EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 402 (2023) E3S Web of Conf., 402 (2023) 07027 References
Open Access
Issue
E3S Web of Conf.
Volume 402, 2023
International Scientific Siberian Transport Forum - TransSiberia 2023
Article Number 07027
Number of page(s) 9
Section High-Performance Buildings, Energy Modeling, Heat & Mass Transfer
DOI https://doi.org/10.1051/e3sconf/202340207027
Published online 19 July 2023
  1. Vorotnikov, I.A. 1990. Entertaining drawing. Moscow: Prosveshcheniye. [Google Scholar]
  2. Babaytsev, A.V. Orekhov, A. Rabinskiy, L.N. 2020. Properties and microstructure of AlSi10Mg samples obtained by selective laser melting. Nanoscience and Technology: An International Journal, 11(3), 213-222. [CrossRef] [Google Scholar]
  3. Babaytsev, A.V., Rabinskiy, L.N., Thu Aung, K. 2020. Investigation of the contact zone of a cylindrical shell located between two parallel rigid plates with a gap. INCAS Bulletin, 12, 43-52. [CrossRef] [Google Scholar]
  4. Babaytsev, A.V., Kuznetsova, E.L., Rabinskiy, L.N., Tushavina, O.V. 2020. Investigation of permanent strains in nanomodified composites after molding at elevated temperatures. Periodico Tche Quimica, 17(34), 1055-1065. [Google Scholar]
  5. Vahterova, Y.A., Fedotenkov, G.V. 2020. The inverse problem of recovering an unsteady linear load for an elastic rod of finite length. Journal of Applied Engineering Science, 18(4), 687-692. [CrossRef] [Google Scholar]
  6. Amosov, A. G. (2021). Classification indicators of maintainability of technical systems. Paper presented at the AIP Conference Proceedings, 2402 doi:10.1063/5.0071519 [Google Scholar]
  7. O.A. Butusova. Adsorption Behaviour of Ethylhydroxyethyl Cellulose on the Surface of Microparticles of Titanium and Ferrous Oxides, International Journal of Pharmaceutical Research, 2020, Vol. 12, Supplementary Issue 2, pp. 1156-1159. [Google Scholar]
  8. Y. Solyaev, A. Babaytsev. Direct observation of plastic shear strain concentration in the thick GLARE laminates under bending loading. Composites Part B: Engineering, Vol. 224, 2021. Proceedings, 2402. [Google Scholar]
  9. Kapitonov, M. V. (2022). Evaluation and analysis of risks in automotive industry. Paper presented at the Transportation Research Procedia, 61, 556-560. doi:10.1016/j.trpro.2022.01.090 [CrossRef] [Google Scholar]
  10. Babaytsev A.V., Zotov A.A. Designing and Calculation of Extruded Sections of an Inhomogeneous Composition. Russian Metallurgy (Metally). Volume 2019, Issue 13, 1 December 2019, Pages 1452-1455, DOI: 10.1134/S0036029519130020 [CrossRef] [Google Scholar]
  11. Amosov, A. G. (2022). Comparative analysis of materials of loading devices of machine building. Paper presented at the AIP Conference Proceedings, , 2467 doi:10.1063/5.0092787 [Google Scholar]
  12. A.Y. Burova. Concept of multistage discrete fourier transform without performing multiplications, Journal of Physics: Conference Series, 2021, vol. 1889, no. 2, 022003. [CrossRef] [Google Scholar]
  13. Kapitonov, M. V. (2021). Mathematical model of the kinematics of turning of wheeled construction equipment with real and ideal control systems for steering the wheels of a semi-trailer. Paper presented at the AIP Conference Proceedings, 2402 doi:10.1063/5.0071308. [Google Scholar]
  14. B.A. Garibyan. Mechanical Properties of Electroconductive Ceramics, International Journal of Pharmaceutical Research, 2020, Vol. 12, Supplementary Issue 2, pp. 1825-1828. [Google Scholar]
  15. Sun, Y., Kolesnik, S.A., Kuznetsova, E.L. 2020. Mathematical modeling of coupled heat transfer on cooled gas turbine blades. INCAS Bulletin, 12, 193-200. [CrossRef] [Google Scholar]
  16. O.A. Butusova. Surface Modification of Titanium Dioxide Microparticles under Ultrasonic Treatment, International Journal of Pharmaceutical Research, 2020, Vol. 12, I. 4, pp. 2292-2296. [Google Scholar]
  17. A.N. Tarasova. Vibration-based Method for Mechanochemical Coating Metallic Surfaces, International Journal of Pharmaceutical Research, 2020, Vol. 12, Supplementary Issue 2, pp. 1160-1168. [Google Scholar]
  18. Amosov, A. G. (2021). Curvilinear trajectory of track machines. Paper presented at the AIP Conference Proceedings, 2402 doi:10.1063/5.0071513 [Google Scholar]
  19. Kapitonov, M. V. (2021). Course-keeping ability of heavy transport units with an arbitrary number of links. Paper presented at the AIP Conference Proceedings, 2402 doi:10.1063/5.0071336 [Google Scholar]
  20. N.A. Bulychev. Synthesis of Gaseous Hydrogen and Nanoparticles of Silicon and Silica by Pyrolysis of Tetraethoxysilane in an Electric Discharge under the Ultrasonic Action, International Journal of Hydrogen Energy, 2022, Vol. 47, I. 84, pp. 35581-35587. [CrossRef] [Google Scholar]
  21. O.A. Butusova. Stabilization of Carbon Microparticles by High-Molecular Surfactants, International Journal of Pharmaceutical Research, 2020, Vol. 12, Supplementary Issue 2, pp. 1147-1151. [Google Scholar]
  22. M.O. Kaptakov. Catalytic Desulfuration of Oil Products under Ultrasonic Treatment, International Journal of Pharmaceutical Research, 2020, Vol. 12, Supplementary Issue 2, pp. 1838-1843. [Google Scholar]
  23. A.N. Tarasova. Effect of Reagent Concentrations on Equilibria in Water-Soluble Complexes, International Journal of Pharmaceutical Research, 2020, Vol. 12, Supplementary Issue 2, pp. 1169-1172. [Google Scholar]
  24. Babaytsev, A., Nikitin A., Ripetskiy A. VHCF of the 3D-Printed Aluminum Alloy AlSi10Mg. Inventions 8(1):33, DOI 10.3390/inventions8010033 [Google Scholar]
  25. Thant Zin Hein, Arseniy V. Babaytsev, A.V. Ripetskiy. Effect of build atmosphere on the surface roughness of AlSi10Mg samples produced by selective laser melting. Nanoscience and Technology: An International Journal, 2022, Vol. 13, Issue 1, pp. 1-9. [CrossRef] [Google Scholar]
  26. A.N. Tarasova. Effect of Vibration on Physical Properties of Polymeric Latexes, International Journal of Pharmaceutical Research, 2020, Vol. 12, Supplementary Issue 2, pp. 1173-1180. [Google Scholar]
  27. M.O. Kaptakov. Enhancement of Quality of Oil Products under Ultrasonic Treatment, International Journal of Pharmaceutical Research, 2020, Vol. 12, Supplementary Issue 2, pp. 1851-1855. [Google Scholar]
  28. O.A. Butusova. Vinyl Ether Copolymers as Stabilizers of Carbon Black Suspensions, International Journal of Pharmaceutical Research, 2020, Vol. 12, Supplementary Issue 2, pp. 1152-1155. [Google Scholar]
  29. N.A. Bulychev. Obtaining of Gaseous Hydrogen and Silver Nanoparticles by Decomposition of Hydrocarbons in Ultrasonically Stimulated Low-Temperature Plasma, International Journal of Hydrogen Energy, 2022, Vol. 47, I. 50, pp. 21323-21328. [CrossRef] [Google Scholar]
  30. A.V. Perchenok, E.V. Suvorova, A.A. Farmakovskaya, V. Kohlert. Application of vinyl ether copolymers for surface modification of carbon black, International Journal of Circuits, Systems and Signal Processing, 2021, Vol. 15, pp. 1414-1420. [Google Scholar]
  31. Vladimir Goncharenko, Yury Mikhaylov, Natalya Kartushina. Pattern recognition techniques for classifying aeroballistic flying vehicle paths. Neural Computing and Applications, 2022, Vol. 34, I. 5, pp. 4033-4045. [CrossRef] [Google Scholar]
  32. Pogodin V.A., Astapov A.N., Eremkina M.S., Babaytsev A.V., Rabinskiy L.N. Investigation of the low-temperature oxidation effect on the structure and mechanical properties of c/c composite. Nanoscience and Technology, Vol. 12, Issue 3, pp. 29 – 46, 2021, DOI: 10.1615/NanoSciTechnolIntJ.2021037997 [CrossRef] [Google Scholar]
  33. N.A. Bulychev, L.N. Rabinskiy, O.V. Tushavina. Effect of Intensive Mechanic Vibration of Ultrasonic Frequency on Thermal Instable Low-Temperature Plasma, Nanoscience and Technology. An International Journal, 2020, Vol. 11, I. 1, pp. 15-21. [Google Scholar]
  34. N.A. Bulychev, S.A. Kolesnik. Reinforcement of Polymer Composite Materials by Titanium Dioxide Nanoparticles Synthesized in Plasma Discharge under Ultrasonic Cavitation. IOP Conference Proceedings, 2022, Vol. 2231, article number 012012. [Google Scholar]
  35. Amosov, A. G. (2021). Comparative analysis of requirements for industrial cleanliness in mechanical engineering. Paper presented at the Journal of Physics: Conference Series, 1889(4) doi:10.1088/1742-6596/1889/4/042033 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.