EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 413 (2023) E3S Web Conf., 413 (2023) 02015 References
Open Access
Issue
E3S Web Conf.
Volume 413, 2023
XVI International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness - INTERAGROMASH 2023”
Article Number 02015
Number of page(s) 8
Section Agricultural Engineering and Mechanization
DOI https://doi.org/10.1051/e3sconf/202341302015
Published online 11 August 2023
  1. L. G. Voroshnin, L. S. Lyakhovich, Steel boriding, Moscow, Metallurgiya, 240 (1978) [Google Scholar]
  2. M. G. Krukovich, B. A. Prusakov, I. G. Sizov, Plasticity of borated layers, Moscow, Fizmatlit, 384 (2010) [Google Scholar]
  3. M. G. Krukovich, Ways to improve the operational properties of heterogeneous borated layers, New materials and technologies in mechanical engineering, 30, 47-50 (2019) [Google Scholar]
  4. M. G. Krukovich, Analysis of the mechanical properties of borated steels, New materials and technologies in mechanical engineering, 33, 24-28 (2021) [Google Scholar]
  5. M. G. Krukovich, E. A. Baderko, Modeling the growth kinetics of borated layers, New materials and technologies in mechanical engineering, 33, 28-32 (2021) [Google Scholar]
  6. V. O. Kostik, Formation of the microstructure of the borated layer on the surface of carbon structural and tool steels from coatings during furnace heating, Eastern European Journal of Advanced Technologies, 17, 63–64 (2005) [Google Scholar]
  7. T. V. Mustafina, G. A. Mustafin, I. V. Marshirov, Optimization of the process of borating cast iron during casting, Polzunovskiy Vestnik, 3, 15-19 (2015) [Google Scholar]
  8. M. G. Krukovich, Boriding from compact materials, New materials and technologies in mechanical engineering, 21, 40-45 (2015) [Google Scholar]
  9. T. M. Bykova, Influence of the base composition on the structure and properties of diffusion boride coatings, Strengthening technologies and coatings, 4, 3 – 7 (2013) [Google Scholar]
  10. L.S. Lyakhovich, Chemical and thermal treatment of metals and alloys: a reference book, Moscow, Metallurgy, 424 (1981) [Google Scholar]
  11. A. S. Pomelnikova, M. N. Shipko, M. A. Stepovich, Features of Structural Changes due to the Formation of the Boride Crystal Structure in Steels, Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques, 5(2), 298-304 (2011) [CrossRef] [Google Scholar]
  12. A. S. Pomelnikova, G. P. Fetisov, V. M. Zhuk, Structure Formaton in Boron-Rich Iron-Boron Compounds, Russian Metallurgy (Metally), 13, 1227-1230 (2016) [CrossRef] [Google Scholar]
  13. D. A. Ishmametov, A. S. Pomelnikova, A. A. Krasulya, Investigation of the structure and properties of the surface composite layer on vks-5 steel, Journal of Physics: Conference Series. -Ser. "Advances in Composites Science and Technologies 2020, ACST 2020", 012003 (2021) [Google Scholar]
  14. L. V. Baranova, Metallographic etching of metals and alloys: Ref. ed., Moscow, Metallurgy, 256 (1986) [Google Scholar]
  15. L. G. Petrova, V. A. Alexandrov, A. A. Berezhnoy, New possibilities of borating for obtaining modified layers on steel parts operating under wear and corrosion conditions, Uprochnyaya tekhnologii i pokrytiy, 10, 26-33 (2013) [Google Scholar]
  16. Yu. A. Balandin, Boron-nitriding of die steels, MiTOM, 9, 25–27 (2004) [Google Scholar]
  17. Yu. A. Balandin, Complex saturation of steel surfaces with boron, nitrogen and copper. Izvestiya vuzov. Engineering, 9, 39-42 (2004) [Google Scholar]
  18. V. F. Protasevich, G. V. Stasevich, Investigation of the features of the formation of boride coatings on carbonitrated low-carbon steel, Science and Technology, 3,7–10 (2012) [Google Scholar]
  19. A. S. Pomelnikova, O. Yu. Kozlova, S. V. Ovsepyan, M. V. Akhmedzyanov, Influence of high-temperature nitriding on the structure and properties of welded heat-resistant nickel alloys. Vestnik MGTU im. N.E. Bauman, 6, 33-42 (2016) [Google Scholar]
  20. A. S. Pomelnikova, G. P. Fetisov, S. A. Pakhomova, On the issue of hardening of variously alloyed steels by processing in a corona discharge, Technology of Metals, 2, 20-24 (2017) [Google Scholar]
  21. A. Muzaffar, N. Khudaykulov, Boriding of steel with technical boron carbide, Universum: technical sciences: electron. scientific magazine, 4(97) (2022) [Google Scholar]
  22. Q. Zheng, Investigation of the effect of boriding with rare earth elements on the properties of die steel H13, Fundamental problems of modern materials science, 19(3), 384-393 (2022) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.