Open Access
Issue
E3S Web Conf.
Volume 413, 2023
XVI International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness - INTERAGROMASH 2023”
Article Number 02007
Number of page(s) 9
Section Agricultural Engineering and Mechanization
DOI https://doi.org/10.1051/e3sconf/202341302007
Published online 11 August 2023
  1. C. Mustafa, A. Emre, Characterization of carbon fiber-reinforced thermoplastic and thermosetting polyimide matrix composites manufactured by using various synthesized PI precursor resins Composites Part B: Engineering, 231(12), 109559 (2022) DOI: doi.org/10.1016/j.compositesb.2021.109559 [Google Scholar]
  2. Y. Wenli, W. Wu, X. Hu, G. Lin, J. Guo, H. Qu, L. Zhao, 3D printing of carbon nanotubes reinforced thermoplastic polyimide composites with controllable mechanical and electrical performance Composites Science and Technology, 182(9), 107671 (2019) DOI: doi.org/10.1016/j.compscitech.2019.05.028 [Google Scholar]
  3. H. Zuo, Y. Chen, G. Qian, F. Yao, H. Li, J. Dong, X. Zhao, Q. Zhang, Effect of simultaneously introduced bulky pendent group and amide unit on optical transparency and dimensional stability of polyimide film European Polymer Journal, 173(6), 111317 (2022) DOI: doi.org/10.1016/j.eurpolymj.2022.111317 [Google Scholar]
  4. I. P. Storozhuk, N. G. Pavlyukovich, A. L. Kotyukova, A. V. Polezhaev, Aapplication of polybutadiene–poly(tetramethyleneoxide) block copolymers to modify adhesive compositions Polymer Science D, 14(4), 504–507 (2021) [Google Scholar]
  5. A, Ramgobin, G. Fontaine, S. Bourbigot, Investigation of the thermal stability and fire behavior of high performance polymer: A case study of polyimide Fire Safety Journal, 120(3), 103060 (2021) DOI:doi.org/10.1016/j.firesaf.2020.103060 [Google Scholar]
  6. M. Hatami, Production of polyimide ceria nanocomposites by development of molecular hook technology in nano-sonochemistry Ultrasonics Sonochemistry, 44(6), 261–271 (2018) DOI: doi.org/10.1016/j.ultsonch.2018.02.032 [Google Scholar]
  7. Z. A. AlDawhi, I. I. BinSharfan, M. A. Abdulhamid Carboxyl-functionalized polyimides for efficient bisphenol A removal: Influence of wettability and porosity on adsorption capacity Chemosphere, 313(2), 137347 (2023) doi.org/10.1016/j.chemosphere.2022.137347 [Google Scholar]
  8. I. P. Storozhuk, N. G. Pavlukovich, A. V. Korobkina, G. G. Kagramanov, Polyarylate– poly(ethylene oxide) block copolymers for membrane separation of carbon dioxide from gas mixtures Membranes and Membrane Technologies, 2(2), 71–75 (2020) [Google Scholar]
  9. B. M. Rybin, Technology and equipment for protective and decorative coatings of wood and wood materials Moscow: Moscow State Forest University Publ., 568 (2003) [Google Scholar]
  10. A. C. Bejan, C. P. Constantin, M. D. Damaceanu, Evidence of diimide structure variation on overall performance of electro(fluoro)chromic devices integrating versatile triphenylamine-based polyimides Materialstoday: Chemistry, 26(12), 101100 (2022) DOI:doi.org/10.1016/j.mtchem.2022.101100 [Google Scholar]
  11. M. Pietsch, T. Rodlmeier, S. Schlisske, J. Zimmermann, C. Romero-Nieto, G. Hernandez-Sosa, Inkjet-printed polymer-based electrochromic and electrofluorochromic dual-mode displays Journal of Materials Chemistry, 7(23), 7121-7127 (2019) DOI: doi.org/10.1039/C9TC01344J [Google Scholar]
  12. H. J. Yen, G. S. Liou, Electrofluorochromic devices with the highest contrast ratio based on aggregation-enhanced emission (AEE)-Active cyanotriphenylamine-based polymers Chemical Communications, 49(84), 9797 (2013) DOI: doi.org/10.1039/c3cc45838e [Google Scholar]
  13. D. Lin, M. Jiang, S. Qi, D. Wu, Macromolecular structural evolution of polyimide chains during large-ratio uniaxial fiber orientation process revealed by molecular dynamics simulation Chemical Physics Letters, 756(10), 137847 (2020) DOI: doi.org/10.1016/j.cplett.2020.137847 [Google Scholar]
  14. A. N. Ivankin, A. N. Zarubina, A. S. Kulezenev, V. A. Kochetkov, A. V. Ustyugov, A polyelectrolyte sealant for fuel cells based on grafted fluorcopolymers Polymer Science D, 15(4), 608–612 (2022) [Google Scholar]
  15. F. Liu, S. Huang, B. Yang, Direct fabrication of single-phase multiferroic films on polyimide substrates for flexible memory Thin Solid Films, 758(9), 139424 (2022) DOI: doi.org/10.1016/j.tsf.2022.139424 [Google Scholar]
  16. T. H. Lee, B. K. Lee, C. Y. Jun, et al, Interface engineering in MOF/crosslinked polyimide mixed matrix membranes for enhanced propylene/propane separation performance and plasticization resistance Journal of Membrane Science, 667(2), 121182 (2023) DOI: doi.org/10.1016/j.memsci.2022.121182 [CrossRef] [Google Scholar]
  17. F. Topuz, M. A. Abdulhamid, G. Szekely, Superoleophilic oil-adsorbing membranes based on porous and nonporous fluorinated polyimides for the rapid remediation of oil spills Chemical Engineering Journal, 449(12), 137821 (2022) doi.org/10.1016/j.cej.2022.137821 [Google Scholar]
  18. S. A. Shah, R. Idrees, S. Saeed, A critical review on polyimide derived carbon materials for high-performance supercapacitor electrodes Journal of Energy Storage, 55C(11), 105667 (2022) DOI: doi.org/10.1016/j.est.2022.105667 [Google Scholar]
  19. Y. Luo, L. Ni, L. Shen, T. Sun, M. Liang, P. Liu, H. Zou, S. Zhou, Fabrication of rigid polyimide foams by adopting active crosslinking strategy Polymer, 256(11), 125220 (2022) DOI: doi.org/10.1016/j.polymer.2022.125220 [Google Scholar]
  20. I. Butnaru, C. P. Constantin, M. D. Damaceanu, Optimization of triphenylamine-based polyimide structure towards molecular sensors for selective detection of heavy/transition metal ions Journal of Photochemistry and Photobiology A: Chemistry, 435(2), 114271, (2023) doi.org/10.1016/j.jphotochem.2022.114271 [Google Scholar]
  21. V. A. Neluyb, G. V. Malysheva, I. A. Komarov, New technologies for producing multifunctional reinforced carbon plastics Materials Science Forum, 1037, 196–202 (2021) [Google Scholar]
  22. G. A. Gorbacheva, A. N. Ivankin, V. G. Sanaev, A. K. Ageev, D. P. Kiryukhin, G. A. Kichigina, P. P. Kushch, E. R. Badamshina, Surface modification of cellulose-containing materials with solutions of tetrafluoroethylene telomers Russian journal of applied chemistry, 90(8), 1365–1371 (2017) doi.org/10.1134/S1070427217080286 [Google Scholar]
  23. V. V. Korshak, S. A. Pavlova, L. V. Boiko, T. M. Babchinitser, S. V. Vinogradova, Y. S. Vygodskii, N. A. Golubeva, Viscometric and electron-microscope study of the polypyromellitimide of anilinephthalein Polymer Science U.S.S.R., 12(1), 63–72 (1970) doi.org/10.1016/0032-3950(70)90277-7 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.