Vehicles. NN 2022. Lecture Notes in Networks and Systems, vol 509. Springer, Cham. pp. 671680. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.