Open Access
Issue
E3S Web of Conf.
Volume 401, 2023
V International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2023)
Article Number 05028
Number of page(s) 8
Section Engineering Materials Science, Intelligent Transport Systems and Transport Logistics
DOI https://doi.org/10.1051/e3sconf/202340105028
Published online 11 July 2023
  1. Rudenskij A.V. Resource-saving in construction on the example of the road industry. MIR Modernization. Innovation. Research, Vol. 7, pp.4–8. (2011). [Google Scholar]
  2. Kumar, R., & Chandra, S. Warm mix asphalt investigation on public roads – a review. Civil Eng Urban Plan Int J (CiVEJ), Vol. 3(2), pp.75–86. (2016). [CrossRef] [Google Scholar]
  3. Otabek Toirov and Nodirjon Tursunov. Development of production technology of rolling stock cast parts”. In E3S Web of Conferences Vol. 264, 05013 (2021). [Google Scholar]
  4. Prowell, B.D., Hurley, G.C., & Frank, B. Warm-mix asphalt: Best practices. Lanham, MD: National Asphalt Pavement Association. (2012). [Google Scholar]
  5. Nurmetov, Kh., Riskulov, A., Ikromov, A. Physicochemical Aspects of Polymer Composites Technology with Activated Modifiers. In AIP Conference Proceedings, Vol. 2656, p. 020011. (2022). [Google Scholar]
  6. Sidikova, T., Barxanadjyan, A., Hakimov, R., Sabirova, D., Mirsaatov, R. The impact that crushed rubber can have on the quality of bitumen and asphalt concrete IOP Conference Series: Materials Science and Engineering, Vol. 883(1), p.012198 (2020). [CrossRef] [Google Scholar]
  7. Kheradmand, B., Muniandy, R., Hua, L. T., Yunus, R. B., & Solouki, A. An overview of the emerging warm mix asphalt technology. International Journal of Pavement Engineering, Vol. 15(1), pp.79-94. (2014). [CrossRef] [Google Scholar]
  8. Kheradmand, B., Muniandy, R., Hua, L. T., Yunus, R. B., & Solouki, A. An overview of the emerging warm mix asphalt technology. International Journal of Pavement Engineering, Vol.15(1), pp.79-94. (2014). [CrossRef] [Google Scholar]
  9. Riskulov, A., Sharifxodjaeva, K., Nurmetov, K. Composite Materials Based on Regenerated Polyolefins for Road Construction Equipment. In AIP Conference Proceedings, Vol. 2637, p. 030013. (2022). [Google Scholar]
  10. Angelo, J., Harm, E., Bartoszek, J., Baumgardner, G., Corrigan, M., Cowsert, J., and Yeaton, B. Warm-mix asphalt: European practice (No. FHWA-PL-08-007). United States. Federal Highway Administration. Office of International Programs. (2008). [Google Scholar]
  11. Yero S. A., Hainin M. R. Evaluation of bitumen properties modified with additive. International Journal of Research and Reviews in Applied Sciences. Vol. 13. № 1. pp.93-97. (2012). [Google Scholar]
  12. Li, R., Wang, C., Wang, P., & Pei, J. Preparation of a novel flow improver and its viscosity-reducing effect on bitumen. Fuel, Vol.181, pp. 935-941. (2016). [CrossRef] [Google Scholar]
  13. Button J. W., Estakhri C., Wimsatt A.A. Synthesis of warm-mix asphalt. №SWUTC/07/0-5597-1. Texas Transportation Institute, p. 94. (2007). [Google Scholar]
  14. L. Kuchkorov, Sh.Alimukhamedov, N. Tursunov, and O. Toirov. Effect of different additives on the physical and mechanical properties of liquid-glass core mixtures. In E3S Web of Conferences Vol. 365, p.05009 (2023). [CrossRef] [EDP Sciences] [Google Scholar]
  15. Remisova, E., and Holy, M. Changes of properties of bitumen binders by additives application. In IOP conference series: Materials science and engineering. Vol. 245, No. 3, pp.1–7. (2017). [Google Scholar]
  16. Miradullaeva, G., Rakhmatov, E., Bozorov, O., Ziyamukhamedova, U., & Shodiev, B. Mathematical modeling of rheological properties during structure formation of heterocomposite potting materials and coatings and their application. In Proceedings of EECE 2020: Energy, Environmental and Construction Engineering 3 (pp. 346-355). Springer International Publishing. (2021). [Google Scholar]
  17. Turakulov, M., Tursunov, N., & Alimukhamedov, S. Development of technology for manufacturing molding and core mixtures for obtaining synthetic cast iron. In E3S Web of Conferences, Vol. 365, p. 05006. (2023). [CrossRef] [EDP Sciences] [Google Scholar]
  18. Renken, P. Walzasphalte mit viskositätsabsen kenden Additiven–Entwicklung und Opti mierung der Eignungs-und Kontrollprüfungs verfahren und Bestimmung der Einflüsse auf die performance-orientierten Asphalteigen schaften. Technische Universität Braun schweig, Institut für Straßenwesen. (2012). [Google Scholar]
  19. Toirov, O., Tursunov, N., Alimukhamedov, S., & Kuchkorov, L. Improvement of the out-of-furnace steel treatment technology for improving its mechanical properties. In E3S Web of Conferences, Vol. 365, p. 05002. (2023). [CrossRef] [EDP Sciences] [Google Scholar]
  20. Barkhanadzhyan, A., Riskulov, A., Karimov, M., Khakimov, R., & Ibragimov, B. Development of high-strength concrete with the addition of a universal superplasticizer. In E3S Web of Conferences, Vol. 264, p. 02062. (2021). [CrossRef] [EDP Sciences] [Google Scholar]
  21. Nurkulov, F., Ziyamukhamedova, U., Rakhmatov, E., & Nafasov, J. Slowing down the corrosion of metal structures using polymeric materials. In E3S Web of Conferences, Vol. 264, p. 02055. (2021). [CrossRef] [EDP Sciences] [Google Scholar]
  22. Ziyamukhamedova, U., Rakhmatov, E., & Nafasov, J. Optimization of the composition and properties of heterocomposite materials for coatings obtained by the activation-heliotechnological method. In Journal of Physics: Conference Series, Vol. 1889, No. 2, p. 022056. (2021). [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.