Open Access
| Issue |
E3S Web Conf.
Volume 413, 2023
XVI International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness - INTERAGROMASH 2023”
|
|
|---|---|---|
| Article Number | 02034 | |
| Number of page(s) | 7 | |
| Section | Agricultural Engineering and Mechanization | |
| DOI | https://doi.org/10.1051/e3sconf/202341302034 | |
| Published online | 11 August 2023 | |
- N. I. Baurova, V. A. Zorin, The use of polymer composite materials in production and repair of machines: Textbook, Moscow, MADI Publ., 264 (2016) [Google Scholar]
- A. G. Bratukhin, V. S. Bogolyubov, O. S. Sirotkin, Technology for manufacture of products and integral structures from composite materials in the mechanical engineering, Scientific editors: Moscow, Gotika Publ., 516 (2003) [Google Scholar]
- Yu. A. Mikhaylin, Fibrous polymeric composite materials in engineering, Saint Petersburg, Izdatelstvo “Nauchnye OsnovyiTekhnologii” Publ., 720 (2013) [Google Scholar]
- S. L. Bazhenov, A. A. Berlin, A. A. Kulkov, V. G. Oshmyan, Polymer composite materials, Dolgoprudny, IzdatelskiyDom “Intellekt” Publ., 352 (2010) [Google Scholar]
- L. P. Kobets, A. S. Borodulin, G. V. Malysheva, Study of microcapillary impregnation of carbon fiber by epoxy binder. Fiber Chemistry, 48(4), 311−315(2016) [CrossRef] [Google Scholar]
- A. S. Borodulin, A. N. Kalinnikov, Super engineering polyesters: synthesis and performance characteristics. JOP Conference Series: Materials Science and Engineering, 709(2), 022038 (2020) [CrossRef] [Google Scholar]
- A. S. Borodulin, A. Kalinnikov, A. Kharaev, S. Shcherbin, Aromatic polysulfone to create polymer materials with high resistance to frost JOP Conference Series: Materials Science and Engineering, 302(1), 012062 (2019) [Google Scholar]
- P. P. Maung, T. L. Htet, G. V. Malysheva, Simulation and optimization of vacuum assisted resin infusion process for large-sized structures made of carbon fiber-reinforced plastic, JOP Conference Series: Materials Science and Engineering, 709(2), 022041 (2020) [CrossRef] [Google Scholar]
- V. A. Nelyub, B. L. Gorberg, M. V. Grishin, A. A. Berlin, G. V. Malysheva, Properties and technology of applying metal coatings to carbon tape, Fiber Chemistry, 50(6), 524-527 (2019) [CrossRef] [Google Scholar]
- C. Yanyan, V. A. Nelyub, G. V. Malysheva, An investigation of the kinetics of the heating process for parts made of carbon fiber in the process for parts made of carbon fiber in the process of curing. Polymer Science-Series D, 12(3), 296-299 (2019) [CrossRef] [Google Scholar]
- A. S. Borodulin, A. N. Marycheva, G. V. Malysheva, Simulation of impregnation kinetics of fabric fillers in the production of fiberglass articles. Glass Physics and Chemistry, 41(6), 660-664 (2015) [CrossRef] [Google Scholar]
- N. I. Baurova, Surface structure of fractured carbon-fiber composites before and after climatic aging. Fiber Chemistry, 46(4), 241-244 (2014) [CrossRef] [Google Scholar]
- V. A. Nelyub, Improving the quality of molding carbon plastics based on epoxy binders and metallized reinforcing fibrous materials using vacuum infusion technology, Klei. Germetiki. Tekhnologii – Polymer Science. Series D, 9, 40−43(2020) [Google Scholar]
- Yu. A. Gorbatkina, V. G. Ivanova-Mumzhieva, Adhesion of modified epoxies to fibers, Moscow, TORUS PRESS Publ., 216 (2018) [Google Scholar]
- V. A. Nelyub, Adhesive strength evaluation via the pull-out method in a binder elementary system at various treatments of filaments. Polymer Science-Series D., 11(3), 263-266 (2018) [CrossRef] [Google Scholar]
- S. Zhandarov, E. Pisanova, E. Mäder, J. A. Nairn, Investigation of load transfer between the fiber and the matrix in pull-out test with fibers having different diameters. J AdhesSciTechnol, 15, 205-220 (2001) [Google Scholar]
- S. F. Zhandarov, E. Mäder, O. R. Yurkevich, Indirect estimation of fiber/polymer bond strength and interfacial friction from maximum load values recorded in the microbond and pull-out tests. Part I: Local bond strength. J AdhesSciTechnol, 16, 1171–2000 (2002) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.