Open Access
Issue |
E3S Web of Conf.
Volume 401, 2023
V International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2023)
|
|
---|---|---|
Article Number | 05035 | |
Number of page(s) | 8 | |
Section | Engineering Materials Science, Intelligent Transport Systems and Transport Logistics | |
DOI | https://doi.org/10.1051/e3sconf/202340105035 | |
Published online | 11 July 2023 |
- Ergun, Y., Güneş, İ., Erdoğan, M., And Cankaya, N., “EffectOfBoriding Treatment On The Corrosion Behavior Of Steels”, Journal Of Nanoscience And Nanotechnology, 17 (12): 8946–8951 (2017). [CrossRef] [Google Scholar]
- Liszewski, M., Kasprzycka, E., Krupicz, B., And Tarasiuk, W., “The Analysis Of The Selected Processes Of Thermo Chemical Heat Treatment Of 20mncr5 Steel In The Context Of Abrasive Wear”, Tribologia International, (269(5)): 183–193 (2016). [CrossRef] [Google Scholar]
- Krumes, D., Stubičar, M., Kladarić, I., Milinović, A., AndDucu, C., “ImprovementOf Surface Layer Properties Of Some Constructional Steels Induced By Applying Thermodiffusional Duplex Treatment”, Int. J. Of Microstructure And Materials Properties, 6 (5): 425–434 (2011). [CrossRef] [Google Scholar]
- Tarakci, M., Gencer, Y., And Calik, A., “Comparative Study Of Effect Of Pure Vanadium Under A Controlled Atmosphere”, Applied Surface Science, 256 (24): 7612–7618 (2010). [CrossRef] [Google Scholar]
- Ersöz, A., “Improvement of the Surface Properties of Steels by Electrochemical Boring”, M.Sc., Istanbul Technical University, (2008). [Google Scholar]
- Topuz, P., “Boronization of Different Steels in Fluidized Bed Furnace and Development of Boronization Parameters”, Ph.D., Marmara University, (2009). [Google Scholar]
- Yang, J., Wang, L., Zheng, Y., And Zhong, Z., “Strain Modified Constitutive Equation And Processing Maps Of High Quality 20mncr5(Sh) Gear Steel”, Crystals, 11 (5): 536 (2021). [CrossRef] [Google Scholar]
- Boztepe, M. H., “Effect Of Boronizing Temperature And Time On Abrasion And Corrosion Resistance Of Aisi 1050 Steel”, Msc Thesis, Çukurova University, (2014). [Google Scholar]
- Kayali, Y., “Investigation Of Diffusion Kinetics Of Borided Aisi P20 Steel In Micro-Wave Furnace”, Vacuum, 121: 129–134 (2015). [CrossRef] [Google Scholar]
- Koçaslan, A., “Investigation of Boriding and Thermal Cycle Boring Properties of 16mncr5 Steel”, M.Sc., Süleyman Demirel University, (2016). [Google Scholar]
- Bozbay, A. B., “Improving Fatigue and Abrasion Resistance of 20mncr5 and 8620 Materials Used in Tire Protective Chains for Different Heat Treatment Conditions”, M.Sc., Sakarya University, (2019). [Google Scholar]
- Sari, M., “Investigation of Microstructure and Mechanical Properties of Cementation Steel with Box Boring Method”, M.Sc., Adiyaman University, (2019). [Google Scholar]
- Küper, A., Qiao, X., Stock, H. R., And Mayr, P., “A Novel Approach To Gas Boronizing”, Surface And Coatings Technology, 130: 87–94 (2000). [CrossRef] [Google Scholar]
- Genel, K., Ozbek, I., And Bindal, C., “Kinetics Of Boriding Of Aisi W1 Steel”, Materials Science And Engineering: A, 347 (1): 311–314 (2003). [CrossRef] [Google Scholar]
- Sen, S., Sen, U., And Bindal, C., “The Growth Kinetics Of Borides Formed On Boronized Aisi 4140 Steel”, Vacuum, 77: 195–202 (2005). [CrossRef] [Google Scholar]
- Sen, S., Özbek, İ., Sen, U., AndBindal, C., “MechanicalBehaviorOfBorides Formed On Borided Cold Work Tool Steel”, Surface And Coatings Technology, 135: 173–177 (2001). [CrossRef] [Google Scholar]
- Ayter, T., “Investigation of the Effect of Boronizing on the Surface Quality and Wear Behavior of Steels”, M.Sc., Celal Bayar University, (2005). [Google Scholar]
- Kulka, M., Makuch, N., Pertek, A., And Piasecki, A., “An Alternative Method Of Gas Boriding Applied To The Formation Of Borocarburized Layer”, Materials Characterization, 72: 59–67 (2012). [CrossRef] [Google Scholar]
- Toprak, M., “The Effect of Solid Boring on the Surface Properties of Hardox 450 and Hardox HitufSteels”, M.Sc., Harran University, Şanliurfa, (2019). [Google Scholar]
- Şeşen, F. E., “Effect of Process Parameters on Electrothermochemical and Thermochemical Diffusion Layer Formation and Properties of Diffusion Layers on Steel Surfaces”, Ph.D., Istanbul Technical University, (2015). [Google Scholar]
- Carbucicchio, M. And Palombarini, G., “Effects Of Alloying Elements On The Growth Of Iron Boride Coatings”, Journal Of Materials Science Letters, 6 (10): 1147–1149 (1987). [CrossRef] [Google Scholar]
- Ambekar, S., Kadam, S., And Sonawane, S. A., “Comparative Study Of Effect Of Cryogenics Heat Treatment And Case Hardening On The Wear Property Of 20mncr5”, Applied Mechanics And Materials, 798: 435–439 (2015). [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.