Open Access
Issue
E3S Web of Conf.
Volume 405, 2023
2023 International Conference on Sustainable Technologies in Civil and Environmental Engineering (ICSTCE 2023)
Article Number 03008
Number of page(s) 17
Section Structural Engineering & Concrete Technology
DOI https://doi.org/10.1051/e3sconf/202340503008
Published online 26 July 2023
  1. Soliman, N. M. (2013). Effect of using marble powder in concrete mixes on the behavior and strength of RC slabs. International Journal of Current Engineering and Technology, 3(5), 1863-1870. [Google Scholar]
  2. Raghunath, P. N., Suguna, K., Karthick, J., & Sarathkumar, B. (2019). Mechanical and durability characteristics of marble-powder-based high-strength concrete. Scientia Iranica, 26(6), 3159-3164. [Google Scholar]
  3. Suresh, S., & Revathi, J. (2019). An Experimental Examination on Mechanical and Durability Properties of Cement Replacing with Marble Powder. International Journal of Innovative Technology and Exploring Engineering, Volume-9, Issue-2S2, December 2019 [Google Scholar]
  4. Kim, J. J., Heo, Y. S., & Noguchi, T. (2015). Effect of iron powder on inhibition of carbonation process in cementitious materials. ISIJ International, 55(7), 1522-1530. [CrossRef] [Google Scholar]
  5. Kuckian, S., & Dalvi, A. (2020). Strength Possibilities on Fly ash Based Interlock Pavers. In Applied Mechanics and Materials (Vol. 897, pp. 12-19). Trans Tech Publications Ltd. [CrossRef] [Google Scholar]
  6. Baboo, R., Khan, H. N., Kr, A., Rushad, S. T., & Duggal, S. K. (2011). Influence of Marble powder/granules in Concrete mix. International Journal of Civil & Structural Engineering, 1(4), 827-834. [Google Scholar]
  7. Shelke, V. M., Pawde, P., & Shrivastava, R. (2012). Effect of marble powder with and without silica fume on mechanical properties of concrete. Journal of Mechanical and Civil Engineering, 1(1), 40-45. [Google Scholar]
  8. Latha, G., Reddy, A. S., & Mounika, K. Experimental investigation on strength characteristics of concrete using waste marble powder as cementitious material. growth, Vol. 4, Issue 12, December 2015 [Google Scholar]
  9. Sharma, N., Thakur, M. S., Kumar, R., Malik, M. A., Alahmadi, A. A., Alwetaishi, M., & Alzaed, A. N. (2022). Assessing Waste Marble Powder Impact on Concrete Flexural Strength Using Gaussian Process, SVM, and ANFIS. Processes, 10(12), 2745. [CrossRef] [Google Scholar]
  10. Boukhelkhal, A., Azzouz, L., Benchaa, B., & Belaidi, A. S. E. (2017). Strength and durability of low-impact environmental self-compacting concrete incorporating waste marble powder. Journal of Building Materials and Structures, 4(2), 31-41. [Google Scholar]
  11. Kumar, N., Brijbhushan, S., Maneeth, P. D., Shreenivas, R. S., & Siddharth, B. (2018). Experimental study on strength properties of concrete replacing cement by marble dust and sand by iron ore tailings. International Journal of Advanced Technology and Engineering Exploration, 5(45), 255-261. [CrossRef] [Google Scholar]
  12. Laboratory Testing INC. (n.d.). Scanning Electron Microscopy SEM Analysis with EDS Capabilities. https://labtesting.com/services/materials-testing/metallurgical-testing/sem-analysis/ [Google Scholar]
  13. Bamforth, P., Chisholm, D., Gibbs, J., & Harrison, T. (2008). Properties of concrete for use in Eurocode 2. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.