EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 427 (2023) E3S Web Conf., 427 (2023) 03029 References
Open Access
Issue
E3S Web Conf.
Volume 427, 2023
International Conference on Geotechnical Engineering and Energetic-Iraq (ICGEE 2023)
Article Number 03029
Number of page(s) 8
Section Transportation Science and Technology
DOI https://doi.org/10.1051/e3sconf/202342703029
Published online 13 September 2023
  1. Serfass, J.P. Advantages. Peculiarities and mysteries of emulsion cold mixes. EUROPEAN ROADS REVIEW. SPECIAL ISSUE, RGRA2-2002. 2002. [Google Scholar]
  2. Ebels, L.-J. Characterization of material properties and behavior of cold bituminous mixtures for road pavements. Ph.D. thesis, Dept. of Civil Engineering, Stellenbosch Univ. 2008. [Google Scholar]
  3. Brown, S., and D. Needham. A study of cement modified bitumen emulsion mixtures. In Proc., Association of Asphalt Paving Technologists. Lino Lakes, MN: Association of Asphalt Paving Technologists. 2000. [Google Scholar]
  4. Thanaya, I.N.A., S. Zoorob, and J.A. Forth. Laboratory study on cold-mix, cold-lay emulsion mixtures. Proc. Inst. Civ. Eng. Transp. 2009; 162 (TR1): 47–55. https://doi.org/10.1680/tran.2009.162.1.47. [Google Scholar]
  5. Al-Busaltan, S., Al Nageim, H., Atherton, W. & Sharples, G. Green Bituminous Asphalt relevant for highway and airfield pavement. Journal of construction and building materials. 2012; 31(1). [Google Scholar]
  6. Karkush MO, Yassin SA. Using sustainable material in improvement the geotechnical properties of soft clayey soil. Journal of Engineering Science and Technology. 2020 Aug;15(4):2208–2222. [Google Scholar]
  7. Karkush MO, Abdulkareem MS. Deep remediation and improvement of soil contaminated with residues oil using lime piles. International Journal of Environmental Science and Technology. 2019 Nov;16:7197–7206. [CrossRef] [Google Scholar]
  8. Karkush MO, Yassin S. Improvement of geotechnical properties of cohesive soil using crushed concrete. Civil Engineering Journal. 2019 Oct 7;5(10):2110–2119. [CrossRef] [Google Scholar]
  9. Miljković, M., and M. Radenberg. Characterizing the influence of bitumen emulsion on asphalt mixture performance. Mater. Struct. 2015; 48 (7): 2195–2210. https://doi.org/10.1617/s11527-014-0302-y. [CrossRef] [Google Scholar]
  10. Wang, Z., Q. Wang, and T. Ai. Comparative study on effects of binders and curing ages on properties of cement emulsified asphalt mixture using gray correlation entropy analysis. Constr. Build. Mater. 2014. [Google Scholar]
  11. Tan, Y., J. Ouyang, J. Lv, and Y. Li. Effect of emulsifier on cement hydration in cement asphalt mortar. Constr. Build. Mater. 2013; 47(1):159–164. https://doi.org/10.1016/j. [CrossRef] [Google Scholar]
  12. Modarres, Amir; Ayar, Pooyan. Comparing the mechanical properties of cold recycled mixture containing coal waste additive and ordinary Portland cement. International Journal of Pavement Engineering. 2016; 17(3): 211–224. [CrossRef] [Google Scholar]
  13. Al-Hdabi, A., Al Nageim, and Seton, L. Superior Cold Rolled Asphalt Mixtures Using Supplementary Cementations Materials. Journal of Construction and Building Materials, ISSN: 0950-0618. 2014; 64(1): 95–102. [CrossRef] [Google Scholar]
  14. British Standard Institution BS 4987-1: Coated macadam (asphalt concrete) for roads and other paved areas —Part 1: Specification for constituent materials and for mixtures. 2005. [Google Scholar]
  15. ASTM, ASTM. D2397 Standard specification for cationic emulsified asphalt. West Conshohocken, PA. 2013. [Google Scholar]
  16. Khan, M.S., Ali, F., & Zaib, M.A. (2019). A Study of Properties of Wheat Straw Ash as a Partial Cement Replacement in the Production of Green Concrete. University of Wah Journal of Science and Technology (UWJST). 2019; 3(1): 61–68. [Google Scholar]
  17. Thanaya I. Improving the performance of Cold Bituminous Emulsion Mixtures (CAEMs) incorporating waste materials. PhD thesis. UK: University of Leeds. 2003. [Google Scholar]
  18. ASTM, ASTM. D6927-15 Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures. ASTM International: West Conshohocken, PA, USA. 2015. [Google Scholar]
  19. ASTM (2006), American Standard for Testing and Materials (ASTM D 6927-06): Standard Test Method for Marshall Stability and Flow of Bituminous Mixtures; [Google Scholar]
  20. ASTM C496/ C496M (2004). Standard test for splitting tensile strength of cylindrical concrete specimens. Annual book of ASTM Standards, Vol.04.02 concrete and aggregates, West Conshohocken, PA, United State. [Google Scholar]
  21. ASTM D1075-11. Standard Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures (Withdrawn 2019). [Google Scholar]
  22. Sirin, O., Paul, D.K., & Kassem, E. State of the art study on aging of asphalt mixtures and use of antioxidant additives. Advances in Civil Engineering. 2018. [Google Scholar]
  23. Kliewer, Julie E.; Bell, Chris A.; Sosnovske, Dan A. Investigation of the relationship between field performance and laboratory aging properties of asphalt mixtures. Engineering properties of asphalt mixtures and the relationship to their performance. 1995. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.