Open Access
Issue |
E3S Web of Conf.
Volume 405, 2023
2023 International Conference on Sustainable Technologies in Civil and Environmental Engineering (ICSTCE 2023)
|
|
---|---|---|
Article Number | 03001 | |
Number of page(s) | 16 | |
Section | Structural Engineering & Concrete Technology | |
DOI | https://doi.org/10.1051/e3sconf/202340503001 | |
Published online | 26 July 2023 |
- V. Prinay, M. Harihanandh, Numerical analysis of G + 4 residential building with STAAD.Pro., Mater. Today: Proc., 66(3), 1329-1336 (2022). https://doi.org/10.1016/j.matpr.2022.05.143 [CrossRef] [Google Scholar]
- K. Surender Kumar, N. Lingeshwaran, H.J. Syed, Analysis of residential building with STAAD. Pro & ETABS., Mater. Today: Proc., 33(1), 1221–1228 (2020). https://doi.org/10.1016/j.matpr.2020.08.329 [CrossRef] [Google Scholar]
- L.N. Jinka, G.Nikhil Vamsi, P.Bhuvaneshwari, Analysis and cost comparison of framed structure using different building materials under different load combinations, Mater. Today: Proc., 60(1), 440–447 (2022). https://doi.org/10.1016/j.matpr.2022.01.315 . [CrossRef] [Google Scholar]
- V.Donthuri, M.Saravanan, Design and analysis of the building in different seismic zone & wind, Mater. Today: Proc., 62(6), 4065–4072 (2022). https://doi.org/10.1016/j.matpr.2022.04.625 [CrossRef] [Google Scholar]
- D. Supraja, R.Gopi, K.Murali, Earthquake resistant design of G + 5 multistorey residential building using STAAD.Pro., Mater. Today: Proc., 46(17), 8807–8811 (2021) https://doi.org/10.1016/j.matpr.2021.04.180 . [CrossRef] [Google Scholar]
- A. Muhammad, L.Yuhan, C.P.C Jack, J.L.G Vincent, Reinforced concrete structural design optimization: A critical review, J. Clean. Prod., 260(1), 120623 (2020) https://doi.org/10.1016/j.jclepro.2020.120623 [CrossRef] [Google Scholar]
- F.H. Abanda, C.Vidalakis, A.H. Oti, J.H.M Tah, A critical analysis of Building Information Modelling systems used in construction projects, Adv. Eng. Softw. 90, 183–201 (2015). http://dx.doi.org/10.1016/j.advengsoft.2015.08.009 [CrossRef] [Google Scholar]
- J.C. P Cheng, L.Qiqi, Y.Deng, Analytical review and evaluation of civil information modelling, Autom. Constr. 67, 31–47 (2016). http://dx.doi.org/10.1016/j.autcon.2016.02.006 [CrossRef] [Google Scholar]
- M.Lino, M.Pedro, G.F. João, BIM methodology, a new approach - case study of structural elements creation., Proc.Eng. 114, 816 – 823 (2015) doi:10.1016/j.proeng.2015.08.032 [CrossRef] [Google Scholar]
- C.V.K Sarath, K.Ashok Kumar, N. Lingeshwaran, S. Vigneshkannan, S. Pratheba, Study on analysis and design of a multi-storey building with a single column using STAAD.Pro, Mater. Today: Proc., 33, 728–731 (2020) https://doi.org/10.1016/j.matpr.2020.06.073 [CrossRef] [Google Scholar]
- G.S. Papavasileiou, D.C. Charmpis, Earthquake-resistant buildings with steel or composite columns: Comparative assessment using structural optimization, J. Build. Eng., 27, 100988 (2020) https://doi.org/10.1016/j.jobe.2019.100988 [CrossRef] [Google Scholar]
- F.D. Trapania, A.P. Sbernaa, G.C. Marano, Cost and EAL based optimization for seismic reinforcement of RC structures, Proc. Str. Integ., 33, 917–924 (2021) 10.1016/j.prostr.2021.10.102 [Google Scholar]
- S. Kim, H. Kwak, Optimization of an RC frame structure based on a plastic analysis and direct search of a section database, J. Build. Eng., 48, 103959 (2022) https://doi.org/10.1016/j.jobe.2021.103959 [CrossRef] [Google Scholar]
- F. Nigroa, R. Falconea, E. Martinelli, Seismic upgrading of RC structures through an optimization procedure based on Genetic Algorithm, Proc. Str. Integ., 44, 1704–1711(2023). 10.1016/j.prostr.2023.01.218 [Google Scholar]
- S.E. Aslay, T. Dede, 3D cost optimization of 3 story RC constructional building using Jaya algorithm, Struc., 40, 803–811(2022) https://doi.org/10.1016/j.istruc.2022.04.055 [Google Scholar]
- K. Lin, Z. Wu, Y. Zhu, J. Zheng, Y. Li, X. Lu, Progressive collapse design optimization of RC frame structures using high-performance computing, Struc., 50, 823-834 (2023) https://doi.org/10.1016/j.istruc.2023.02.085 [Google Scholar]
- IS 875– 1 (1987): Code of practice for Design Loads (Other than Earthquake) for buildings and structures, Part 1: Dead Loads – Unit weights of Buildings and stored Materials, Bureau of Indian Standards, India. [Google Scholar]
- IS 875 -2 (1987): Code of practice for Design Loads (Other than Earthquake) for buildings and structures, Part 2: Imposed Loads, Bureau of Indian Standards, India. [Google Scholar]
- IS 875 -3 (2015): Code of practice for Design Loads (Other than Earthquake) for buildings and structures, Part 3: Wind Loads (CED 37 Structural safety), Bureau of Indian Standards, India. [Google Scholar]
- IS 1893 -1 (2016): Criteria for Earthquake Resistant Design of structures, Part 1: General Provisions and Buildings, Bureau of Indian Standards, India. [Google Scholar]
- IS 13920 (2016): Code of practice for Ductile Detailing of Reinforced Concrete Structure subjected to seismic forces, Bureau of Indian Standards, India. [Google Scholar]
- IS 456 (2000): Code of practice for Plain and Reinforced Concrete (CED 2: Cement and Concrete), Bureau of Indian Standards, India. [Google Scholar]
- SP 7:2016, National Building Code of India, 2016, (NBC 2016), Bureau of Indian Standards, India. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.