EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 413 (2023) E3S Web Conf., 413 (2023) 02033 References
Open Access
Issue
E3S Web Conf.
Volume 413, 2023
XVI International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness - INTERAGROMASH 2023”
Article Number 02033
Number of page(s) 10
Section Agricultural Engineering and Mechanization
DOI https://doi.org/10.1051/e3sconf/202341302033
Published online 11 August 2023
  1. K.-U. Byuller, Teplo-i termostoykiye polimery; Per. s nem., Moscow, Khimiya, 1056 (1984) [Google Scholar]
  2. YU. A. Mikhaylin, Termoustoychivyye polimery i polimernyye materialy, Saint-Petersburg, TSOP Professiya, 480 (2013) [Google Scholar]
  3. YU. A. Mikhaylin, Teplo, termo i ognestoykost' polimernykh materialov. Saint-Petersburg, Izdatel'stvo: Nauchnyye osnovy i tekhnologii, 416 (2011) [Google Scholar]
  4. YU. A. Mikhaylin, Voloknistyye polimernyye kompozitsionnyye materialy v tekhnike. Saint-Petersburg, Izdatel'stvo: Nauchnyye osnovy i tekhnologii, 752 (2013) [Google Scholar]
  5. YU. A. Mikhaylin, Spetsial'nyye polimernyye kompozitsionnyye materialy. Saint-Petersburg.: NOT, 664 (2009) [Google Scholar]
  6. YU. A. Mikhaylin, Konstruktsionnyye polimernyye kompozitsionnyye materialy. Saint-Petersburg, NOT, 822 (2015) [Google Scholar]
  7. M. L. Kerber, i dr., pod red. akademika A.A. Berlina, Polimernyye kompozitsionnyye materialy: struktura, svoystva, tekhnologiya, Saint-Petersburg, TSOP Professiya, 640 (2018) [Google Scholar]
  8. M. L. Kerber, A. M. Bukanov, S. I. Vol'fson, I. YU. Gorbunova, L. B. Kandyrin, A. G. Sirota, M. A. Sheryshev, Fizicheskiye i khimicheskiye protsessy pri pererabotke polimerov, Saint-Petersburg, Izdatel'stvo: Nauchnyye osnovy i tekhnologii, 320 (2013) [Google Scholar]
  9. A. S. Borodulin, A. N. Kalinnikov, at all., New Polymeric Binders for the Production of Composit. – Materials Today: Procttdings, 11, 139–143 (2019) [CrossRef] [Google Scholar]
  10. M. I. Bessonov, M. M. Koton, V.V. Kudryavtsev, L. A. Layus, Poliimidy -klass termostoykikh polimerov, Nauka, 328 (1983) [Google Scholar]
  11. J. M. Sonnett, T. P. Gannett, Chemistry and Kinetics of Polyimide Formation. in Polyimides: Fundamentals and Applications, New York: Marcel Dekker, 151 (1996) [Google Scholar]
  12. A. S. Borodulin, A. N. Kalinnikov, A. G. Tereshkov, S. S. Musica, Polyetherimides for the creation of heat-resistant polymer composite materials with high physical and mechanical properties. Vestnik BGTU im. V.G. Shukhov, 11, 94–100 (2019) [Google Scholar]
  13. I. P. Storozhuk, N. G. Pavlukovich, A. S. Borodulin, A. N. Kalinnikov, V. M. Alekseev, Thermoplastic Polyetherimides and Copolyimides for Heat-Resistant Composite Materials, AIP Conference Proceedings, 2503. 060011 (2022) DOI: 10.1063/5.0119920 [CrossRef] [Google Scholar]
  14. R. Giesa, H.-W. Schmidt, Soluble Polyimides, Encyclopedia of Materials: Science and Technology, 8750-8752 (2001) [Google Scholar]
  15. S. V. Vinogradova, V. A. Vasnev, YA. S. Vygodskiy, Kardovyye poligeteroarileny. Sintez, svoystva i svoyeobraziye / Uspekhi khimii, 65(3), 266–295 (1996) [Google Scholar]
  16. I. A. Novakov, B. S. Orlinson, R. V. Brunilin, Ye. A. Potayenkova, Zayavl Pat. RF 2409599, MPK C08G 73/10. Poliimidy i sopoliimidy, prednaznachennyye dlya izgotovleniya gidroliticheski ustoychivykh poliimidnykh materialov, 27.04.09, 2 (2017) [Google Scholar]
  17. H. Wei, Y. Deyue, L. Qinghua, H. Yue, Synthesis and characterization of highly soluble fluorescent main chain copolyimides containing perylene units, European Polymer Journal, 39, 1099–1104 (2003) [CrossRef] [Google Scholar]
  18. E. M. Maya, A. E. Lozano, J. de Abajo, J. G. de la Campa, Chemical modification of copolyimides with bulky pendent groups: effect of modification on solubility and thermal stability, Polymer Degradation and Stability, 92, 2294–2299 (2007) [CrossRef] [Google Scholar]
  19. D. A. Sapozhnikov, B. A. Bayminova, A. V. Chuchalova, S. L. Semenov, A. F. Kosolapov, O. N. Zabegayeva, YA. S. Vygodskiy, Sintez organorastvorimykh poliimidov i zashchitnyye pokrytiya svetovodov na ikh osnove, Vysokomolekulyarnyye soyedineniya, 62(1), 44–52 (2020) [Google Scholar]
  20. G. Yuan-Zheng, S. Deng-xiong, N. Hong-jiang, L. Jin-gang, Y. Shi-yong, Organosoluble semi-alicyclic polyimides derived from 3,4-dicarboxy-1,2,3,4-tetrahydro-6-tert-butyl-1-naphthalene succinic dianhydride and aromatic diamines: Synthesis, characterization and thermal degradation investigation, Progress in Organic Coatings, 76, 768–777 (2013) [Google Scholar]
  21. E. Schab-Balcerzak, D. Sek, A. Volozhin, T. Chamenko, B. Jarzazbek, Synthesis and characterization of organosoluble aliphatic–aromatic copolyimides based on cycloaliphatic dianhydride, European Polymer Journal, 38, 423–430 (2002) [CrossRef] [Google Scholar]
  22. J. Lee, S. Yoo, D. Kim, Y. H. Kim, S. Park, N. K. Park, Y. So, Intrinsic low-dielectric constant and low-dielectric loss aliphatic-aromatic copolyimides: The effect of chemical structure / Materials Today Communications, 33, 104479 (2022) [Google Scholar]
  23. S. Xu, M. Yang, Synthesis and optical properties of two series of soluble acridine-containing copolyimides, Polymer, 48, 2241–2249 (2007) [CrossRef] [Google Scholar]
  24. Q. Zhang, X. Li, J. Dong, X. Zhao, Chapter 6: High-performance polyimide fibers, Advanced Industrial and Engineering Polymer Research, 5, 107–116 (2022) [CrossRef] [Google Scholar]
  25. S. Tamai, H. Oikawa, M. Ohta, A. Yamaguchi, Melt processable copolyimides based on 4,4'-bis(3-aminophenoxy)biphenyl , Polymer, 39(10), 1945-1949 (1998) [CrossRef] [Google Scholar]
  26. L. R. Sidra, G. Chen, N. Mushtaq, L. Xu, High Tg, melt processable copolyimides based on isomeric 3,3′ and4,4′-hydroquinone diphthalic anhydride (HQDPA) Polymer (2018) doi: 10.1016/j.polymer.2017.12.060. [Google Scholar]
  27. H. Ohya, V. V. Kudryavtsev, S. I. Semenova, Polyimide Membranes: Applications, Fabrications, and Properties. Tokyo: Kodansha Ltd, 328 (1997) doi.org/10.1201/9780203742969 [Google Scholar]
  28. N. N. Fateev, V. I. Solomakhin, B. A. Baiminov, A. V. Chuchalov, D. A. Sapozhnikov, Ya. S. Vygodskii, Gas-Transport Properties of Polyimides with Various Side Groups, Polymer Science, Series C, 62, 266–272 (2020) [CrossRef] [Google Scholar]
  29. D.-J. Liaw, K.-L. Wang, Y.-C. Huang, K.-R. Lee, J.-Y. Lai, C.-S. Ha, Advanced polyimide materials: Syntheses, physical properties and applications. Progress in Polymer Science, 37(7), 907–974 (2012) doi:10.1016/j.progpolymsci.2012.02.005 [CrossRef] [Google Scholar]
  30. Yi-Ch. Wang, S.-H. Huang, C.-C. Hu, C.-L. Li, K.-R. Lee, D.-J. Liaw, J.-Y. Lai, Sorption and transport properties of gases in aromatic polyimide membranes. J. Membr. Sci., 248(1–2), 15–25 (2005) doi.org/10.1016/j.memsci.2004.09.01 [Google Scholar]
  31. A. Hayek, G. O. Yahaya, A. Alsamah, A. A. Alghannam, Pure -and sour mixed-gas transport properties of4,4′-methylenebis(2,6-diethylaniline)-based copolyimide membranes, Polymer, 166, 184–195 (2019) doi.org/10.1016/j.polymer.2019.01.056. [CrossRef] [Google Scholar]
  32. I. P. Storozhuk, V. M. Alekseev, N. G. Pavlukovich, A. S. Borodulin, A. N. Kalinnikov, A. V. Polezhaev, Thermoplastic polyether sulfones for composite materials reinforced with fabrics, Journal of physics: conference series, 1990 (2021) 012038. DOI 10.1088/1742-6596/1990/1/012038 [CrossRef] [Google Scholar]
  33. I. P. Storozhuk, A. N. Kallinnikov, A. S. Borodulin, N. G. Pavlukovich, V. M. Alekseev, Polyarylene ether ketone copolymers and their primary properties. Journal of physics: conference series, 1990, 012033 (2021) DOI 10.1088/1742-6596/1990/1/012033 [CrossRef] [Google Scholar]
  34. I. P. Storozhuk, V. M. Alekseev, A. N. Kalinnikov, A. S. Borodulin, Chemically modified polysulfones and their properties. Polymer Science -Series D., 14(4), 580-587 (2021) [CrossRef] [Google Scholar]
  35. A. S. Borodulin, A. N. Kalinnikov, A. M. Kharaev, at all., Aromatic polysulfone to create polymer materials with high resistance to frost, IOP Conf. Series: Earth and Environmental Science, 302, 1-5 (2019) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.