Open Access
E3S Web Conf.
Volume 413, 2023
XVI International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness - INTERAGROMASH 2023”
Article Number 02042
Number of page(s) 9
Section Agricultural Engineering and Mechanization
Published online 11 August 2023
  1. V. V. Ayupov, Mathematical modeling of technical systems: textbook, Ministry of Agriculture of RF, Federal state budgetary education. institution of higher education “Perm State Agricultural Academy named after D.N. Pryanishnikov”. Perm: CPI “Prokrost”, ISBN 978-5-94279-337-1, 242 (2017) [Google Scholar]
  2. B. Li, Coordinated control of gear shifting process with multiple clutches for power-shift transmission, Mech. Mach. Theory, 140, 274-291 (2019) [CrossRef] [Google Scholar]
  3. N. K. Kuznetsov, Reducing of dynamic loads of excavator actuators J. of Physics: Conference Series, IOP Publishing, 1, 012075 (2019) [Google Scholar]
  4. Z. A. Gojaev, V. I. Pryadkin, A.V. Artemov, P. A. Kolyadin, Evaluation of the influence of tire parameters on the controllability of the car, Automotive industry 2, 14-19 EDN NUYPUI (2023) [Google Scholar]
  5. Z. A. Gojaev, The use of adaptive running systems for springing MES to reduce vibration activity from the support surface, Fundamental and applied problems of engineering and technology 6(356), 138-142 (2022)doi 10.33979/2073-7408-2022-356-6-138-142 [Google Scholar]
  6. O. I. Polivaev, O. S. Vedrinsky, N. M. Derkanosova, Increasing the durability of tractor coupling due to the elastic-friction damper, Science and education in modern conditions: materials of the international scientific conference, under the general editorship: Voronezh: Voronezh State Agrarian University named after Emperor Peter I, 226-230 (2016) [Google Scholar]
  7. V. N. Loy, A. O. Germanovich, Evaluation of the vibration load of the workplace of the operator of a mobile chopping machine, Proceedings of BSTU. No. 2. Forestry and woodworking industry 2(175), 3-7 (2015) [Google Scholar]
  8. I. Melikov, Traction and energy efficiency tests of oligomeric tires for category 3 tractors, IOP Conference Series: Earth and Environmental Science, 403, 012126 (2019) doi: [CrossRef] [Google Scholar]
  9. V. Dygalo, Formation of basic performance properties of wheeled vehicles in braking mode, Transportation Research Procedia : 14, Saint Petersburg, 130-135 (2020) doi 10.1016/j.trpro.2020.10.016. [CrossRef] [Google Scholar]
  10. V. V. Shekhovtsov, Technology of creation of three-dimensional model of tractor transmission in program package "universal mechanism, Lecture Notes in Mechanical Engineering, 9783319956299, 2017-2025 (2019) doi 10.1007/978-3-319-95630-5_217. [Google Scholar]
  11. E. A. Fedyanov, N. S. Sokolov-Dobrev, M. V. Ljashenko, Method of determining operation parameters of stand tests of vehicle suspension elements under conditions of ultra-low temperatures, Journal of Physics: Conference Series, Tomsk, 032126 (2018) doi 10.1088/1742-6596/1015/3/032126. [CrossRef] [Google Scholar]
  12. V. Shekhovtsov, M. Lyashenko, P. Potapov, Calculated and experimental tests of dynamic vibration isolators for use in the suspension system of the traction vehicle cabin, IOP Conference Series: Materials Science and Engineering : Design Technologies for Wheeled and Tracked Vehicles, MMBC 2019, Moscow, Moscow: Institute of Physics Publishing, 012022 (2020) doi 10.1088/1757-899X/820/1/012022. [Google Scholar]
  13. D. Ilyushin, Ye. A. Salykin, V. Shekhovtsov, Special aspects of the test of ATV equipped with the electronic engine management system Continental M3C on a dynamometer test bench, IOP Conference Series: Materials Science and Engineering : Design Technologies for Wheeled and Tracked Vehicles, MMBC 2019, Moscow, Institute of Physics Publishing, 012011 (2020) doi 10.1088/1757-899X/820/1/012011. [Google Scholar]
  14. P. J. T. Venhovens, The Development and Implementation of Adaptive Semi-Active Suspension Control*, Veh. Syst. Dyn. 23(1), 211–235 (1994) [CrossRef] [Google Scholar]
  15. O. Prentkovsky, R. Pechelyunas, Dynamics of transcontinental distribution in memory, Materials of the International Conference RelStat'04. Part 3. Transport and telecommunications 6(3), 407 (2005) [Google Scholar]
  16. S. Senkevich, V. Bolshev, E. Ilchenko, P. Chakrabarti, M. Jasiński, Z. Leonowicz, M. Chaplygin. Elastic Damping Mechanism Optimization by Indefinite Lagrange Multipliers, IEEE Access, 9, 71784-71804 (2021) doi: 10.1109/ACCESS.2021.3078609 [CrossRef] [Google Scholar]
  17. R. M. Chalasani, Ride performance potential of active suspension systems - Part II: Comprehensive Analysis Based On A Full-Car Model. Am. Soc. Mech. Eng. Appl. Mech. Div. AMD. 80, 205–234 (1986) [Google Scholar]
  18. Z. A. Godzhaev, S. E. Senkevich, V. A. Zubina, T. Z. Godzhaev, Determination of the significance of quality criteria and functional limitations affecting the effectiveness of robotization of mobile energy means in crop production. IOP Conf. Ser.: Earth Environ. Sci., 1138, 012045 (2023) doi: 10.1088/1755-1315/1138/1/012045 [CrossRef] [Google Scholar]
  19. R. A. Williams, Electronically controlled automotive suspensions Comput. Control Eng. J., 5(3), 143–148. (1994) [CrossRef] [Google Scholar]
  20. C. Gohrle, et al., Design and Vehicle Implementation of Preview Active Suspension Controllers, IEEE Trans. Control Syst. Technol., 22(3), 1135–1142 (2014) [CrossRef] [Google Scholar]
  21. A. A. Khachaturov, Dynamics of the road – tire – car–driver system, Moscow, Mechanical Engineering, 535 (1976) [Google Scholar]
  22. Z. A. Gojaev, Vibration protection of the hydraulic system of springing mobile machines with the use of active regulation by a neural network , Tractors and agricultural machines, 4, 43-49 (2019) doi 10.31992/0321-4443-2019-4-43-49. – EDN OZQAPF. [Google Scholar]
  23. G. M. Kutkov, Theory of tractor and automobile: textbook for universities, Moscow, Kolos, 271-279 (1996) [Google Scholar]
  24. B. A. Afanasyev, B. N. Belousov, L. F. Zheglov, Designing four-wheel drive wheeled vehicles: Textbook for universities: P79 In 3 t. t., etc.; Moscow, Publishing House of Bauman Moscow State Technical University, 432 (2008) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.