Open Access
Issue |
E3S Web Conf.
Volume 413, 2023
XVI International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness - INTERAGROMASH 2023”
|
|
---|---|---|
Article Number | 04015 | |
Number of page(s) | 8 | |
Section | Green Chemistry and Sustainable Technologies | |
DOI | https://doi.org/10.1051/e3sconf/202341304015 | |
Published online | 11 August 2023 |
- J. Wang, S. R. SATa, P. C. Lynch, G. Manogharan, Design and topology optimization of 3D-printed wax patterns for rapid investment casting (2019) doi: 10.1016/j.promfg.2019.06.224 [Google Scholar]
- K. Altaf, A. M. A. Rani, D. E. Woldemichael, T. A. Lemma, C. Z. Jian, M. H. Fiqri, Application of additive manufacturing/3D printing technologies and investment casting for prototype development of polycrystalline diATond compact (PDC) drill bit body, ARPN J. Eng. Appl. Sci. (2016) [Google Scholar]
- A. G. Amosov, Classification indicators of maintainability of technical systems, Paper presented at the AIP Conference Proceedings, 2402 (2021) doi:10.1063/5.0071519 [Google Scholar]
- M. O. Kaptakov, Synthesis and Characterization of Polymer Composite Materials Based on Polyethylene and CuO Nanoparticles, AIP Conference Proceedings, 2402, 020027 (2021) [CrossRef] [Google Scholar]
- M. O. Kaptakov, Effect of Ultrasonic Treatment on Stability of TiO2 Aqueous Dispersions in Presence of Water-Soluble Polymers, International Journal of Pharmaceutical Research, 12(2), 1821-1824 (2020) [Google Scholar]
- A. G. Amosov, Curvilinear trajectory of track machines, Paper presented at the AIP Conference Proceedings, 2402 (2021) doi:10.1063/5.0071513 [Google Scholar]
- A. N. Tarasova, Effect of Reagent Concentrations on Equilibria in Water-Soluble Complexes, International Journal of Pharmaceutical Research, 12(2), 1169-1172 (2020) [Google Scholar]
- E. Y. Churakova, An analytical method for determining the scope of checks for the reliability of medical devices using parametric models, Paper presented at the AIP Conference Proceedings, 2467 (2022) doi:10.1063/5.0092792 [Google Scholar]
- M. V. Kapitonov, Relative slippage during the modulation of interaction of a pneumatic tire with a bearing surface. Paper presented at the Transportation Research Procedia, 61, 561-566 (2022) doi:10.1016/j.trpro.2022.01.091 [CrossRef] [Google Scholar]
- E. S. Almaghariz, et al., Quantifying the role of part design complexity in using 3d sand printing for molds and cores, Int. J. Met. (2016) doi: 10.1007/s40962-016-0027-5 [Google Scholar]
- A. G. Amosov, T. I. Mirolyubova, Review of methods for calculating the cross-country ability of heavy road trains in off-road conditions. Paper presented at the Transportation Research Procedia, 61, 206-212 (2022) doi:10.1016/j.trpro.2022.01.034 [CrossRef] [Google Scholar]
- A. N. Tarasova, Effect of Vibration on Physical Properties of Polymeric Latexes, International Journal of Pharmaceutical Research, 12(2), 1173-1180 (2020) [Google Scholar]
- E. V. Mikhailova, Determination of test reliability using parametric models, Paper presented at the AIP Conference Proceedings, 2402 (2021) doi:10.1063/5.0071632 [Google Scholar]
- E. V. Mikhailova, Parametric restrictions on industrial cleanliness of technological equipment in mechanical engineering, Paper presented at the Journal of Physics: Conference Series, 1889(4) (2021) doi:10.1088/1742-6596/1889/4/042063 [Google Scholar]
- V. A. Golikov, Method for analytical evaluation and control of technical state of engineering products, Paper presented at the AIP Conference Proceedings, 2467 (2022) doi:10.1063/5.0092789 [Google Scholar]
- M. V. Kapitonov, Evaluation and analysis of risks in automotive industry. Paper presented at the Transportation Research Procedia, 61, 556-560 (2022) doi:10.1016/j.trpro.2022.01.090 [CrossRef] [Google Scholar]
- G. Khotina, E. Churakova, Automation methodology of the surface creation of products thin-walled shell, Paper presented at the Journal of Physics: Conference Series, 1889(2), (2021) doi:10.1088/1742-6596/1889/2/022113 [Google Scholar]
- C. Mendonsa, V. D. Shenoy, Additive Manufacturing Technique in Pattern making for Metal Casting using Fused FilATent Fabrication Printer, J. Basic Appl. Eng. Res. Print, (2014) [Google Scholar]
- T. Dikova, K. Bliznakova, VII th International Metallurgical Congress, ENVIRONMENT, no. June (2016) [Google Scholar]
- V. A. Golikov, Classification of indicators of reliability of systems in heavy engineering, Paper presented at the Journal of Physics: Conference Series, 1889(4) (2021) doi:10.1088/1742-6596/1889/4/042069 [Google Scholar]
- M. V. Kapitonov, Mathematical model of the kinematics of turning of wheeled construction equipment with real and ideal control systems for steering the wheels of a semi-trailer, Paper presented at the AIP Conference Proceedings, 2402 (2021) doi:10.1063/5.0071308 [Google Scholar]
- A. G. Amosov, Comparative analysis of requirements for industrial cleanliness in mechanical engineering, Paper presented at the Journal of Physics: Conference Series, 1889(4) (2021) doi:10.1088/1742-6596/1889/4/042033 [Google Scholar]
- A. Vokhidov, E. Churakova, Problems of ensuring the operation of load units of irrigation stations and large mechanical units, Journal of the Balkan Tribological Association, 27(5), 838-847 (2021) [Google Scholar]
- D. Safaeian, M. Vaezi, Investment casting of gas turbine blade by used of rapid technologies, Aust. J. Basic Appl. Sci. (2009) [Google Scholar]
- V. A. Golikov, A. G. Amosov, S. Čapulis, Parametric decomposition of failure criticality of complex technical systems. Journal of Advanced Research in Dynamical and Control Systems, 12(7), 984-987 (2020) doi:10.5373/JARDCS/V12SP7/20202192 [CrossRef] [Google Scholar]
- A. G. Amosov, V. A. Golikov, M. V. Kapitonov, F. V. Vasilyev, O. K. Rozhdestvensky, Engineering and analytical method for estimating the parametric reliability of products by a low number of tests. Inventions, 7(1) (2022) doi:10.3390/inventions7010024 [CrossRef] [Google Scholar]
- J. wu Kang, Q. xian Ma, The role and impact of 3D printing technologies in casting, China Foundry (2017) doi: 10.1007/s41230-017-6109-z. [Google Scholar]
- A. Rajic, E. Desnica, I. Palinkas, D. Nedelcu, L. L. Vulicevic, 3D printing technology with plastic materials for hip implant master patterns manufacturing, Mater. Plast., (2019) doi:10.37358/mp.19.4.5280. [Google Scholar]
- N. Roussel, Numerical simulations of concrete processing: From standard formative casting to additive manufacturing [Google Scholar]
- V. A. Golikov, Maintainability of individual assembly units in mechanical engineering. Paper presented at the AIP Conference Proceedings, 2402 (2021) doi:10.1063/5.0071634 [Google Scholar]
- A. G. Amosov, Comparative analysis of materials of loading devices of machine building, Paper presented at the AIP Conference Proceedings, 2467 (2022) doi:10.1063/5.0092787 [Google Scholar]
- M. V. Kapitonov, Course-keeping ability of heavy transport units with an arbitrary number of links. Paper presented at the AIP Conference Proceedings, 2402 (2021) doi:10.1063/5.0071336 [Google Scholar]
- K. V. Wong, A. Hernandez, A review of additive Manufacturing, ISRN Mech Engg (2012) [Google Scholar]
- V. A. Golikov, E. E. Vlasova, Computational analysis and decomposition of the “Vehicle-terrain” system for off-road areas. Paper presented at the Transportation Research Procedia, 61, 213-218 (2022) doi:10.1016/j.trpro.2022.01.035 [CrossRef] [Google Scholar]
- C. W. Lee, Chua, Rapid investment casting: direct and indirect Approaches via fused deposition modelling, The international Journal of advanced Manufacturing Technology, 23(1-2), 93-101 [Google Scholar]
- A. G. Amosov, Special software application for antenna modelling in mechanical engineering, Paper presented at the Journal of Physics: Conference Series, 1889(4) (2021) doi:10.1088/1742-6596/1889/4/042031 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.