Open Access
Issue |
E3S Web of Conf.
Volume 402, 2023
International Scientific Siberian Transport Forum - TransSiberia 2023
|
|
---|---|---|
Article Number | 04011 | |
Number of page(s) | 10 | |
Section | Automotive Engineering, Engines, Clean Fuels, and E-Mobility | |
DOI | https://doi.org/10.1051/e3sconf/202340204011 | |
Published online | 19 July 2023 |
- Prokudin, O.A., Solyaev, Y.O., Babaytsev, A.V., Artemyev, A.V., Korobkov, M.A. 2020. Dynamic characteristics of three-layer beams with load-bearing layers made of alumino-glass plastic. PNRPU Mechanics Bulletin, 4, 260-270. [CrossRef] [Google Scholar]
- Dudkin, K.K., Alifanov, O.M., Babaitsev, A.V. 2020. Determination of the thermophysical characterisitics of the Moon soil with depthed thermoprobes. Journal of Physics: Conference Series, 1683, Article number: 032023. [CrossRef] [Google Scholar]
- Babaytsev, A.V. Orekhov, A. Rabinskiy, L.N. 2020. Properties and microstructure of AlSi10Mg samples obtained by selective laser melting. Nanoscience and Technology: An International Journal, 11(3), 213-222. [CrossRef] [Google Scholar]
- Babaytsev, A.V., Rabinskiy, L.N., Thu Aung, K. 2020. Investigation of the contact zone of a cylindrical shell located between two parallel rigid plates with a gap. INCAS Bulletin, 12, 43-52. [CrossRef] [Google Scholar]
- Babaytsev, A.V., Kyaw, Ye.K., Vakhneev, S.N., Hein Thant, Z. 2020. Study of the influence of spherical inclusions on mechanical characteristics. Periodico Tche Quimica, 17(35), 654-662. [Google Scholar]
- Babaytsev, A.V., Kuznetsova, E.L., Rabinskiy, L.N., Tushavina, O.V. 2020. Investigation of permanent strains in nanomodified composites after molding at elevated temperatures. Periodico Tche Quimica, 17(34), 1055-1065. [Google Scholar]
- Janarthanan, B., Janarthanan, B., Padmanabhan, C., Sujatha, C. 2012. Longitudinal dynamics of a tracked vehicle: Simulation and experiment. Journal of Terramechanics, 49, 63-72. [CrossRef] [Google Scholar]
- Wong, J.Y. 2009. Development of high-mobility tracked vehicles for over snow operations. Journal of Terramechanics, 46(4), 141-155. [CrossRef] [Google Scholar]
- Kapitonov, M. V. (2021). Course-keeping ability of heavy transport units with an arbitrary number of links. Paper presented at the AIP Conference Proceedings, 2402 doi:10.1063/5.0071336 [Google Scholar]
- Schemelev, A.M., Naumenko, A.E., Buzhinsky, A.D., Shibeko, A.S. 2008. Determination of performance of single-bucket frontal loaders. Bulletin of the Belarusian-Russian University, 4(21), 55-61. [Google Scholar]
- Minin, V.V. 2010. Modeling of operational parameters of small-sized loaders. Bulletin of the Tomsk Polytechnic University, 2, 20-23. [Google Scholar]
- Pozin, B.M., Troyanovskaya, I.P., Vershinsky, L.V., Perepletchik, O.A. 2008. Influence of the constructive scheme of a front-end loader on work efficiency. Construction and Road Machines, 5, 31-32. [Google Scholar]
- Kapitonov, M.V. (2021). Mathematical model of the kinematics of turning of wheeled construction equipment with real and ideal control systems for steering the wheels of a semi-trailer. Paper presented at the AIP Conference Proceedings, 2402 doi:10.1063/5.0071308 [Google Scholar]
- Kapitonov, M.V. (2022). Evaluation and analysis of risks in automotive industry. Paper presented at the Transportation Research Procedia, 61, 556-560. doi:10.1016/j.trpro.2022.01.090 [CrossRef] [Google Scholar]
- Vahterova, Y.A., Fedotenkov, G.V. 2020. The inverse problem of recovering an unsteady linear load for an elastic rod of finite length. Journal of Applied Engineering Science, 18(4), 687-692. [CrossRef] [Google Scholar]
- Ivannikov, S.I., Vahterova, Y.A., Utkin, Y.A., Sun, Y. 2021. Calculation of strength, rigidity, and stability of the aircraft fuselage frame made of composite materials. INCAS Bulletin, 13, 77-86. [CrossRef] [Google Scholar]
- Vahterova, Y.A., Min, Y.N. 2021. Effect of shape of armoring fibers on strength of composite materials. Turkish Journal of Computer and Mathematics Education, 12(2), 2703-2708. [Google Scholar]
- Starovoitov, E.I., Zakharchuk, Y.V., Kuznetsova, E.L., Kuznetsova, E.L. 2021. Elastic circular sandwich plate with compressible filler under axially symmetrical thermal force load. Journal of the Balkan Tribological Association, 27(2), 175-188. [Google Scholar]
- Sun, Y., Kolesnik, S.A., Kuznetsova, E.L. 2020. Mathematical modeling of coupled heat transfer on cooled gas turbine blades. INCAS Bulletin, 12, 193-200. [CrossRef] [Google Scholar]
- Kuznetsova, L.E., Fedotenkov, V.G. 2020. Dynamics of a spherical enclosure in a liquid during ultrasonic cavitation. Journal of Applied Engineering Science, 18(4), 681-686. [CrossRef] [Google Scholar]
- Kuznetsova, E.L., Fedotenkov, G.V., Starovoitov, E.I. 2020. Methods of diagnostic of pipe mechanical damage using functional analysis, neural networks and method of finite elements. INCAS Bulletin, 12, 79-90. [CrossRef] [Google Scholar]
- Kyaw, Y.K., Pronina, P.F., Polyakov, P.O. 2020. Mathematical modelling of the effect of heat fluxes from external sources on the surface of spacecraft. Journal of Applied Engineering Science, 18(4), 732-736. [CrossRef] [Google Scholar]
- Egorova, O.V., Kyaw, Y.K. 2020. Solution of inverse non-stationary boundary value problems of diffraction of plane pressure wave on convex surfaces based on analytical solution. Journal of Applied Engineering Science, 18(4), 676-680. [CrossRef] [Google Scholar]
- Rabinskiy, L.N., Tushavina, O.V., Starovoitov, E.I. 2020. Study of thermal effects of electromagnetic radiation on the environment from space rocket activity. INCAS Bulletin, 12, 141-148. [CrossRef] [Google Scholar]
- Kolesnik, S.A., Bulychev, N.A. Numerical analytic method for solving the inverse coefficient problem of heat conduction in anisotropic half-space. Journal of Physics: Conference Series, 2020, 1474(1), 012024. [CrossRef] [Google Scholar]
- Butusova., O.A. Surface Modification of Titanium Dioxide Microparticles under Ultrasonic Treatment, International Journal of Pharmaceutical Research, 2020, Vol. 12, I. 4, pp. 2292-2296. [Google Scholar]
- Tarasova, A.N. Vibration-based Method for Mechanochemical Coating Metallic Surfaces, International Journal of Pharmaceutical Research, 2020, Vol. 12, Supplementary Issue 2, pp. 1160-1168. [Google Scholar]
- Garibyan, B.A. Mechanical Properties of Electroconductive Ceramics, International Journal of Pharmaceutical Research, 2020, Vol. 12, Supplementary Issue 2, pp. 1825-1828. [Google Scholar]
- Garibyan, B.A. Enhancement of Mechanical Properties of Inorganic Glass under Ultrasonic Treatment, International Journal of Pharmaceutical Research, 2020, Vol. 12, Supplementary Issue 2, pp. 1829-1832. [Google Scholar]
- Kaptakov, M.O. Effect of Ultrasonic Treatment on Stability of TiO2 Aqueous Dispersions in Presence of Water-Soluble Polymers, International Journal of Pharmaceutical Research, 2020, Vol. 12, Supplementary Issue 2, pp. 1821-1824. [Google Scholar]
- Kapitonov, M. V. (2022). Relative slippage during the modulation of interaction of a pneumatic tire with a bearing surface. Paper presented at the Transportation Research Procedia, 61, 561-566. doi:10.1016/j.trpro.2022.01.091 [CrossRef] [Google Scholar]
- Kaptakov, M.O. Catalytic Desulfuration of Oil Products under Ultrasonic Treatment, International Journal of Pharmaceutical Research, 2020, Vol. 12, Supplementary Issue 2, pp. 1838-1843. [Google Scholar]
- Tarasova, A.N. Effect of Reagent Concentrations on Equilibria in Water-Soluble Complexes, International Journal of Pharmaceutical Research, 2020, Vol. 12, Supplementary Issue 2, pp. 1169-1172. [Google Scholar]
- Tarasova, A.N. Effect of Vibration on Physical Properties of Polymeric Latexes, International Journal of Pharmaceutical Research, 2020, Vol. 12, Supplementary Issue 2, pp. 1173-1180. [Google Scholar]
- Kaptakov, M.O. Enhancement of Quality of Oil Products under Ultrasonic Treatment, International Journal of Pharmaceutical Research, 2020, Vol. 12, Supplementary Issue 2, pp. 1851-1855. [Google Scholar]
- Babaytsev, A.V., Astapov, A.N., Ripetskiy, A.V., Sha, M. Verification of mechanical properties and surface topography of PH1 stainless steel samples obtained by selective laser melting. Periodicals of Engineering and Natural Sciences, 2021, 9(4), pp. 417–432. [CrossRef] [Google Scholar]
- Astapov, A.N., Rabinskiy, L.N., Tushavina, O.V., & Starovoitov, E.I. (2021). Influence of air plasma flow on a cf /sic composite with a si-tisi2-mosi2-tib2-casi2 heat-resistant coating system. Journal of the Balkan Tribological Association, 27(2), 231-242. [Google Scholar]
- Bulychev, N.A. Preparation of Stable Suspensions of ZnO Nanoparticles with Ultrasonically Assisted Low-Temperature Plasma, Nanoscience and Technology: An International Journal, 2021, Vol. 12, No. 3, pp. 91-97. [CrossRef] [Google Scholar]
- Solyaev Y., Babaytsev A.. Direct observation of plastic shear strain concentration in the thick GLARE laminates under bending loading. Composites Part B: Engineering, Vol. 224, 2021. Proceedings, 2402. [Google Scholar]
- Butusova, O.A. Vinyl Ether Copolymers as Stabilizers of Carbon Black Suspensions, International Journal of Pharmaceutical Research, 2020, Vol. 12, Supplementary Issue 2, pp. 1152-1155. [Google Scholar]
- Perchenok A.V., Suvorova E.V., Farmakovskaya A.A., Kohlert, V. Application of vinyl ether copolymers for surface modification of carbon black, International Journal of Circuits, Systems and Signal Processing, 2021, Vol. 15, pp. 1414-1420. [CrossRef] [Google Scholar]
- Goncharenko V., Mikhaylov Yu., Kartushina N. Pattern recognition techniques for classifying aeroballistic flying vehicle paths. Neural Computing and Applications, 2022, Vol. 34, I. 5, pp. 4033-4045. [CrossRef] [Google Scholar]
- Bulychev, N.A. Study of Interaction of Surface-Active Polymers with ZnO Nanoparticles Synthesized in Ultrasonically Assisted Plasma Discharge, Nanoscience and Technology: An International Journal, 2022, Vol. 13, I. 1, pp. 55-65. [CrossRef] [Google Scholar]
- Burova, A.Yu. Theoretical basis, concept and methodology of control and correction of turbojet engines thrust asymmetry, Journal of Physics: Conference Series, 2022, 2308(1), 012006. [CrossRef] [Google Scholar]
- Butusova, O.A. Adsorption Behaviour of Ethylhydroxyethyl Cellulose on the Surface of Microparticles of Titanium and Ferrous Oxides, International Journal of Pharmaceutical Research, 2020, Vol. 12, Supplementary Issue 2, pp. 1156-1159. [Google Scholar]
- Golikov, V. A. (2022). Method for analytical evaluation and control of technical state of engineering products. Paper presented at the AIP Conference Proceedings, , 2467 doi:10.1063/5.0092789 [Google Scholar]
- Babaytsev, A., Nikitin A., Ripetskiy A. VHCF of the 3D-Printed Aluminum Alloy AlSi10Mg. Inventions 8(1):33, DOI:10.3390/inventions8010033. [Google Scholar]
- Perchenok A.V., Suvorova E.V., Farmakovskaya A.A., Kohlert, V. Stabilization of aqueous dispersions of inorganic microparticles under mechanical activation, WSEAS Transactions on Applied and Theoretical Mechanics, 2021, Vol. 16, pp. 127-133. [CrossRef] [Google Scholar]
- Babaytsev A.V., Zotov A.A. Designing and Calculation of Extruded Sections of an Inhomogeneous Composition. Russian Metallurgy (Metally). Volume 2019, Issue 13, 1 December 2019, Pages 1452-1455, DOI: 10.1134/S0036029519130020. [CrossRef] [Google Scholar]
- Kaptakov, M.O. Synthesis and Characterization of Polymer Composite Materials Based on Polyethylene and CuO Nanoparticles, AIP Conference Proceedings, 2021, Vol. 2402, article number 020027. [Google Scholar]
- Golikov, V. A. (2021). Maintainability of individual assembly units in mechanical engineering. Paper presented at the AIP Conference Proceedings, 2402 doi:10.1063/5.0071634 [Google Scholar]
- Bulychev, N.A., Rabinskiy L.N., Tushavina, O.V. Effect of Intensive Mechanic Vibration of Ultrasonic Frequency on Thermal Instable Low-Temperature Plasma, Nanoscience and Technology. An International Journal, 2020, Vol. 11, I. 1, pp. 15-21. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.