Open Access
Issue
E3S Web of Conf.
Volume 405, 2023
2023 International Conference on Sustainable Technologies in Civil and Environmental Engineering (ICSTCE 2023)
Article Number 03015
Number of page(s) 10
Section Structural Engineering & Concrete Technology
DOI https://doi.org/10.1051/e3sconf/202340503015
Published online 26 July 2023
  1. O. M. G Al-Kerttani, A.K. Ibrahim, A. Mutar, M.Z Yousif. Effect of mineral admixture on the properties of engineered cementitious composite. Periodicals of Engineering and Natural Sciences 9(40), 1029-1037 (2021). [CrossRef] [Google Scholar]
  2. L.Kanamarlapudi, K.B.Jonalagadda, D.C.K. Jagarapu et al. Different mineral admixtures in concrete: a review. SN Appl. Sci. 2, 760 (2020). [CrossRef] [Google Scholar]
  3. M.J. Al-Kheetan and M.M. Rahman Integration of Anhydrous Sodium Acetate (ASAc) into Concrete Pavement for Protection against Harmful Impact of Deicing Salt. Properties of Interfaced Materials and Films, JOM, 71:4899–4909 (2019). [Google Scholar]
  4. M.J.Al-Kheetan, S.H.Ghaffar, O.A., Madyana M.M. Rahman. Development of low absorption and high-resistant sodium acetate concrete for severe environmental conditions, Construction and Building Materials, 230: 117057 (2020). [CrossRef] [Google Scholar]
  5. G. Kılınççeker and C. Menekşe. The effect of acetate ions on the corrosion of reinforcing steel in chloride environments. Protection of Metals and Physical Chemistry of Surfaces, 51:659–666 (2015). [CrossRef] [Google Scholar]
  6. A. Abed, A. Mojtahedi and M. Lotfollahi-Yaghin. Factorial Mix Design for Properties Optimization and Modeling of Concrete Composites Incorporated Acetates as Admixtures. To be published, J. Sustainability (2023). [Google Scholar]
  7. P. Zhang and. L. Zong. Evaluation of Relationship between Water Absorption and Durability of Concrete Materials. Advances in Materials Science and Engineering, 2014, Article ID 650373 (2014). [Google Scholar]
  8. W. J. McCarter, G. Starrs, T. M Chrisp., P. A. M Basheer., S. V. Nanukuttan. & Srinivasan S. Conductivity/activation energy relationships for cement-based materials undergoing cyclic thermal excursions. Journal of Materials Science 50, 1129–1140 (2015). [CrossRef] [Google Scholar]
  9. A.M. Amr. The effect of mixing water temperature on concrete properties in hot weather conditions. 2017. American University in Cairo, Master’s Thesis. AUC Knowledge Fountain. https://fount.aucegypt.edu/etds/193. [Google Scholar]
  10. A.K. Mohamed, S.A. Weckwerth, R.K. Mishra, H. Heinz, R.J. Flatt. Molecular modeling of chemical admixtures; opportunities and challenges. Cement and Concrete Research 156, 106783 (2022). [CrossRef] [Google Scholar]
  11. D.-L. Li, D.-P.Zheng, D.-M Wang., J.-H. Zhao C. Du and C.F. Ren. Influence of Organic Esters on Portland Cement Hydration and Hardening. Advances in Materials Science and Engineering, volume 2018. https://doi.org/10.1155/2018/3203952. [Google Scholar]
  12. D. A. Silva, H.R Roman, P.J..P. Gleize. Evidences of chemical interaction between EVA and hydrating Portland cement. Cement and Concrete Research, 32(9) 1383-1390 (2002). [CrossRef] [Google Scholar]
  13. D. A. Silva and P. J. M. Monteiro. Analysis of C3A hydration using soft x-rays transmission microscopy: effect of EVA copolymer, J. Cement and Concrete Research 35, 2026–2032 (2005). [CrossRef] [Google Scholar]
  14. S. Zhuang, Q. Wang, M. Zhang. Water absorption behaviour of concrete: Novel experimental findings and model characterization. Journal of Building Engineering, 53, 104602 (2022). [CrossRef] [Google Scholar]
  15. S. Naganathan, K.N. Mustapha. Effect of Water Temperature on Concrete Properties. Jordan Journal of Civil Engineering 9(3),292-302 (2015). [CrossRef] [Google Scholar]
  16. Y. Wang, L. Li, M. An, Y. Sun, Z.Yu and H. Huang. Factors Influencing the Capillary Water Absorption Characteristics of Concrete and Their Relationship to Pore Structure. Appl. Sci. 12(4), 2211(2022). [CrossRef] [Google Scholar]
  17. R. Kiran, H. Samouh, G. Igarashi, T. Haji, T. Ohkubo, D.S.Tomita and I. Maruyama . Temperature-Dependent Water Redistribution from Large Pores to Fine Pores after Water Uptake in Hardened Cement Paste. Journal of Advanced Concrete Technology 18, 588-599, (2020). [CrossRef] [Google Scholar]
  18. M.J. Al-Kheetani, S.H. Ghaffar, S. Awad, M.Chougan, J. Byzyka and M.M. Rahman. Microstructural, Mechanical and Physical Assessment of Portland Cement Concrete Pavement Modified by Sodium Acetate under Various Curing Conditions, Infrastructures 6: 113 (2021). https://doi.org/10.3390/infrastructures6080113 [CrossRef] [Google Scholar]
  19. M. S. Hassan. SEM-Backscattered Imaging analysis of Cementitious Composite Matrix Incorporating Mineral Admixture. The 4th International Scientific Conference on Nanotechnology& Advanced Materials & Their Applications, (ICNAMA 2013)3-4 Nov. 2013. Eng. &Tech. Journal, 32, Part (B), 4, 696-703 (2014). [CrossRef] [Google Scholar]
  20. Y. Hu, L. Ma and T. He Effect of Mineral Admixtures on the Sulfate Resistance of High-Strength Piles Mortar. Materials, 13, 3500 (2020). [Google Scholar]
  21. H. El-didamony, A. Amer, M. Heikal, M. Shoaib. Effect of calcium acetate as an accelerator and water reducer on the properties of silica fume blended cement. Ceramics Silikaty 43(1):29-33 (1999). [Google Scholar]
  22. K. Cao, L. Wang, Y. Xu, W. Shen, H. Wang. The Hydration and Compressive Strength of Cement Mortar Prepared by Calcium Acetate Solution. Advances in Civil Engineering, 2021, Article ID 8817725 (2021). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.