Open Access
Issue
E3S Web of Conf.
Volume 401, 2023
V International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2023)
Article Number 05036
Number of page(s) 10
Section Engineering Materials Science, Intelligent Transport Systems and Transport Logistics
DOI https://doi.org/10.1051/e3sconf/202340105036
Published online 11 July 2023
  1. GOST 33211-2014 Freight wagons Requirements to structural strength and dynamic qualities (Moscow: Standartinform) p 54. (2014) [Google Scholar]
  2. Galay E I, Rudov P K, Galai E E, Railway braking systems. Calculation of pneumatic brakes Ministry of Education Resp. Belarusian, Belarusian state University of transport (Gomel: BelGUT) p 271. (2014) [Google Scholar]
  3. Galay E I, Rudov P K, Galai E E, Thermal calculation of frictional units of brakes of freight cars Mechanics. Research and innovation, 11, pp 31–40. (2018) [Google Scholar]
  4. Balakin V A, Galay E I, Thermal regime of a friction brake of high power in a transitional period of an increase in braking force Friction and Wear, 2 (20), pp 137-143. (1999) [Google Scholar]
  5. Vukolov L A, Zharov V A, Comparative friction characteristics of cermet and polymer composite brake pads Bulletin of VNIIZhT, 4, pp 19–24. (1999) [Google Scholar]
  6. Shakina A V, Development of an effective technology for obtaining a car brake shoe from a cermet friction material Dissertation, PhD, (Komsomolsk-na-Amure: Komsomolsk-na-Amure state university) p 147. (2014) [Google Scholar]
  7. Galay E I, Rudov P K, Galai E E, The effectiveness of braking locomotives with a pneumatic brake Bulletin of the Belarusian State University of Transport: Science and Transport, 2 (35), pp 5–7. (2017) [Google Scholar]
  8. B. Abdullaev, F. Galimova, H. Otajonov, S. Sultonaliev, P. Abdurakhmonov, J. Abdirakhmonov, Influence of solar radiation on heat flows ofrefrigerated wagons and containers / The 1st International Conference on Problems and Perspectives of Modern Science AIP Conference Proceedings 2432, 030005, Published Online: 16 June 2022. – P. 030005-1 – 030005-5;. [Google Scholar]
  9. R. Rahimov, B. Abdullaev, Ya. Hurmatov, O. Haydarov, K. Inoyatov, Analysis and prospects for the development of performance cargo transportation in the Republic of Uzbekistan / The 1st International Conference on Problems and Perspectives of Modern Science AIP Conference Proceedings 2432, 030066, Published Online: 16 June 2022. – P. 030066-1–030066-6. [Google Scholar]
  10. Galay E I, Inagamov S G, Yuldashov A A, Analytical study of the processes of pressure change in the brake chamber of the air distributor of a freight car Bulletin of BelSUT, 2 (41), pp 56–58. (2020) [Google Scholar]
  11. Galay E I, Inagamov S G, Yuldashov A A, Analysis of the parameters of friction brakes of various types for freight cars with cast iron shoes Railway Transport: Topical Issues and Innovations, 1, pp 55–77. (2021) [Google Scholar]
  12. Inozemtsev V G, Kazarinov V M, Yasentsev V F, Automatic brakes (Moscow: Transport) p 463. (1981) [Google Scholar]
  13. Kazarinov V M, Inozemtsev V G, Yasentsev V F, Theoretical foundations for the design and operation of automatic brakes (Moscow: Transport) p 399. (1968) [Google Scholar]
  14. Milošević M.S. [et al.]. Tomićmodelingthermaleffectsinbraking systems ofrailway vehicles. Modeling Thermal Effects in Braking Systems of Railway Vehicles Thermal Science, 2012, vol. 16, no. 2, pp. 515-526. [Google Scholar]
  15. Mačužić S. Thermal analysis of solid and vented disc brake during the braking process. Journal of the Serbian Society for Computational Mechanics, Vol.9(2), (2015). [Google Scholar]
  16. Mishin, A. A. Calculation of temperature fields and stresses in the details of the disc brake of a high–speed car / A.A. Mishin // VESTNIK VNIIZHT. – 2010. –№. 6. -pp. 39-43 [Google Scholar]
  17. Balakin, V. A. Temperature problems of friction / V.A. Balakin, V.P. Sergienko, Yu.V. Lysenok // Friction and wear. – 2002. –№3(23). – pp 258-267. [Google Scholar]
  18. Galay, E.I. Tests and thermal calculation of pad brakes of railway rolling stock / E.I. Galay, V.A. Balakin // Friction and wear. – 1999. –№ 5(20). – pp. 480-488. [Google Scholar]
  19. Inagamov, S.G. Friction block brake assembly of locomotives and freight cars / S.G. Inagamov // ISSN 2519-8742. Mechanics. Research and innovation. -2021. –№. 14. – pp. 67-74. [Google Scholar]
  20. Pershin, V.K. Modeling of thermal regimes in the frictional interaction of a wheel and a brake pad / V.K. Pershin, L.A. Fishbein // Transport of the Urals. -2005. –№. 1. – pp. 34-42. [Google Scholar]
  21. Zharov, I.A. Voronin Approximate calculation of surface temperatures of the “pads-wheel-rail” system /I.A. Zharov, I.N. Kurtse //Friction and wear. –2003. №2(24). – pp. 144-152. [Google Scholar]
  22. Chebakov, M.I. Modeling of the contact interaction of a railway wheel and a brake pads taking into account wear, heat release from friction and the dependence of mechanical parameters on temperature / S.A. Danilchenko, A.A. Lyapin // Natural Sciences. issn 0321-3005 izvestiya vuzov. The North Caucasus region. 2018. №.4. pp. 49 – 53. [Google Scholar]
  23. Turanov K., Gordienko A., Saidivaliev S., Djabborov S. Designing the height of the first profile of the marshalling hump. E3S Web of Conferences. Topical Problems of Green Architecture, Civil and Environmental Engineering, TPACEE 2019, 2020, pp. 03038.612. [Google Scholar]
  24. Turanov K., Gordienko A., Saidivaliev S., Djabborov S. Movement of the wagon on the marshalling hump under the impact of air environment and tailwind. E3S Web of Conferences. Topical Problems of Green Architecture, Civil and Environmental Engineering, TPACEE 2019, 2020, pp. 03041.413. [Google Scholar]
  25. Galai, E.I. Evaluation of the work of the braking equipment of freight cars on the Angren-Pap section of Uzbek Railways JSC / S.G. Inagamov, A.A. Yuldashov // ISSN 2519-8742. Mechanics. Research and innovation. No. 13, pp. 47-54. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.