EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 413 (2023) E3S Web Conf., 413 (2023) 02004 References
Open Access
Issue
E3S Web Conf.
Volume 413, 2023
XVI International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness - INTERAGROMASH 2023”
Article Number 02004
Number of page(s) 9
Section Agricultural Engineering and Mechanization
DOI https://doi.org/10.1051/e3sconf/202341302004
Published online 11 August 2023
  1. Naing Lin Aung, Phyo Wai Aung, O. V. Tatarnikov, Selection of the Optimal Load Bearing Wing Structure Scheme for an Unmanned Aerial Vehicle BMSTU Journal of Mechanical Engineering, 11, 89–95 (2020) doi:10.18698/0536-1044-2020-11-89-95 [Google Scholar]
  2. T. G. Ageeva, E. N. Dudar, S. V. Reznik, Complex method for designing wing construction of reusable spacecraft Tekhnologiya mashinostroeniya, 3, 34–36 (2021) [Google Scholar]
  3. Naing Lin Aung, O. V. Tatarnikov, Phyo Wai Aung, Multicriteria Optimization of Composite Wing of an Unmanned Aircraft BMSTU Journal of Mechanical Engineering, 11, 91–98 (2021) doi: 10.18698/0536-1044-2021-11-91-98 [Google Scholar]
  4. D. V. Vedernikov, A. N. Shanygin, Strength Analysis of Regional Aircraft Prospective Wing Structures Based on Parametric Models Aerospace MAI Journal, 29(2), 61–76 (2022) DOI: 10.34759/vst-2022-2-61-76 [Google Scholar]
  5. S. V. Reznik, A. S. Esetbatyrovich, Composite air vehicle tail fins thermal and stress–strain state modeling AIP Conf. Proc. 2318, 020012 (2021) doi: https://doi.org/10.1063/5.0036561 [CrossRef] [Google Scholar]
  6. T. A. Guzeva, G. V. Malysheva, Features of development of design-and-technological solutions during design of parts made of polymers and composites Russian metallurgy (Metally), 4, 34–41 (2022) doi: 10.31044/1684-2499-2022-0-4-35-41 [Google Scholar]
  7. B. Cheng, Flying of Insects, Bioinspired Structures and Design Cambridge, Cambridge University Press, 271–299 (2020) doi:10.1017/9781139058995.012 [CrossRef] [Google Scholar]
  8. L. Song, T. Gao, L. Tang, X. Du, J. Zhu, Y. Lin, G. Shi, H. Liu, G. Zhou, W. Zhang, An all-movable rudder designed by thermo-elastic topology optimization and manufactured by additive manufacturing Computers and Structures, 243, 106405 (2021) doi:10.1016/j.compstruc.2020.106405 [Google Scholar]
  9. K. Saito, H. Nagai, K. Suto, N. Ogawa, Y. Seong, T. Tachi, R. Niiyama, Y. Kawahara, Insect wing 3D printing Sci Rep, 11, 18631 (2021) doi: 10.1038/s41598-021-98242-y [Google Scholar]
  10. S. V. Baranovski, K. V. Mikhailovskiy, Selection and justification of polymer composite wing load-bearing elements design parameters with material anisotropy and airload IOP Conf. Ser.: Mater. Sci. Eng., 934, 012021 (2020) doi:10.1088/1757-899X/934/1/012021 [CrossRef] [Google Scholar]
  11. D. V. Sorokin, L. A. Babkina, O. V. Brazgovka, Designing various-purpose subassemblies based on topological optimization Spacecrafts & Technologies, 6(40), 61–82 (2022) doi: 10.26732/j.st.2022.2.01 [Google Scholar]
  12. S. V. Baranovski, K. V. Mikhailovskiy, The methods of designing an ultralight carbon fiber wing using parametrical modeling AIP Conference Proceedings, 2318, 020003 (2021) doi:10.1063/5.0036074 [CrossRef] [Google Scholar]
  13. J. H. Zhu, W. H. Zhang, L. Xia, Topology Optimization in Aircraft and Aerospace Structures Design Arch Computat Methods Eng, 23, 595–622 (2016) DOI 10.1007/s11831-015-9151-2 [Google Scholar]
  14. S. V. Baranovski, K. V. Mikhailovskiy, Topology optimization of polymer composite wing load-bearing element geometry TsAGI science journal, 50(3), 87–99 (2019) doi: 10.1615/TsAGISciJ.2019031136 [Google Scholar]
  15. S. A. Yurgenson, E. V. Lomakin, B. N. Fedulov, A. N. Fedorenko, Structural elements based on the metamaterials PNRPU Mechanics Bulletin, 4, 211–219 (2020) doi: 10.15593/perm.mech/2020.4.18 [CrossRef] [Google Scholar]
  16. A. Dubois, C. Farhat, A. H. Abukhwejah, Parameterization Framework for Aeroelastic Design Optimization of Bio–Inspired Wing Structural Layouts. 57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference (San Diego), 2016–0485,1–16 (2016) doi: 10.2514/6.2016–0485 [Google Scholar]
  17. A. V. Azarov, A. A. Babichev, A. F. Razin, Optimal design of an airplane wing composite lattice panel under axial compression Journal on Composite Mechanics and Design, 26(4), 490–500 (2020) doi 10.33113/mkmk.ras.2020.26.04.490_500.04 [Google Scholar]
  18. S. V. Baranovski, K. V. Mikhailovskiy, Structurally optimized polymer composite wing design. Part 1. Curvilinear load-bearing elements TsAGI Science Journal, 51(2), 79–86 (2020) doi: 10.1615/TsAGISciJ.2020035007 [Google Scholar]
  19. W. Zhao, R. K. Kapania, Bilevel Programming Weight Minimization of Composite Flying–Wing Aircraft with Curvilinear Spars and Ribs AIAA Journal, 57(6), 2594–2608 (2019) doi: 10.2514/1.J057892 [Google Scholar]
  20. B. K. Stanford, C. V. Jutte, C. A. Coker, Aeroelastic Sizing and Layout Design of a Wingbox through Nested Optimization AIAA Journal, 57(2), 476–481 (2019) doi: 10.2514/1.J057428 [Google Scholar]
  21. S. Doyle, J. Robinson, V. Ho, G. Ogawa, M. Baker, Aeroelastic Optimization of Wing Structure Using Curvilinear Spars and Ribs (SpaRibs) and SpaRibMorph 58th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, (Grapevine), 3,1–13 (2017) doi: 10.2514/6.2017–1303 [Google Scholar]
  22. K. V. Mikhailovskiy, S. V. Baranovski, The methods of designing a polymer composite wing using parametrical modeling. Part 1. The rationale for selecting wing geometry and the calculation of airloads BMSTU Journal of Mechanical Engineering, 11, 86–98 (2016) doi: 10.18698/0536-1044-2016-11-86-98 [Google Scholar]
  23. J. Hoffmann, S. Donoughe, K. Li, M. K. Salcedo, C. H. Rycroft, A simple developmental model recapitulates complex insect wing venation patterns Proceedings of the National Academy of Sciences, 115(40), 9905–9910 (2018) doi:10.1073/pnas.1721248115 [Google Scholar]
  24. M. K. Salcedo, J. Hoffmann, S. Donoughe, L. Mahadevan, Computational analysis of size, shape and structure of insect wings Biology open, 8(10), bio040774 (2019) doi:10.1242/bio.040774 [Google Scholar]
  25. B. Misof, S. Liu, K. Meusemann, R. S. Peters, A. Donath, C. Mayer, P. B. Frandsen, J. Ware, T. Flouri, R. G. Beutel, et al., Phylogenomics resolves the timing and pattern of insect evolution Science, 346, 763-767 (2014) doi:10.1126/science.1257570 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.