EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 414 (2023) E3S Web Conf., 414 (2023) 02011 References
Open Access
Issue
E3S Web Conf.
Volume 414, 2023
2nd International Conference “SUstainable PolyEnergy generation and HaRvesting – SUPEHR23”
Article Number 02011
Number of page(s) 10
Section Thermal and Electrical Hybrid Systems – Sustainable Power Plants
DOI https://doi.org/10.1051/e3sconf/202341402011
Published online 25 August 2023
  1. Regulation of the UE parliament and Council 2021/0197 (COD): COM(2021) 556 final. [Google Scholar]
  2. J. M. Cunningham, M. A. Hoffman, D. J. Friedman, A Comparison of High-Pressure and Low-Pressure Operation of PEM Fuel Cell Systems, SAE 2001 World Congress, Detroit, 2001-01-0538 (2001) [Google Scholar]
  3. W. K. Galen, A. H. Myron, A Comparison of Two Air Compressors for PEM Fuel Cell Systems, Virginia: Virginia Polytechnic Institute and State University (2001) [Google Scholar]
  4. B. Blunier, A. Miraoui, Proton exchange membrane fuel cell air management in automotive applications, Journal of Fuel Cell Science and Technology, 7, 4, p. 727 (2010) [CrossRef] [Google Scholar]
  5. C. Bao, M. Ouyang, B. Yi, Modeling and optimization of the air system in polymer exchange membrane fuel cell systems, Journal of Power Sources, 156, 2, pp. 232–243 (2006) [CrossRef] [Google Scholar]
  6. A. Kerviel, A. Pesyridis, A. Mohammed, D. Chalet, An evaluation of turbocharging and supercharging options for high-efficiency fuel cell electric vehicles, Applied Sciences, 8, 12, p. 2474 (2018) [CrossRef] [Google Scholar]
  7. M. Venturi, J. Sang, A. Knoop, G. Hornburg, Air supply system for automotive fuel cell application, In SAE Technical Paper Series, SAE International (2012) [Google Scholar]
  8. S. Lück, M. Schödel, M. Menze, J. Göing, J. R. Seume, J. Friedrichs, Impact of Compressor and Turbine Operating Range Extension on the Performance of an Electric Turbocharger for Fuel Cell Applications, In Turbo Expo: Power for Land, Sea, and Air, Vol. 86052, p. V007T18A020 (2022) [Google Scholar]
  9. K. Iwakiri, M. Furukawa, S. Ibaraki, I. Tomita, Unsteady and Three-dimensional Flow Phenomena in a Transonic Centrifugal Compressor Impeller at Rotating Stall, Proceedings of ASME Turbo Expo 2009, GT2009-59516 (2009) [Google Scholar]
  10. I. Tomita, S. Ibaraki, M. Furukawa, K. Yamada, The Effect of Tip Leakage Vortex for Operating Range Enhancement of Centrifugal Compressor, ASME Journal of Turbomachinery, Vol. 135, No.3, 051020 (2013) [CrossRef] [Google Scholar]
  11. J. N. Everitt, Z. S. Spakovszky, An investigation of stall inception in Centrifugal compressor vaned diffuser, ASME J. of Turbomachinery, Vol 135, 011025-1–10 (2013) [CrossRef] [Google Scholar]
  12. Y. Liu, B. Liu, Investigation of unsteady impeller-diffuser interaction in a transonic centrifugal compressor stage, ASME Turbo Expo 2010, ASME Paper GT2010-22737 (2010) [Google Scholar]
  13. K. Yamada, M. Furukawa, H. Arai, D. Kanazaki, Evolution of Reverse Flow in a Transonic Centrifugal Compressor at Near-surge, Proceedings of ASME Turbo Expo 2017, GT2017-63568 (2017) [Google Scholar]
  14. T. Ceyrowsky, A. Hildebrandt, R. Schwarze, Numerical investigation of the circumferential pressure distortion induced by a centrifugal compressor’s external volute, ASME Turbo Expo 2018, ASME paper GT2018-75919 (2018) [Google Scholar]
  15. C. Rodgers, Centrifugal Compressor Inlet Guide Vanes for Increased Surge Margin, J. Turbomach., 113, 696–702 (1991) [CrossRef] [Google Scholar]
  16. M. Ishida, D. Sakaguchi, H. Ueki, Effect of Pre-Swirl on Unstable Flow Suppression in a Centrifugal Impeller with Ring Groove Arrangement, In Proceedings of the ASME Turbo Expo: Power for Land, Sea, and Air, Barcelona, Spain, 8–11 May 2006, GT2006-90400. p. 90400 (2006) [Google Scholar]
  17. B. Nikpour, Turbocharger Compressor Flow Range Improvement for Future Heavy Duty Diesel Engines, In Proceedings of the THIESEL 2004 Conference on Thermoand Fluid Dynamic Processes in Diesel Engines, 7–10 September 2004, Valencia, Spain, (2004) [Google Scholar]
  18. J. Xiao, W. Xu, C. Gu, X. Shu, Self-recirculating casing treatment for a radial compressor, Chin. J. Mech. Eng., 22, 567–573 (2009) [CrossRef] [Google Scholar]
  19. S. Sivagnanasundaram, S. Spence, J. Early, B. Nikpour, An impact of Various Shroud Bleed Slot configurations and Cavity Vanes on Compressor Map Width and the Inducer Flow Field, J. Turbomach., 135, 041003 (2013) [CrossRef] [Google Scholar]
  20. N. Yamaguchi, The Development of Effective Casing Treatment for Turbocharger Compressors, In Proceedings of the IMechE Seventh International Conference, 14–15 May 2002, London, UK (2002) [Google Scholar]
  21. H. Tamaki, Effect of Recirculation Device on Performance of High-Pressure Ratio Centrifugal Compressor, In Proceedings of the Turbo Expo: Power for Land, Sea, and Air, Glasgow, UK, 14–18 June 2010, Volume 44021, pp. 1879–1889 (2010) [Google Scholar]
  22. H. Tamaki, Effect of recirculation device with counter swirl vane on performance of high-pressure ratio centrifugal compressor, J. Turbomach., 134, 051036 (2012) [CrossRef] [Google Scholar]
  23. P. X. L. Harley, A. Starke, T. Bamba, D. Filsinger, Axial groove casing treatment in an automotive turbocharger centrifugal compressor, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 232, 24, 4472-4484 (2018) [CrossRef] [Google Scholar]
  24. S. Leichtfuß, J. Bühler, H. P. Schiffer, P. Peters, M. Hanna, A Casing Treatment with Axial Grooves for Centrifugal Compressors, International Journal of Turbomachinery, Propulsion and Power, 4, 3, 27 (2019) [CrossRef] [Google Scholar]
  25. P. Gao, Y. Zhang, S. Zhang, Numerical investigation of the different casing treatment in a centrifugal compressor, In 2010 Asia-Pacific conference on wearable computing systems, pp. 51-54, IEEE (2010) [Google Scholar]
  26. X. Chen, Z. Ai, Y. Ji, G. Qin, Numerical investigation of a centrifugal compressor with a single circumferential groove in different types of diffusers, In Turbo Expo: Power for Land, Sea, and Air, Vol. 50800, p. V02CT44A004 (2017) [Google Scholar]
  27. C. Cravero, A design methodology for radial turbomachinery. Application to turbines and compressors, The 2002 Joint US ASME European Fluid Engineering Summer Conference paper FEDSM2002 31335, 14-18 July 2002, Montreal (2002) [Google Scholar]
  28. M. Bardelli, C. Cravero, M. Marini, D. Marsano, O. Milingi, Numerical Investigation of Impeller-Vaned Diffuser Interaction in a Centrifugal Compressor, Appl. Sci., 9, 1619 (2019) [CrossRef] [Google Scholar]
  29. M. Carretta, C. Cravero, D. Marsano, Numerical Prediction of Centrifugal Compressor Stability Limit, In Proceedings of the ASME Turbo Expo: Turbomachinery Technical Conference and Exposition, Charlotte, NC, USA, 26–30 June 2017, Paper GT201763352 (2017) [Google Scholar]
  30. C. Cravero, D. Marsano, Criteria for the Stability Limit Prediction of High-Speed Centrifugal Compressors with Vaneless Diffuser. Part I: Flow Structure Analysis, In Proceedings of the ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, Online, 21–25 September 2020; Paper GT2020-14579 (2020) [Google Scholar]
  31. C. Cravero, D. Marsano, Criteria for the Stability Limit Prediction of High-Speed Centrifugal Compressors with Vaneless Diffuser. Part II: The development of Prediction Criteria, In Proceedings of the ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, Online, 21–25 September 2020; Paper GT202014589 (2020) [Google Scholar]
  32. C. Cravero, P. J. Leutcha, D. Marsano, Simulation and modelling of ported shroud effects on radial compressor stage stability limits, Energies, Vol. 15, 7, p. 2571 (2022) [CrossRef] [Google Scholar]
  33. C. Cravero, D. Marsano, V. Sishtla, C. Halbe, W. T. Cousins, Numerical investigations of near surge operating conditions in a two-stage radial compressor with refrigerant gas, In Proceedings of the ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition, Boston, Massachussets, USA, 26–30 June 2023; Paper GT2023-102630 (2023) [Google Scholar]
  34. C. Cravero, D. Marsano, Numerical prediction of tonal noise in centrifugal blowers, In Turbo Expo: Power for Land, Sea, and Air, Vol. 50985, p. V001T09A001 (2018) [Google Scholar]
  35. P. Silvestri, S. Marelli, M. Capobianco, Incipient Surge Analysis in Time and Frequency Domain for Centrifugal Compressors, Journal of Engineering for Gas Turbines and Power, Vol. 143, 10, art. No. 101020 (2021) [CrossRef] [Google Scholar]
  36. C. A. N. M. D. H. Champ, P. Silvestri, M. L. Ferrari, A. F. Massardo, Incipient Surge Detection in Large Volume Energy Systems Based on Wigner–Ville Distribution Evaluated on Vibration Signals, Journal of Engineering for Gas Turbines and Power, Vol. 143, 7, art. no. 071014 (2021) [Google Scholar]
  37. F. Reggio, P. Silvestri, M. L. Ferrari, A. F. Massardo, Operation extension in gas turbine-based advanced cycles with a surge prevention tool, Meccanica, Vol. 57, 8, pp. 2117-2130 (2022) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.