Open Access
Issue |
E3S Web of Conf.
Volume 401, 2023
V International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2023)
|
|
---|---|---|
Article Number | 03052 | |
Number of page(s) | 8 | |
Section | Road Construction, Building Structures and Materials | |
DOI | https://doi.org/10.1051/e3sconf/202340103052 | |
Published online | 11 July 2023 |
- Iskandarov U.T., Sharipov K. Increasing the efficiency of using lubricating oils. Tashkent (2004). [Google Scholar]
- Kuznetsov E.S. Technical operation of cars. Moscow, Nauka (2004). [Google Scholar]
- Alliluyev V.A. Technical exploitation of machine and tractor fleet. Moscow (1991). [Google Scholar]
- Grigoryev M.A. Quality of Engine Oil and Engine Reliability. Moscow, Publishing House of Standards, (1981). [Google Scholar]
- Iskandarov U.T. On one method of determining the need for fuel. TSTU Bulletin. (2005). [Google Scholar]
- Mamasalieva M.I. State and prospects of rational use and reduction of losses of fuel and lubricants of the Republic of Uzbekistan. Moscow. Assembling in Mechanical Engineering and Instrumentation. Vol. 213(236), pp. 141-145. (2020). [CrossRef] [Google Scholar]
- Ishmuratov H. K., and Ishmuratova, K. H. Size determination of abrasive particles that penetrate into the wedge-shaped gap of gear teeth. Journal of Friction and Wear, Vol. 42(2), pp. 130-137. (2021). [CrossRef] [Google Scholar]
- Kostetsk. B.I., and Linnik Y. Investigation of energy balance in external friction of metals. Doklady Akademii Nauk SSSR, Vol. 183(5), p.1052. (1968). [Google Scholar]
- Makhkamov K.H. Calculation of wear resistance of machines.Training manual. -Tashkent, Tashkent State Technical University, (2002). [Google Scholar]
- Ishmuratov H.K., Irgashev B.A. Evaluation of wear resistance of open gear pinion teeth in conditions of high dustiness. Vol. 41(1), Friction and Wear. (2020). [Google Scholar]
- Mindlin R. D. Compliance of elastic bodies in contact. (1949). [Google Scholar]
- Chang H., Lan C. W., Chen C. H., Kao M. J., and Guo J. B. Anti-wear and friction properties of nanoparticles as additives in the lithium grease. International journal of precision engineering and manufacturing, Vol. 15, pp.2059-2063. (2014). [CrossRef] [Google Scholar]
- Khachaturian S. V. Thermodynamic method of calculating the wear resistance of machine parts. Tashkent, (2004). [Google Scholar]
- Greger G., Kobold G. Calculation of wear on the basis of the friction energy accumulation hypothesis. Studies in tribotechnics. M.: NIIMASH, pp.187-195 (1975). [Google Scholar]
- Ikramov U.A., Irgashev A. The term of oil change in gears. J. Friction and wear. Vol.10(3), pp. 545 -554. (1989). [Google Scholar]
- Irgashev A. Wear of parts of grader transmission units in dusty environment. Tashkent, (1984). [Google Scholar]
- Irgashev A. Assessment of wear resistance of rolling friction units operating in an abrasive environment. Tashkent, (1996). [Google Scholar]
- Skundin G. I., Gorodetsky M. I. On modeling the process of gas exchange of tractor transmission. In the book: Ways to improve the reliability and durability of components and assemblies of tractor transmissions. Vol. 5. pp.18-23. (1979). [Google Scholar]
- Chernyaevsky I. Sh. Increasing the resource of the main gears. Tractors and agricultural machines. Vol. 2. (1999). [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.